Astoria heating element 2 group 2600W 230V
€70.58 tax excl.
Protecting your personal data
Everything about shipping your order
all the inns and outs about our return policy
The heating element on this page is one of the more common heating elements used with Astoria and Wega espresso machine boilers.
The Astoria part number is 17051 and the Wega part number for this element is WY17051
The heating element on this page produces 2600W at 230/240V. the heating elements has 4 connecting poles. In between these connectors is a spare tube for placing a heating element thermostat. The immersed length of this heating element is 300mm. The flange used on this heating element is 95x57mm. The heating element gasket has a outer diameter of 57mm a inner of 43mm and a thickness of 3mm
You can find this heating element on various Astoria espresso machines like the Astoria Argenta, Astoria Brava, Astoria Denise, Astoria Dora, Astoria Lisa, Astoria Pratic, Astoria Rapallo and the Astoria Vania.
Data sheet
- Astoria CMA
- Argenta
Brava
Calypso
Compact
Denise
Divina
Dora
Gloria
Lisa
Perla
Pratic
Pratic new
Rapallo
Rapallo AL
Sibilla
Vania - Brand
- Astoria
Wega - part number
- Astoria 17051
Wega WY17051 - Submerged length
- 300mm
- Type part
- Heating element
- Voltage
- 230/240V
- Watt
- 2600W
- Wega
- Airy
Colosseum
Espressa
Euro-2000
Formula-Milano
Junior
Mininova
Nova
This does depend of which brand of espresso machine you have. Some espresso machine brands don’t use a heating element thermostat at all. Most thermostats are interchangeable with each other, but always make sure that you use a single phase or a 3 phase version, check out the thermostats we have on our website
Well first of all the heating element flange, seen those are in most cases not interchangeable with each other. seen a Cimbali heating element won’t fit a Nuova Simonelli heating element due to the flange model. A other important feature is the length of the heating element. When it is too long, it won’t fit. When the element is too short you will get uneven heat distribution in the boiler.
Well descaling a heating element is quite simple. A heating element can be placed inside a water tight tube. But the flange can not be submerged, the chance that water gets inside the heating element is possible. Which shorts out the element and makes it unuasable.
To descale a heating element you can use Puly caff Calcinet descaler, this need to be dissolved into hot water. First remove the loose lime scale. If it doesn’t remove all the limescale, repeat the procedure.
A heating element only comes with a gasket when this is specified. If this is not specified a heating element gasket isn’t supplied with the element.