On this page you will find a clamp on rotation pump. This specific model Compact Plus (MO0154EAADN) has been made by the Italian company Fluid o tech in Italy.
This type of coupling is only used with a couple of coffee machine brands, which are all part of the La Cimbali Group. So, you will find them with the espresso machines Casadio, La Cimbali and Faema. This type of coupling is used on pump motors which have a bolt on flange. Screw 2 bolts in the flange and click the pump in place and tighten the bolts and you’re done.
The type of shaft on this Fluid o tech pump is also a bit different. It is a D shaft, round but with a flat edge. This shaft also requires a different type of motor coupling set then the square shafts. The length of the pump without the shaft is 74mm. The in and outlet fittings used on this pump are 3/8” BSP-G.
This specific model of pump can pump 150L/H and has a balanced bypass. To set the pump pressure on this pump you need screw the screw inwards to increase the pressure and the opposite to decrease the pressure.
Looking for similar items or different specifications for this Fluid o tech flange pump 150 L/H?
Explore our full range in the Casadio, La Cimbali, Pump categories
*
This part is compatible to the original part number. Part numbers are always leading.
The heating element on this page is mainly used on fully automatic espresso machines made by the company Faema and Cimbali. So this heating element is in dimensions quite small, but powerful.
This heating element produces 2700W at 220V, the element has 6 connecting terminals. The immersed length of this heating element is 160mm. In the middle of the...
The Italian solenoid manufacturer ODE is currently the only espresso machine solenoid manufacturer who makes some of their solenoid from the Techno polymer PPS. On this page you see a 3 way solenoid valve made from PPS with the part number 31APBA1R15-13T0
As mentioned before this is a 3 way solenoid valve with a flange. This flange mates against a other...
The heating element gasket on this page can be used in a variety of espresso machine models made by Casadio and Cimbali. The Casadio part number is 401194010 and the Cimbali part number is 401-194-000.
This gasket has been made from AFM34 by Victor Reinz. This gasket has a outer diameter of 58mm a inner diameter of 50 mm and a thickness of 2mm. The gasket...
This article is one of the earliest designs of the 60mm shower screen. This shower screen is made by IMS CFDR070. The border diameter is 60mm, it has a internal height of 15,7mm. The internal holes, 112 in total, have a diameter of 2mm
Note: this is not a specialty coffee shower, but IMS also produces normal showers.
This is, unlike other 60mm models, a...
The heating element on this page is used with the Cimbali Junior espresso machines, so not the La Cimbali M21 Junior. This is a different model, even it looks similar.
The La Cimbali part references for this item are 442501001, 442-501-001, 442767000, 442-767-000 and 490530000.
The heating element produces 1300W at 110V, there are 2 connecting poles. The...
The filterbasket shown on this page is solely used on La Cimbali espresso machines. The Cimbali part references for this item are 457164000 and 1 458171000. This basket has been manufactured by the Italian company IMS Filtri and has the product number GC2T049.
This stainless-steel filter basket has a outer diameter of 68mm and a overall height of 25mm....
This PTFE gasket is used as a sealing component in compatible Cimbali and Faema coffee machines. When the original gasket is worn, damaged or no longer sealing correctly, replacing it helps restore a reliable seal and proper machine operation.
Product details
Product type: PTFE gasket
Part number: 402302000
Dimensions: 17x13.2x1.5 mm
Suitable for:...
the steam valve knob on this page is suitable for a variety of La Cimbali espresso machines. This steam and water valve knob has the La Cimbali part reference of 492-902-000. This knob can be used on the La Cimbali M29 and the La Cimbali M22
This knob comes with the internal spring. The hole is D shaped and has a dia of 6x8mm.
Note: This knob looks a lot...
