Double wire clamp 11 - 11.6mm

On this page you will find a stainless-steel water filter. Suitable for pumping the water of the pumps used on espresso machines manufactured by the Cimbali Group. This filter is used with the Casadio part number 490055000, Cimbali part number 490-055-000 and the Faema part number 490055000. This stainless-steel wire mesh filter has a outer diameter of...

This motor made by SMA Machinery with model number YSC102/60-4. The output of this motor is 150W at 220/240V at 50/60Hz. To start the espresso machine motor there is a 10 µf capacitor. This model type is a bolt on motor. The rotations pump is connected to the flange of the coffee machine motor with 2 M8 bolts. This style of connecting is quite common with...

Terminal block 3 poles FV273 40A 450V

The single phase thermostat on this page can be used on various espresso machine models of the La Cimbali Group. This thermostat can be used on various La Cimbali, Casadio and Faema espresso machine models. This single phase thermostat goes to 170 degree Celsius. This model has a manual reset. The capillary is 900mm. The bulb has a diameter of 4mm and a...

Most espresso machines use a analogue pressure switch, made by Asco(Sirai), Parker or Ma-ter. But the La Cimbali group has used for some of it’s espresso machines a pressure sensor. This pressure sensor is used on various Cimbali and Faema espresso machines. The La Cimbali part references are 537046900 and 537-046-900. For Faema the references are...

This heat exchanger support ring is used on La Cimbali brewing groups with the heat exchanger. This ring slides over the heat exchange itself and supports the copper heat exchanger. This ring is suitable in combination with the 210mm heat exchanger and the 150mm heat exchanger. The Cimbali part number used for this item is 457-165-028 This heat exchanger...

On this page you will find a small pump manometer, one of the smaller models. This model you mainly see used with the La Cimbali group. The la Cimbali part number for this item is 3781-133-399 and Faema part number is 3781133401  This manometer is a pump manometer with a pressure range of 0 – 16 bar. The rim diameter of this pressure gauge is 43mm and the...

On this page you will find a rubber like sleeve. This rubber like sleeve is a safety valve protection sleeve. This sleeve slides over a safety valve. When there is a over pressure and steam and water are coming out off the safety valve. This sleeve will catch it and with the side connection the water will flow to the drain. This item doesn’t come with the...