La Spaziale Flowmeter hall sensor

It is possible that the flowmeter in your espresso machine starts to leak. On this page you will find a replacement part for most flowmeters. This is the sealing o ring which goes between the flowmeter body and the measuring device. This o ring is suitable for Digmesa and Gicar flowmeters. The cord diameter of this o ring is 1,78mm and the inner diameter...

On this product page you will find a flowmeter manufactured by the Italian company Gicar. This specific type of flowmeter is used in various Astoria and Wega espresso machines. The Gicar code of this item is 9.0.76.90G and 9.0.76.94G Most flowmeter have a internal thread, but this one has already brass fittings installed. So in this case the in and...

The item on this page is a connector with hall sensor. This item is used on a variety of La Spaziale and Dalla Corte espresso machines. The La Spaziale part reference number for this hall sensor is 3418. This item is made in Italy. You can use this sensor on a variety of La Spaziale espresso machines such as the S1, S2, S3, S8, S9, Special, Super 3000,...

This specific Gicar flowmeter can be used on various versions of the Domobar Super espresso machine. This flowmeter is compatible with the VBM part number ELETCONTVODOS.

This flowmeter has the part reference numbers 9.0.97.62G and 9.0.97.85G. It has on each side a ¼” BSP-G thread. The orifice in this valve has a diameter of 1,15mm. This flowmeter has been made in Italy and is nsf certified

On this product page you will find a flowmeter suitable for various brands of the La Cimbali Group. This flowmeter has been manufactured by the Italian company Gicar. The part references of Gicar for this item are 9.0.26.11G and 9.0.56.11G This flowmeter is made out of 2 pieces. The brass, low lead, casting and the measuring device which is made from a...

On this product page you will find a flowmeter made by the Swiss company Digmesa. This flowmeter is slightly different then normal. The only brand who uses this model of flowmeter if Faema and has the part reference 2251131855/2251-131855 This flowmeter has 1 inlet and 2 outlets. The inlet is a ¼” BSP-G as well as the outlets. The nozzle...

This item is a replacement part for a Gicar flowmeter and is used on a variety of espresso machines. Like San Marco, Vibiemme, Pavoni and Bezzera. For the complete list check the extra info tab. The Gicar part reference numbers for this item are 9.0.16.00G, 9.0.16.50G and 9.0.16.70G