Bicone soldering fitting 8mm tubing

This soldering fitting is a bicone model, which is different then the regular ones. This specific model is used in combination with 10mm copper tubing and with the dedicated 3/8” BSP nut which can hold a 10mm copper tube.

On this product page you will find a brass welding cap. These welding caps are soldered to the ends of copper tubes in combination with a welding nut. This round surface seals off when the nut it tightened. This specific welding cap is used with a 8x1mm copper tube. The welding end nut used with this end cap is a 3/8”BSP-G with a internal diameter...

This messing brass nut is used in combination with a solder fitting. The thread on the inside is a female 1/4” BSP-G thread. The height of the nut is 16mm and the central hole for this nut is 6mm. This brass solder nut can be used in combination with for instance a 6mm bicone tube fitting or with the ogive welding cap which has a outer diameter of 4.2mm,...

A welding end cap nut is used to put pressure on the welding cap so it seals against the conical surface of it. Once there is not enough pressure from the back from the welding cap nut, the seal won’t work. There are a variety of sizes welding cap nuts, some interchangeable with various welding caps. The brass welding cap nut in this page has a ¼” BSP-G...

A welding end cap nut is used to put pressure on the welding cap so it seals against the conical surface of it. Once there is not enough pressure from the back from the welding cap nut, the seal won’t work. This type of welding end cap is slightly different then the standard types of caps. You will see this type of fitting for instance on the water level...

On this product page you will find a brass welding cap. These welding caps are soldered to the ends of copper tubes in combination with a welding nut. This round surface seals off when the nut it tightened. The brass material compresses and this seals off the valve. At some point this seal will leak. This small size you see that it is used in combination...

This messing brass nut is used in combination with a solder fitting. The thread on the inside is a female 3/8” BSP-G thread. The height of the nut is 16mm and the central hole for this nut is 10mm. This brass solder nut can be used in combination with for instance a 10mm bicone tube fitting or with the ogive welding cap which has a outer diameter of 10mm,...

For espresso machines you have a wide selection of soldering/welding caps. This is also the case for the brands of Gruppo Cimbali. They have a specific welding end cap soldered on their tubing, You can find this welding end cap on brands such as Casadio, Cimbali and Faema. This specific soldering cap is used in combination with 8mm copper tubing. Besides...