Vibiemme (VBM) Domobar espresso machine parts
Vibiemme (VBM) Domobar espresso machine parts
There are 68 products.The Vibiemme Domobar is one of the most well know espresso machine models around, with very good reviews over the time. This model, which originates from around the end of the 1970’s, of espresso machine is intended for domestic use. This model of VBM espresso machine has a lot features which you will also find on commercial espresso machines.
The Vibiemme Domobar espresso machine has been build in various types. You do recognize that they are Vibiemme espresso machines, but they do have various features installed on them you won’t find with other models.
The VBM Domobar has been build with features such as dual boilers, volumetric dosing, horizontal boiler, vertical boiler, water tank and so on. Below the categories we will discuss various versions of the VBM Domobar espresso machine.
Vibiemme heating element 1200W 230V
(0) On this page you will find a espresso machine heating element suitable for the Vibiemme Domobar Junior and for the Vibiemme Domobar Super (ELETRESD12230). This specific heating element gives 1200W with 230V at 50/60Hz. The connection on this specific model has 2 legs both with male 6,3x0,8mm connectors. The element itself is made from copper and the...
Thermal protector for vibration pump
(0) This is a extra layer of protection for your Ulka espresso machine vibration pump. When your pump is running dry or way too much then specified, the temperature will rise and eventually electrical components will break down. With this thermal protector your vibration pump will be saved, but the thermal protection will fail. This specific model has a max...
Ulka vibration pump damper 90degree
(0) On this page you will find a rubber support mount for a vibration pump. This support has 1 central hole and a mounting hole. The mounting hole is for connecting the rubber pump support to the frame of the espresso machine. The other hole is for sticking the espresso machine vibration pump true, this is a press fit. For each vibration pump you need 2...
O ring gasket FKM 10.78x2.62mm
(0) On this page you will find a o ring with the dimensions 10,78x2.62mm. It is made from FKM (viton is a registered trade brand, but the material is identical) This o ring is used in a variety of locations in espresso machines. It is used with steam and water wands in espresso machines with brands like: Marzocco, Casadio, Vibiemme, Grimac, Cimbali and Faema....
Bush pipe ball
(0) On this page you will find a brass steam pipe bushing. But what is a pipe bushing. A pipe bushing makes it possible to move the steam and water wand freely without leaking. So how does it work? Well the pipe bushing has on the valve side 2 o rings, these seal against the side of the inside of the valve. But on the top ring of the pipe bushing there is...
Safety valve 3/8'' 1,8 bar
(0) On this page you will find a boiler safety valve 3/8” male with a present of 1,8 bar. This safety valve is, at own responsibility, adjustable. This can be done by tightening or untightening the Allan key slot in the top of the valve. Inside this safety valve has a stainless steel spring inside, the sealing material is FKM. This is a non certified...
o ring gasket 7,2X1,9mm nbr
(0) On this page you will find the o ring with the cord diameter of 1,9mm and a internal diameter of 7,2mm. This specific o ring is used with a variety of applications in expresso machines. For instance, with Expobar in the water inlet valve. For Faema in the cappuccinatore. With Vibiemme, La Scala, Fiamma, Grimac, Brasilia, ECM Heidelberg and La Carimali in...
Faema E61 valve gasket 15,5x7,5x4mm
(0) This gasket is again such a standard type of gasket in the world of espresso coffee machines. It is the EPDM gasket 15.5x7.5x4mm. This gasket is used a variety of applications on espresso machines. Offcourse on the Faema E61 brewing group as well for the E61 style brewing group, as the camme shaft gasket. By brands like Isomac, Bezzera, ECM, Brasilia,...
Ffilterbasket 2 coffee 14gr 70x24,5mm
(0) The 2 coffee filterbasket on this page can be used a big variety of espresso machine brands. You can use this basket on brands such as Brasilia, Elektra, Victoria Arduino, Faema, Cimbali, Casadio, La Scala. This filterbasket has been made by the Italian company IMS Filtri. The IMS part reference is CF2T069. Note: this is not a competition...
Filterbasket 2 coffee 12gr 70x21mm
(0) The 2 coffee filterbasket on this page can be used a big variety of espresso machine brands. You can use this basket on brands such as Casadio, Brugnetti, ECM Heidelberg, San Remo, Faema, Vibiemme, La Scala, Grimnac. This filterbasket has been made by the Italian company IMS Filtri. The IMS part reference is CF2T068. Note: this is not a competition...
Brass half nut 3/8" 6mm hex 24
(0) This brass nut has a female thread of 3/8” bsp and a height of 6mm. The outer size is 21 or 24mm, this can vary sometimes and can’t be selected. So where is this brass hex nut used in espresso machines? You can find this model hex nut mainly on water and steam taps of brands like, Royal, La Spaziale, La Scala, Nuova Simonelli, Victoria...
Vibiemme upper sleeve
(0) This Vibiemme RACCCASUTEPI chrome plated drain sleeve is unique for e E61 style brewing group. Vibiemme is the only espresso machine manufacturer who uses this principle. This is being used for the Lever as well for the Solenoid brewing group. Instead of the screw in drain sleeve, as being used by brands like Faema, Bezzera, La Pavoni, La Scala and...
Vibiemme infusion valve 62mm
(0) This brewing valve is a complete valve assembly suitable for the Vibiemme E61 style lever brewing group.This complete valve exists out of 5 components. The triangular rod, a gasket holder, the gasket, a small brass washer and the square valve pin. All espresso machine parts make the total length of the valve assembly 62mm.The Vibiemme part number for this...
Drain valve assembly
(0) The drain valve is responsible for draining the last water out of the E61 style brewing group. This espresso machine part is made up out of 4 parts. The gasket holder, the gasket, small brass washer and a triangular valve rod. The total length of this part is 27mm. This drain valve used in a variety of espresso machine brands like: Expobar CTAV1-05,...
Portafilter gasket 73X57X8.5mm
(0) This portafilter gasket has a outer diameter of 73mm a inner diameter of 57mm and a thickness of 8,5mm. 73x57x8,5mm. This type of brewing group gasket is one of the most standard portafilters around. You will find this on the Faema E61 groups as well as on the E61 style groups used by Vibiemme, La Scala, Bezzera, San Remo, Fiorenzato and Grimac. Of this...
Anti vacuum valve 1/4"
(0) A Anti vacuum valve is used to prevent that the pressure switch is kicked in too early when heating up. This anti vacuum valve has a male screw thread of ¼” BSP. A anti vacuum valve exists out of multiple components. The body with the threads, in this case made from stainless steel. The plunger, made from brass. This plunger has also the...
IMS E61 style shower screen
(0) This shower screen style is one of the most used shower screens with espresso machines. It can be for instance used on the Faema E61 and E61 style brewing groups. This specific model of shower screen is made by IMS Filtri in Italy. But this is not a standard version, it is from their Competition series shower screens. This specific model is the E61200IM....
Thermostat 165° M4 manual reset
(0) This contact thermostat has a shut off temperature at 165 °celcius. In this case it is a manual espresso machine thermostat. That means that it needs to be pushed manually to reset. With a automatic one it will reset itself. On the bottom of this thermostat is a M4 male screw thread. You can screw the thermostat into a boiler for instance. For...
Models of the Vibiemme Domobar
In the text above was mentioned that there are various versions available of the Vibiemme Domobar, this does make sense seen there are over the time various new model versions introduced.
The Vibiemme Domobar
This version of the VBM Domobar is the oldest version. It can be easily identified with the fixed steam tube and the red electrical buttons on the front of the machine, which are integrated in the stainless steel front. In this stainless steel front you will find also the pump pressure gauge and the indicator lights
On this model of the Domobar you have a water tank on the back, from this water tank the water is pumped, with the help of a Ulka vibration pump into the boiler. This boiler can be powered with a 110V or a 230V heating element, which produces approx. 1350W.
On the front of the espresso machine you will find the brewing group, this is one of the type of a E61 Style. This specific model is a manual operated brewing group. The mechanism on the side functions to operate the internal components and to activate the pump switch to activate the Ulka vibration pump.
The Vibiemme Domobar Junior
This version of the Vibiemme Domobar is called the Junior, this version comes in 2 configurations. One is the Heat Exchanger(HX) and the other one is the Dual boiler model. The 2 configurations will be discusses separately.
The Vibiemme Domobar junior HX is one of the versions available of the Vibiemme Domobar. This espresso machine has on the front a water and a steam valve. The valve sticks out of the stainless steel front, seen with the older one only the knob was visible. In this stainless steel front you will find also a pressure gauge for the boiler and for the pump. On the back of the VBM Domobar HX you will find a water tank, which makes it ideal if you don’t have a main water line available.
The boiler used on this espresso machine is based on a HX principle, the model is a vertical oriented one. With on the top parts such as the pressure switch, level probe, safety valve and a vacuum valve.
The Vibiemme Domobar Junior Dual boiler
This is the other version of the VBM Junior coffee machine, with the biggest difference is that this espresso machine has 2 individual boilers. One is for the brewing group and the other one is for the steam and water valve. Both the boilers are fitted with a 600W heating element, this can be a 110V or 230V. One of the heating elements is controlled with a pressure switch and the other one with a thermostat.
This version of the Junior is also fitted with a water tank on the back, where the Ulka vibration pump is used to pump the water into the boilers and towards the brewing group. On this model this is also a manual E61 style of brewing group. On the front stainless steel panel you find various switches, pressure gauges and the steam and water valve. Below the brewing group you have the drip tray and drip grid. Don’t forget to regularly empty this.
The Vibiemme Domobar Super espresso machine is a bigger version of the Vibiemme Domobar espresso machine. The version is available in 4 versions. To say it simple a single boiler and a multi boiler system and a volumetric and a non volumetric version. These Domobar version have a variety of features
The Vibiemme Domobar Super Elletronica 2B
This version of the VBM Domobar is the volumetric version with 2 boilers, but that’s not all. The coffee boiler is powered with a 800W heating element and the steam boiler is powered by a heating element of 1200W. These heating elements are controlled for the steam/water boiler with a manual pressure switch and the coffee brew boiler is controlled with a thermal PID, which controls a relay.
Seen this is a volumetric version you will also find a flowmeter and a dosing device. On the front stainless steel panel you will find the push button panel for the coffee selection. As well as a pump pressure gauge and a boiler pressure gauge. But also the display of the thermal PID.
The brewing group used on this Domobar model is a e61 style of brewing group, but not a manual one this is a solenoid operated brewing group. Which is controlled by the touchpanel on top of the espresso machine.
The Vibiemme Domobar Super Elletronica HX
Other then the 2B (dual boiler) version of the VBM Domobar Super Elletronica is this the version with a Heat Exchanger (HX) boiler. in this boiler will find a single heating element which produces 1800W at 230V. Other features you will find on this boiler is a safety thermostat, various fittings, vacuum valve, safety valve and a level probe. The heating element is controlled with a mechanical pressure switch.
This is the “Elletronica” version which means that this is a volumetric versions of the Domobar Super. So that requires also some additional parts such as a dosing device, flowmeter and a touchpanel. This touchpanel can be found on the front of the machine, embedded in the stainless steel cover. In this cover you will also find other parts such as the pump pressure gauge and the boiler pressure gauge.
The brewing group, which is located on the front of the espresso machine, is fitted with a E61 Style of brewing group. Seen it is volumetric it is controlled with a solenoid valve, which is located underneath the brewing group. Which is covered with a small metal shield. This brewing group does use the same gaskets and portafilters as the manual brewing group of Vibiemme.
The next versions of the Vibiemme Domobar Super are the non volumetric ones, these versions are a little less complex then the volumetric ones described above. These are also 2 versions available of. This model is called the VBM Domobar Super Manuale
The VBM Domobar Super Manuale 2B
This version of the VBM Domobar is the manual version with a dual boiler, that is what the 2B indicates. For that reason there is a steam and water boiler and a separate coffee brewing boiler. The coffee boiler is powered with a 800W heating element and the steam and water boiler is fitted with a 1200W heating element. On the coffee boiler this heating element is controlled with a temperature sensor and on the steam/water boiler with a pressure switch.
On the front of the Super manuale you will find a small display where you can set the temperature for the coffee boiler. But you will also find a steam valve, water valve a pressure gauge for the pump and a manometer for the boiler.
At this location there is also the “manuale” brewing group installed, this is a e61 style of brewing group. But unlike with the “Elletronica” version this one is manually operated.
Vibiemme Domobar Digitale
The Latest addition to the Vibiemme Domobar line of espresso machines is the VBM Domobar Digitale. This espresso machine is fitted with a single coffee boiler, which does have a fitting for a steam valve. The boiler has a heating element installed of 1350W, which can be 110V or 230V. The control of the heating elements is done with a temperature sensor, when the thermal PID reads a too low temperature the element will go on when the temperature is reached then the element will turn off. This is done with the help of a Solid State Relay(SSR).
The control of the temperature of the boiler is done with the display and keyboard on the front of the espresso machine, this is integrated in the stainless steel front. Below the display you will find the E61 style of brewing group, this specific model of brewing group is based on the E61 brewing group but slightly different technically and aesthetically.