Sirai solenoid 2 way valve 1/8" 1/8" 230V 50/60Hz

The product on this page is a Allen head screw for attaching a solenoid valve to a other surface. This type is a M4x10mm. It is a stainless-steel bolt according to UNI 5931 - DIN 912 - ISO 4762 You will only need this type of Allen head screw to attach the flanged solenoid valves to a flat surface. This type of Allen screw is used in a lot of espresso...

The product on this page is a solenoid valve connector, large F fitting. With this connector you can seal off and connect your wiring and solenoid valve to each other. These connectors can be used on all types of standard solenoid valve coils. Where the positive and negative are spaced apart approx. 17mm. This solenoid valve connector can be basically...

The item on this page is a replacement coil and plunger used on the 24V water distribution block. This item can break down over time, or can start to leak. This product is a OEM/original Rancilio spare part 69140013, this product doesn’t have EU origin. You will find this solenoid valve coil and plunger on various Rancilio Models as well on the...

At some point you do need to replace the gaskets in your Rancilio distribution valve. For that reason Rancilio provides a rebuild kit. This kit comes with a variety of valve components, including 2 solenoid valves. One for the 24V version and the other one for the 230V. So you don’t have to use both of them. This kit has the part reference number 10700300...

Sirai 3 way solenoid valve 1/8" 1/8"230V 50/60Hz. Differential pressure 0-10bar (GAS), 0-8bar (Liquid), Maximun pressure 30bar. Temperature 0-130°C.

This o ring is one of the most common parts in the world of espresso machines. The main function of this o ring is to seal off a flanged solenoid valve. Every flanged solenoid valve uses 2 of these. But you will also find them in applications like steam and water valves and water inlet taps. The o ring has a wire diameter of 1,78mm and a internal diameter...

Sirai solenoid 2 way valve with base mounting 230V 50Hz