This model of solenoid valve is quite a common design and used with a variety of espresso machine manufacturers. This specific solenoid valve is made by the Italian company ODE. But the difference is that this item is made from a Technopolymer PPS. The part number for this item is 21APBK1R15-RPT0
The specific item is a 3 way solenoid valve with a base flange. This flange mates at a other machined surface and is attached with 4 bolts. To seal the in and outlet of this solenoid valve there are 2 o rings installed. The orifice in the base has a diameter of 1,5mm and is sealed off in the closed position with a Ruby seal. The exhaust port on the top has a 1/8” bsp-g thread with a conical connection.
The coil used on this solenoid valve is a 230/240V with 50/60Hz, the coil number for this solenoid valve is BDV08230AY.
The maximum working pressure for the valve is 15 bar. The range fluid temperature for this solenoid valve is quite big. This goes from -40 degree Celsius all the way up to 180 degrees Celsius. The ODE solenoid valve has also got a NSF certification
On which brands of espresso machines can this solenoid valve be used? This ranges from Casadio 533894600R, La Cimbali 533-894-600R , Faema 533894600R, Nuova Simonelli 04100027, Rancilio 34040149, San Marco 108063UL and Victoria Arduino 04100027
Looking for similar items or different specifications for this Ode 3 way solenoid valve 230V PPS?
Explore our full range in the Astoria, San Marco, Ode solenoid valve categories
*
This part is compatible to the original part number. Part numbers are always leading.
The boiler valve on this page is one of the bigger ones. This specific boiler safety valve can be used on various Bezzera and Rancilio espresso machines. The Rancilio part references for this valve are 10060511 and 10060512. The Bezzera part references are 5965001 and 5965015.
This safety valve has a male ½” BSP-G thread. The pre-set calibrated pressure...
The steam tube grip on this page is suitable for steam tubes of 10mm in diameter. If you click this steam tube around your stainless steel or chrome plated steam tube you will never have the issue of burning your hands on the tube.
This rubber grip has part references to Brasilia espresso machines 11972.0.00.02 and San Remo espresso machines with the...
This item is a OEM/Original La San Marco spare part. This item is a brass gasket holder/spring guide. In one side there can be installed a gasket of 15x5,5x4mm. On the other side you can install the valve spring. This gasket holder is used in various steam and water valves, as well in the water inlet valves.
The part references for this La San Marco item...
The level probe on this page is a OEM/Original La San Marco spare part. This level probe has the part reference of CCMMIN0030 and 202237.
This level probe is installed in the boiler flange of various La San Marco espressomachines. Seen the location it isn’t straight, but slightly bent. The probe itself has been made from stainless steel. The...
The solenoid valve on this page is a 3 way solenoid valve, mainly with the application as a brewing group solenoid valve. Parker has listed this part under 471012 and 471013
The coil used on this solenoid valve is a 9W 220/240V which runs on 50/60Hz. The coil number for this solenoid valve is 483510S6
The valve in question is a 3 way solenoid valve with...
The dosing device on this page is suitable for the San Marco 100S. The La San Marco part reference for this item is 108650. This dosing control box is suitable for machines from 1 to 3 groups which run on 230V. This dosing device has been manufactured in Italy by the manufacturer Gicar, the Gicar part reference is 9.1.41.15G
The portafilter on this product page is suitable for almost every San Marco brewing group. The matching part references for this item is 4000154.
The San Marco portafilters have unlike most portafilters 3 ears instead of the standard 2. These ears have a thickness of 7,4mm. This part has been made in Italy.
Note: this part is not suitable for the SM...
This product is a heating element which you will only find on older models of the San Marco 85. This specific version of heating element is suitable for a 2 group machine.
The heating element itself produces 1300W at 220V and has 2 connection poles. The immersed length of this element is 330mm. the fitting has a diameter of 10mm. The heating element has...
