Best sellers

There are 2633 products.

Sort by:
Sales, highest to lowest Name, A to Z Name, Z to A Price, low to high Price, high to low
Showing 751-780 of 2633 item(s)
La Cimbali single spout M16 La Cimbali single spout M16

La Cimbali single spout M16

On this product page you will see a coffee spout which model can only be found with a few brands. These brands are Faema and Cimbali. But you can use this single coffee spout with any brand you would like. Note this is a M16 thread instead of the commonly used 3/8” BSP-G threads This coffee spout has been made from casted and machined brass which...
€11.40
Quick-view
Nuova Simonelli/Victoria Arduino Adonis steam tube Nuova Simonelli/Victoria Arduino Adonis steam tube

Nuova Simonelli/Victoria Arduino Adonis steam tube

This product page shows a stainless steel steam tube which is suitable for various Nuova Simonelli and Victoria Arduino espresso machines. The Victoria Arduino part reference is 75006037 and the Nuova Simonelli part reference of this item is 75006037.1  This stainless steel steam tube has on the valve part a 3/8”BSP-G thread and on the...
€42.94
Quick-view
O ring gasket 8.73x1.78mm O ring gasket 8.73x1.78mm

O ring gasket 8.73x1.78mm

The o ring on this product page can be used on various espresso machine brands such as Astoria, Vibiemme Cimbali, Wega, Gaggia. With various applications such as water inlets and steam and water valves. The part reference numbers can be found in the extra info tab. This o ring has been made from EPDM. The o ring has a cord diameter of 1,78mm and a...
€0.79
Quick-view
La Cimbali M28 steam water valve handle La Cimbali M28 steam water valve handle

La Cimbali M28 steam water valve handle

This steam and water valve handle can be used on the La Cimbali M28 espresso machine. The La Cimbali part reference for this item is 435713000 and 435-713-000. This Cimbali M28 steam valve handle comes with the handle spring. The hole is D shaped, so it will fit the standard Cimbali steam valve axles.
€37.93
Quick-view
Faema E92 SX lever Faema E92 SX lever

Faema E92 SX lever

This steam and water valve knob body is for the left hand valve is only used on the Faema E92 espresso machines. The part reference for this item is 902146000 . This item has been manufactured in Italy. This specific model is for the right hand side of the machine. For the right side of the machine you need to have part reference 902035000
€21.99
Quick-view
Spring 14x45mm Spring 14x45mm

Spring 14x45mm

The compression spring on this product page is used on various water inlet systems of Astoria CMA espresso machines. You will find this spring with the brands Astoria and Wega. The part references for Astoria are 10451 and for Wega W10545/WY10451. This stainless steel spring has a outer diameter of 14mm and a overall length of 45mm. You can use...
€2.60
Quick-view
Level regulator RL0 1E/1S/4C/F 230VAC Level regulator RL0 1E/1S/4C/F 230VAC

Level regulator RL0 1E/1S/4C/F 230VAC

On this page you will find a regulator made by the company Giemme. This level regulator is suitable for various Gaggia, Astoria and Wega espresso machines. The matching part numbers are Wega WY18045, Astoria 18045 and Gaggia 5008003000  This model is the RL0 1E/1S/4C/F this model is suitable for 230Vac. The Giemme code is 01.03.0036. This...
€165.12
Quick-view
Level probe 1/4 100mm Level probe 1/4 100mm

Level probe 1/4 100mm

The level probe shown on this page is only used for Astoria and Wega espresso machines. The Astoria part reference for this item is 20261 and the Wega part reference is WY20261. This level probe has been made from stainless steel. The insulator is made from PTFE. The fitting used is a male ¼” BSP-g thread. The overall length of this item is 100mm. You can...
€9.09
Quick-view
Flex pipe 385mm 3/8 ff with 1 conical elbow Flex pipe 385mm 3/8 ff with 1 conical elbow

Flex pipe 385mm 3/8 ff with 1 conical elbow

On this page you will find a stainless steel flex hose suitable for various application with kitchen, coffee and espresso machines. This specific model of flex hose is also suitable for the US market, seen this hose has a NSF certification. This specific flex hose has a overall length of 385mm. On each side there is a female 3/8”BSP-G fitting. The fitting...
€8.96
Quick-view
La Cimbali pressure switch membrane La Cimbali pressure switch membrane

La Cimbali pressure switch membrane

The diaphragm on this product page can be used in pressure switches mainly used in La Cimbali Models, but you can also find it in a Faema espresso machine. The Cimbali part references for this item are 468007020 and 468-007-020. For Faema the part reference is 468-007-020. This diaphragm is used in the Cimbali pressure switch 537-030-700. Over time...
€17.46
Quick-view
Carimali manometer boiler pump 0-2.5bar / 0-16bar Carimali manometer boiler pump 0-2.5bar / 0-16bar

Carimali manometer boiler pump 0-2.5bar / 0-16bar

On this product page you will find a double scale manometer which can be used on various La Carimali espresso machines. The Carimali part reference for this item is 95.01545  This double scale manometer has on the pump side a scale of 0 to 16 bar and on the boiler side a scale going from 0 to 2,5bar. The body of this manometer has a diameter of 60mm...
€60.02
Quick-view
Bezzera boiler manometer 40mm 0-3 bar Bezzera boiler manometer 40mm 0-3 bar

Bezzera boiler manometer 40mm 0-3 bar

On this product page you will find a boiler pressure gauge which can be used with various brands such as Bezzera and ECM Heidelberg. The part reference for Bezzera is 7432522 and for ECM Heidelberg is B7432516  This boiler pressure gauge goes from 0 to 3 bar. The case of this manometer has a diameter of 39mm, the frame is 44mm. The connection at the back...
€23.53
Quick-view
Nuova Simonelli Oscar heating element 1200W 230V Nuova Simonelli Oscar heating element 1200W 230V

Nuova Simonelli Oscar heating element 1200W 230V

This heating element is used for a single group Nuova Simonelli espresso machine. This model of heating element can only be found on the Nuova Simonelli Oscar espresso machine. The part reference for this item is for Nuova Simonelli 14100040. This heating element produces 1200W at 230V and has 2 connecting poles. The immersed length of the element is...
€78.47
Quick-view
San Remo heating element 2700W 230/380V 1 1/4" San Remo heating element 2700W 230/380V 1 1/4"

San Remo heating element 2700W 230/380V 1 1/4"

The heating element on this page is suitable for a 2 group San Remo espresso machine. The San Remo part reference for this item is 10455052  The heating element produces 2700W with 230/380V, there are 6 connecting poles. This element has a immersed length of 325mm. The element has a screw in flange which has a diameter of 1”1/4. In the middle...
€115.34
Quick-view
La Cimbali M39 blue display La Cimbali M39 blue display

La Cimbali M39 blue display

The display on this page is a blue display suitable to use with a variety of models from La Cimbali and Faema espresso machines. Note: this is not a green/yellow display. The matching part numbers for La Cimbali 913-902-018 and for Faema 913902018. The blue display is suitable for a variety of traditional espresso machines as well super automatic espresso...
€235.87
Quick-view
Faema E98 touchpanel Faema E98 touchpanel

Faema E98 touchpanel

On this product page you will find a touchpanel membrane for the Faema E98 espresso machine. The part reference for this item is 3301134927. This touchpanel membrane has in total 5 pre-set volumetric keys. The bottom key is the continuous and the programming key. With this programming key you can adjust the volumetric keys. This item has been made in...
€60.70
Quick-view
Faema E61 legend pump motor Faema E61 legend pump motor

Faema E61 legend pump motor

Where the classic Faema E61 espresso machine had a external motor. The Faema E61 Legend and Faema E61 jubilé has a internal espresso machine motor. The motor used in a Faema E61 legend and Jubile is made by Elettromeccanica Ing F. Arduini and has 150W with 230V 50-60Hz. To start the motor there is a condenser installed of 10 µf. The coffee machine motor...
€260.91
Quick-view
La Carimali bottomless portafilter La Carimali bottomless portafilter

La Carimali bottomless portafilter

On this page you will find a bottomless portafilter for Carimali espresso machines. Carimali, next to La San Marco uses 3 ears instead of the commonly found 2 ears. This portafilter can solely be used on Carimali brewing groups. The portafilter has 3 ear lugs instead of the traditional 2. And have a thickness of 6mm. The portafilter itself has been...
€67.38
Quick-view
La San Marco portafilter single spout La San Marco portafilter single spout

La San Marco portafilter single spout

On this page you will find a portafilter which is suitable for various San Marco espresso machine models. The model used by San Marco is unique in it’s own way with the 3 ears and the classical rounded off handle. The San Marco part reference for this item is 1165080 The portafilter has 3 ears, These ears have a thickness of 7,4mm. This specific...
€60.92
Quick-view
Faema E61 lever knob Faema E61 lever knob

Faema E61 lever knob

The handle knob on this page can be used on Faema E61 brewing groups. This handle goes on the brewing group control lever. Originally these were made from Bakelite, but nowadays that isn’t made that much anymore. The Faema part reference fort his item is 4741135910  This plastic lever brewing group handle is made from a shiny plastic. In the middle is a...
€12.04
Quick-view
Brass half nut 3/8" Brass half nut 3/8"

Brass half nut 3/8" 21x6mm

Brass fittings used on espresso machines are generic items, seen they are used in quite a lot of coffee machines. This specific model is a nut with a 3/8” BSP-G thread with a height of 6mm. The wrench size used for this item is a 21. Which models use this 3/8” BSP-G nut.? Well you can find this nut with brands like: Gaggia, Saeco, Victoria Arduino,...
€2.03
Quick-view
Female plug 1/8" Female plug 1/8"

Female plug 1/8"

The item on this page is a female plug. This female plug can be used with a variety of espresso machine applications. You can use this fitting to plug male threads, don’t forget to order a gasket or thread sealant! This plug has a 1/8” BSP-G thread on the inside. The fitting is made from brass. In some cases it is possible that you get a nickel plated...
€1.73
Quick-view
Nipple 1/4"M x 3/8"M Nipple 1/4"M x 3/8"M

Nipple 1/4"M x 3/8"M

The item on this product page is a brass fitting. This fitting has on 1 side a male thread of ¼” BSP-G and on the other side a male thread of 3/8”BSP-G.This brass fitting has been made in Italy. This type of fitting can be found with various espresso machine brands such as Astoria, Grimac, La Carimali, La Spaziale, Nuova Simonelli, La Pavoni, Wega,...
€3.47
Quick-view
T fitting brass 1/8 MMM T fitting brass 1/8 MMM

T fitting brass 1/8 MMM

The fitting on this page is called a T fitting, seen it has the shape of the letter T. This type of fitting can be used on various espresso machine brands such as Casadio, Cimbali and Grimac. The Casadio part references for this item are 555000050 and 555000050R. for Cimbali the references are 555000050, 555-000-050, 555000050R and 555-000-050R....
€4.31
Quick-view
Rocket A349908601 Portafilter Gasket 8mm – Made in Italy Rocket A349908601 Portafilter Gasket 8mm – Made in Italy

Rocket OEM A349908601 Portafilter Gasket 8mm

This genuine Rocket Espresso portafilter gasket (OEM code A349908601) has a thickness of 8 mm, ensuring a secure and reliable seal for consistent espresso extraction. Manufactured in Italy using high-quality materials. OEM part number: A349908601 Thickness: 8 mm Durable rubber composition Made in Italy Compatible with Rocket Espresso machines:...
€4.82
Quick-view
Frange Clump Crusher Eureka Mythos – OEM Part J4100.0083 Frange Clump Crusher Eureka Mythos – OEM Part J4100.0083

Frange Clump Crusher Eureka Mythos – OEM Part J4100.0083

The Frange Clump Crusher is an essential OEM part for Eureka Mythos coffee grinders. With part number J4100.0083, this component is made in Italy, ensuring high-quality construction and durable performance. It effectively helps in breaking down clumps for consistent, even coffee grinds, making it a valuable replacement part for maintaining the performance...
€3.30
Quick-view
Green Indicator Light 230V – Universal HoReCa Use Green Indicator Light 230V – Universal HoReCa Use

Green Indicator Light 230V – Universal

This green indicator light runs on 230V and is suitable for various HoReCa appliances. The compact design includes a head diameter of 13.5 mm and a mounting hole of 10 mm. Heat resistant up to 120°C, this light is a reliable choice for professional equipment. Voltage: 230V Color: Green Head diameter: 13.5 mm Mounting hole diameter: 10 mm Heat resistance:...
€2.07
Quick-view
DPS35‑058N Electric Pump – OEM ICE TECH DPS35‑058N Electric Pump – OEM ICE TECH

Electric Pump DPS35‑058N

Introducing the Electric Pump DPS35‑058N, an OEM spare part designed for ICE TECH icemaker applications. This high‑quality pump is engineered and manufactured in Germany to meet exact OEM specifications. Key Specifications: Voltage/Power: 230V, 40W, 50Hz Fittings: 23.5 mm diameter ITV Part Number: 8687K Origin: Made...
€121.83
Quick-view
Brooks Parts | Bicone soldering fitting 8mm tubing Brooks Parts | Bicone soldering fitting 8mm tubing

Bicone soldering fitting 8mm tubing

This soldering fitting is a bicone model, which is different then the regular ones. This specific model is used in combination with 8mm copper tubing and with the dedicated 3/8” BSP nut.
€0.53
Quick-view