The item on this page is silicone grease made by the company Molykote. This type of silicone is called Molykote 111 compount. This silicone grease is NSF certified and can be used in drinking water systems.
Maintaining your espresso machine properly is one of the most important things to keep your espresso machine in good condition. This means lubricating...
The grease on this product page is made by the German company Kluber. The type of grease is called Klubersynth UH1 14-151. This is a food safe grease which is ideal to use on components such as steam and water valves.
The grease is packed in a tube of 45grams. The temperature reach of the grease is minus 45 degree and + 120 degree Celsius. The grease has...
On this page you will find a OEM/Original dosing device for various La Carimali espresso machine models. The Carimali part reference of this item is 96.00821. The Gicar code for this item is 9.5.25.74G00
This dosing device is suitable for 1 to 3 espresso machine models which run on 230V. The name of this Gicar dosing device is 3d5 MAESTRO DELUXE SLAVE...
the item on this product page is a stainless steel split pin. This pin can be used on various steam and water valves used on Marzocco, Carimali, San Remo, Faema and La Scala espresso machines. The Carimali part reference number is 94.00092, the Faema part reference number is 4061024965, the Marzocco number is L165/8 and the San Remo part reference number...
The main manufacturer of espresso machine motor pumps comes from Italy and that is RPM. This coffee machine motor has also been manufactured by RPM, with the model number 11002755.
The motor procures 165W 220V with 50Hz. To start up the motor the capacitor needs 10 µf. The special thing with this motor. It has a junction box mounted on the side of the...
The level probe on this page is made by the Italian company Gicar. This level probe is used in a variety of espresso machines such as San Remo, Grimac and Astoria. The Astoria reference is 20258, the Grimac reference is GR212 and the San Remo part reference is 10112042. The Gicar part reference for this item is 9.0.81.02G
The level probe shown on...
The Ma-Ter XP 110 pressure switch. One of the most used pressure switch models. Mainly used in domestic espresso machines, but you will also find them in commercial espresso machines. Used on Bezzera, Astoria, Cimbali, ECM and Profitec espresso machines.
The thread is a ¼” BSP-G. The pressure reach is 0,5-1.5bar. It is pre-set at 1,0 bar. The switch is...
The item on this page is a 3 way solenoid valve made by the brand Lucifer. This item is slightly different, seen it’s not a standard 220/230V model. But it is a 110V model.
This 3 way valve can be used on a variety of espresso machine brands such as Casadio, Brugnetti, San Marco, La Scala, Cimbali, Grimac, Faema, Astoria, Nuova Simonelli, La...
The single filterbasket model shown on this page is mainly used on Astoria and Wega espresso machines. Note: this basket can be used on any portafilter which has a similar 70mm outer diameter filterbasket. This single coffee filterbasket has been made by the Italian filterbasket manufacturer IMS Filtri, their reference number for this item is CM1T007....
The o ring on this page is used to seal off the steam tip from the steam wand at the bottom. You can find this o ring with a variety of brands like Spaziale, Astoria and Wega espresso machines. With the part numbers of Spaziale 08354, Astoria 12300013 and Wega WY12300013.
This o ring has a cord diameter of 1,2mm and a internal diameter of 6mm. The o...