Terminal block 3 poles FV273 40A 450V

The product on this page is a silicone hose with shore 60. The internal diameter of this hose is 6mm and the outer diameter is 9mm, which means a wall thickness of 1,5mm. This silicone hose it made in Italy. This product is sold per M1

This type of fitting is used on various Faema and Cimbali espresso machines. The Faema and Cimbali part reference number for this item is 532652700. This T fitting is used in combination with 6mm ptfe tubing. This fitting can be used in a wide selection of Cimbali and Faema espresso machines. Ranging from the Cimbali M100, M39 to the smaller M24 models....

The anti-vacuum valve on this page is used on various espresso machine models of the La Cimbali group.  This anti depression valve has a variety of part references, these can be found in the extra info tab. This anti vacuum valve has been made from stainless steel. There is also a small cup with it, this is made from brass. The anti-vacuum valve has a...

Most espresso machines use a analogue pressure switch, made by Asco(Sirai), Parker or Ma-ter. But the La Cimbali group has used for some of it’s espresso machines a pressure sensor. This pressure sensor is used on various Cimbali and Faema espresso machines. The La Cimbali part references are 537046900 and 537-046-900. For Faema the references are...

The item on this product page is a capacitor made by the Italian company Ducati Energia. This capacitor can be used on various coffee grinder models of Eureka and Nuova Simonelli. The part reference number for Eureka is 1013.0005. The Ducati part reference is 41610.0864 This capacitor produces 5µF at 450V 50/60Hz. The operating ranges go from -25 degree C...

On this product page you will find a flowmeter, produced by the Italian company Gicar, mainly used on espresso machines of the La Cimbali Group. This flowmeter has the Casadio part reference 1455058, the Cimbali reference 534-393-100 and the Faema Reference 534393100. This flowmeter has a inlet and outlet, both have a female ¼” BSP-G thread. The nozzle...

The item on this product page is one of the smaller sizes of o rings. This o ring can be used with various brands such as La Spaziale, La Scala, Carimali, Gaggia and La Pavoni. This o ring has been made from the gasket material FKM. The cord diameter of this o ring is 1,78mm and the internal diameter is 3,69mm. This o ring has been made in Italy. You can...

On this product page you will find a flowmeter suitable for various brands of the La Cimbali Group. This flowmeter has been manufactured by the Italian company Gicar. The part references of Gicar for this item are 9.0.26.11G and 9.0.56.11G This flowmeter is made out of 2 pieces. The brass, low lead, casting and the measuring device which is made from a...