€164.60 tax excl.
GDPR Compliance
Protecting your personal data
Shipping policy
Everything about shipping your order
Return policy
all the inns and outs about our return policy
At some point the heating element on your espresso machine can fail, this is also the case with the Astoria elements. The item on this product page is a OEM/Original Astoria spare part and has the part reference number 4617054.
This element produces 2600/2831W at 230/240V and as 6 connecting poles. The immersion depth of the element is 315mm, the oval shaped flange has a hole spacing of 75mm. This oval flange has a width of 95mm and a height of 57mm. This unit is for 2 group espresso machines.
This heating element is used on a variety of Astoria CMA espresso machines. Ranging from the Argenta, to the Pratic and the Tanya.
Data sheet
This does depend of which brand of espresso machine you have. Some espresso machine brands don’t use a heating element thermostat at all. Most thermostats are interchangeable with each other, but always make sure that you use a single phase or a 3 phase version, check out the thermostats we have on our website
Well first of all the heating element flange, seen those are in most cases not interchangeable with each other. seen a Cimbali heating element won’t fit a Nuova Simonelli heating element due to the flange model. A other important feature is the length of the heating element. When it is too long, it won’t fit. When the element is too short you will get uneven heat distribution in the boiler.
Well descaling a heating element is quite simple. A heating element can be placed inside a water tight tube. But the flange can not be submerged, the chance that water gets inside the heating element is possible. Which shorts out the element and makes it unuasable.
To descale a heating element you can use Puly caff Calcinet descaler, this need to be dissolved into hot water. First remove the loose lime scale. If it doesn’t remove all the limescale, repeat the procedure.
A heating element only comes with a gasket when this is specified. If this is not specified a heating element gasket isn’t supplied with the element.
