Vibiemme heating element 1200W 230V
search
  • Vibiemme heating element 1200W 230V
  • Vibiemme heating element 1200W 230V

Vibiemme heating element 1200W 230V


€57.66

€57.66 tax excl.

qty
Last items in stock

  GDPR Compliance

Protecting your personal data

  Shipping policy

Everything about shipping your order

  Return policy

all the inns and outs about our return policy

On this page you will find a espresso machine heating element suitable for the Vibiemme Domobar Junior and for the Vibiemme Domobar Super (ELETRESD12230).

This specific heating element gives 1200W with 230V at 50/60Hz. The connection on this specific model has 2 legs both with male 6,3x0,8mm connectors. The element itself is made from copper and the flange is casted brass with a thread cut into it. The diameter of the threaded section is 1”. The immersed length of the heating element is 95mm

The type of heating element gasket which is suitable for this Vibiemme Domobar heating element has the dimensions of 41x33x3mm or 42x33x3mm.

We always advice to remove the original heating element from the boiler and verify the dimensions of the technical data we have provided.

Vibiemme
13-001-L-1755278
1 Item

Data sheet

Brand
Vibiemme
part number
Vibiemme ELETRESD12230
Submerged length
95mm
Vibiemme
Domobar Junior
Domobar Super
Voltage
230V
Watt
1200W

This does depend of which brand of espresso machine you have. Some espresso machine brands don’t use a heating element thermostat at all. Most thermostats are interchangeable with each other, but always make sure that you use a single phase or a 3 phase version, check out the thermostats we have on our website

Well first of all the heating element flange, seen those are in most cases not interchangeable with each other. seen a Cimbali heating element won’t fit a Nuova Simonelli heating element due to the flange model. A other important feature is the length of the heating element. When it is too long, it won’t fit. When the element is too short you will get uneven heat distribution in the boiler.

Well descaling a heating element is quite simple. A heating element can be placed inside a water tight tube. But the flange can not be submerged, the chance that water gets inside the heating element is possible. Which shorts out the element and makes it unuasable.

To descale a heating element you can use Puly caff Calcinet descaler, this need to be dissolved into hot water. First remove the loose lime scale. If it doesn’t remove all the limescale, repeat the procedure.

A heating element only comes with a gasket when this is specified. If this is not specified a heating element gasket isn’t supplied with the element.

Comments (0)
No customer reviews for the moment.

8 other product