La San Marco PTFE HX gasket 34x27x2mm

The item on this product page is a flat heating element gasket. This gasket can be used on various La San Marco heating elements. The La San Marco part references for this item are CTSGUA0280, 109081 and 0803/F. This heating element gasket has been made from a fibre material. The outer diameter is 56mm the inner diameter is 47mm and the thickness is 3mm....

On this page you can find a o ring which is in use with a variety of brands in various configurations. You can find this o ring in water and steam taps, boiler components and in water level assemblies. This o ring is made from EPDM. The used cord diameter is 1,78mm and the internal diameter of the o ring is 10,82mm. This o ring can be used on steam and...

This cover is used for the steam tap section of compatible San Marco coffee machines. It is usually replaced when the original cover is worn, damaged, cracked, missing, or no longer fits correctly around the steam tap. Product details Brand: San Marco OEM part number: CMPSTA3710 Product type: Cover for steam tap Made in Italy Compatibility San Marco...

The solenoid valve on this page is a water inlet valve made by the company Parker, this valve has been manufactured in Italy. The parker part number is 397484 This solenoid valve has a inlet and outlet which have a ¼” BSP-G thread in the inside. The orifice in the middle of this valve has a diameter of 3mm and is sealed off with a FKM seal.  The coil used...

The portafilter gasket on this page is a OEM/Original San Marco spare part. The part reference for this item is 109130  The gasket has been made form NBR. The outer diameter is 64mm, the inner diameter is 52,5mm and the thickness is 5,5mm. The gasket has on the outside external cuts. This gasket has been made in Italy. You can use this gasket on San Marco...

The gasket on this page is made from PTFE and is suitable for some steam and water valves on San Marco espresso machine models. Models such as the La San Marco 85 and La San Marco 95. The San Marco part reference for this item is 109050  Note this conical shaped PTFE gasket is only suitable for the older models of steam and water valve which have...

This stainless steel compression spring is used in the inlet valve on various La San Marco espresso machines. The part reference of San Marco for this item is 200034  This compression spring is used as a valve return spring on various models. This spring has a diameter of 15mm and a length of 20mm. This spring has been made in Italy. You can use...

The main switch selector knob on this product page is a OEM/Original La San Marco spare part. This item has the San Marco part reference number 506709. This is the main selector switch knob. The knob itself has a diameter of 42mm and a square hole at the back which is 5x5mm. the knob is made in Italy. You can use this knob on the San Marco 100 S E, San...