0
My cart
List of products by brand Astoria
Keep your coffee service running smoothly with high-quality spare parts for Astoria CMA commercial espresso machines. From preventive maintenance to urgent repairs, having the right components on hand helps reduce downtime and protects drink consistency during busy service.
Our range covers key service parts for professional espresso setups, so your machine stays reliable in cafés, restaurants, hotels and other high-demand environments.
Female plug 1/4"
A plug is a generic item which can be used in a variety of espresso machines. This specific version of the female plus is one which has a ¼”BSP-G thread. You can use this type of fitting to seal off a variety of parts of your espresso machine, hydraulic system, brewing group valves and boiler
This part is used in brands like Astoria...
€3.66
Valve rod washer 12x8x1mm
The brass washer on this product page is used in various espresso machines made by Astoria and Wega. The Astoria part number for this item is 25655 and the Wega part number is WY25655.
This brass washer has a outer diameter of 12mm a inner diameter of 8mm and a thickness of 1mm. This washer is used to spread the pressure of the steam and water shaft...
€1.19
Astoria bottomless portafilter
The bottomless portafilter on this product page can be used on a variety of Astoria espresso machines. The Astoria part reference number for this item is 27311004.
The portafilter has a ear orientation of 45 degree, the ear thickness is 6mm. The portafilter does come with a double filter basket and stainless steel spring. This portafilter is made in...
€60.39
Compak grinder foot 28x14 mm
The machine foot on this product page can be used on various coffee grinders, but are OEM/Original Compak spare parts. Such with the brands Astoria, Wega and Compak. The part references are for Astoria 28360015 , Wega WY28360015 for Compak K...22 and TI.207
These machine foot have a diameter of 28mm and a height of 14mm. These feet are only sold per 4...
€6.11
Copper gasket flat 26x20x2mm
The product on this page is a flat copper gasket. This copper gasket can be used in various applications like water and steam tabs, water levels and water inlet tabs. This product can be found with brands like Astoria, Bezzera and Wega.
The outer diameter of this flat copper gasket is 26mm. The inner diameter of the gasket is 20mm and the thickness is...
€1.36
Brass washer 18x12x1mm
On this page you will find a brass washer which is suitable for the Astoria and Wega water level assembly. This washer makes sure that the gasket doesn’t tear when the sight glass nut is tightened. This washer has the Astoria reference 25652 and the Wega part is WY25652
This gasket has a outer diameter of 18mm a inner diameter of 12mm...
€2.08
Male plug 1/4"
One of the most universal items. The male brass plug. The plus on this page can be found in the catalogue of a variety of espresso machine manufacturers like Astoria, Faema, La Spaziale and Wega.
This specific plug has a male ¼”BSP-G thread. The height of this plug is 13 mm and the wrench size for this plug is 17mm.
€2.72
Double spout open with 3/8" thread
The double spout shown on this page can be used with a variety of espresso machine brands. Brands such as ECM Heidelberg, Bezzera, Astoria, Wega, Spaziale, Rancilio and Gaggia.
This double spout is from the type of open model. It has been casted from brass, machined and a nickel and chrome finish applied to it. The thread of the spout is a 3/8” BSP-G...
€7.77
Filterbasket 1 coffee 6gr 70x19.5mm
The single filterbasket model shown on this page is mainly used on Astoria and Wega espresso machines. Note: this basket can be used on any portafilter which has a similar 70mm outer diameter filterbasket. This single coffee filterbasket has been made by the Italian filterbasket manufacturer IMS Filtri, their reference number for this item is CM1T007....
€5.13
Bremas main switch knob
On this product page you will find a Bremas selector switch knob. This switch knob has the Bremas part references of M05G028N10 and M05G028N300.
This specific knob type does not have a central screw hole. It uses a small spring to keep in place on the switch shaft. The switch knob has a outer diameter of 33mm. The hole for the switch shaft is a hole of...
€11.17
Solenoid valve connector
The product on this page is a solenoid valve connector, large F fitting. With this connector you can seal off and connect your wiring and solenoid valve to each other.
These connectors can be used on all types of standard solenoid valve coils. Where the positive and negative are spaced apart approx. 17mm.
This solenoid valve connector can be basically...
€3.47
o ring gasket silicone 17.86x2.62mm
The o ring on this product page can be used on various espresso machine brands such as Astoria and Wega. The Astoria part reference for this item is 12300026 and for Wega WY12300026
This o ring has been made form silicone. The cord diameter is 2,62mm. the inner diameter of this o ring is 17,86mm. This item has been made in the UK.
You can use...
€2.16
Ulka Vibration pump EP5 41W 120V
The pump on this product page is made by the Italian company Ulka. This type of pump is called a vibration pump and doesn’t require a motor. This specific model is the EP5, the Ulka part reference number is 1.01.305.05/PA and the Ceme part refence numbers are 1.01.305.05/PA and 10130505PA.
This model of pump is the 120V 60Hz version of the EP5 and uses...
€31.16
Portafilter gasket 72x56x8mm silicone
The portafilter gasket model on this page is mainly used on Astoria and Wega espresso machines. But this gasket is not made from NBR but from food safe silicone. The Astoria part reference for this item is 12217 and the Wega part reference for this item is.
The gasket has a outer diameter of 72mm a inner diameter of 56mm and a thickness of 8mm. This...
€8.48
single coffee open 3/8
The partially open single spout shown on this page can be used with a wide selection of espresso machine brands. Brands such as Carimali, Brugnetti, San Marco, San Remo, Vibiemme, Grimac, Bezzera. You can use this single spout on every portafilter body you want of course, but the thread does need to be a 3/8” BSP-G
This single spout is from the...
€10.29
O ring 25,8x3,53mm EPDM
The item on this product page is a o ring which can be used on various brewing groups made by the Astoria CMA group, so on Astoria and Wega brewing groups. The Astoria part reference number for this item is 12300027 and for Wega it is WY12300027.
This o ring has been made from EPDM. The cord diameter is 3,53mm and the internal diameter is 25,8mm. This o...
€2.34
Crushable copper gasket 18.7x13x2.5mm
The item on this product page is a crushable copper gasket. This gasket can be used on various espresso machine brands such as Asotria, Wega, Elektra and Orchestrale. The Astoria part reference number for this item is 12100, for Wega the part reference number is WY12100.
This type of gasket is crushed when the fitting is tightened. The outer diameter is...
€1.34
Boiler pump manometer D 63 0-2.5 0-16 bar
On this page you can find a pressure gauge which can be used on various brands such as Astoria, Grimac and Wega. The part references are for Grimac 1250200031-GR034 , for Astoria 21109 and for Wega WY21109.
This pressure gauge is a double scale manometer. The scale for the boiler goes from 0 to 2,5bar. The scale for the pump pressure goes from 0 to 16...
€46.37
Level probe 1/4 125mm
The level probe on this page can be used on a variety of espresso machines. You can use this level probes on brands such as La Scala, Grimac, Faema, Astoria, La Pavoni, Wega and Rancilio.
This level probe has been made from stainless steel. The insulator is made from PTFE. The fitting is a male ¼” BSP-G thread. The overall length of this probe is 125mm....
€13.27
Thermostat 145° m4 with manual reset
The manual thermostat on this page can be used on various espresso machine models. You will find this thermostat on brands such as Faema, Astoria and Wega.
This thermostat is one with a manual reset. It shuts itself off at 145 degree Celsius. The thread at the bottom is a male M4.
You can use this thermostat on the Wega concept, Wega Mininova, Astoria CK,...
€7.57
Compak burrs 63.5mm rh
On this product page you will find a set off coffee grinding burrs. These grinding burrs can be used for various Compak, Astoria and Wega coffee grinders. The part references for this item are for Astoria 28217000, For Compak K...99 and for Wega WY28217000
These grinding burrs have a outer diameter of 63,5mm and a internal diameter of 38mm....
€42.94
O ring 14x1.78mm epdm
The o ring on this product page can be used on various espresso machine brands as well with various applications. You can find this o ring with the brands San Marco, La Scala, Astoria, Wega and Brasilia. For the part references check the extra info tab.
This o ring has been made from EPDM. The cord diameter is 1,78mm and the inner diameter is 14mm. This o...
€0.96
Astoria double portafilter
The portafilter on this product page is suitable for a broad selection of Astoria espresso machine models. The Astoria part reference for this item is 27311051 and 8327311051R
This double portafilter has a open spout, this spout has a thread of 3/8” BSP-G. The orientation of the ears is 45 degree. The portafilter does have a ear thickness of 6mm. This...
€63.54
Parts for professional espresso machine applications
Astoria CMA machines are built for daily commercial use where stable pressure, accurate temperature control and reliable steam and hot-water delivery are essential. Over time, wear items and control components naturally need replacement — and swapping them early can prevent bigger failures and costly interruptions.
Common Astoria CMA parts we can provide
Depending on the model and configuration, espresso machines typically require parts such as:
-
Group service parts (group gaskets, shower screens, diffusers and related hardware)
-
Steam and water valve components (valve internals, knobs/levers, seals and rebuild parts)
-
Solenoid valves and hydraulic components used for filling and brewing functions
-
Seals and O-rings for leak prevention and stable operation
-
Pumps and pump-related parts (where applicable)
-
Heating and temperature components (heating elements, thermostats, probes/sensors)
-
Pressure control parts (pressure switches, safety valves, expansion/relief components)
-
Electronics and controls (switches, keypads/buttons, relays, boards — model dependent)
Why the right parts matter
Correct replacement parts help maintain:
-
Consistent espresso extraction and stable brewing performance
-
Reliable steam power for milk service and workflow speed
-
Safe operation by keeping pressure and temperature components within spec
-
Lower total maintenance costs through fewer repeat repairs