Welding end cap tube 10 mm nut 3/8"

This messing brass nut is used in combination with a solder fitting. The thread on the inside is a female 3/8” BSP-G thread. The height of the nut is 16mm and the central hole for this nut is 10mm. This brass solder nut can be used in combination with for instance a 10mm bicone tube fitting or with the ogive welding cap which has a outer diameter of 10mm,...

This product is used in combation with the Cimbali/Faema bicone soledering cap. This is a product you will only find on Cimbali espresso machines. The brass nut itself has a female ¼” BSP-G thread. this specific model is only used for 8mm copper, the central hole is 8,4mm. This item is made in Italy.

A welding end cap nut is used to put pressure on the welding cap so it seals against the conical surface of it. Once there is not enough pressure from the back from the welding cap nut, the seal won’t work. Welding cap nuts can be interchangeable for various sizes of welding end caps. This is the biggest size of welding end cap nut. This fitting...

A welding end cap nut is used to put pressure on the welding cap so it seals against the conical surface of it. Once there is not enough pressure from the back from the welding cap nut, the seal won’t work. This type of welding end cap is slightly different then the standard types of caps. You will see this type of fitting for instance on the water level...

This soldering fitting is a bicone model, which is different then the regular ones. This specific model is used in combination with 8mm copper tubing and with the dedicated 3/8” BSP nut.

On this product page you will find a brass welding cap. These welding caps are soldered to the ends of copper tubes in combination with a welding nut. This round surface seals off when the nut it tightened. The brass material compresses and this seals off the valve. At some point this seal will leak. This small size you see that it is used in combination...

On this product page you will find a brass welding cap. These welding caps are soldered to the ends of copper tubes in combination with a welding nut. This round surface seals off when the nut it tightened. This specific welding cap is used with a 8x1mm copper tube. The welding end nut used with this end cap is a 3/8”BSP-G with a internal diameter...

A welding end cap nut is used to put pressure on the welding cap so it seals against the conical surface of it. Once there is not enough pressure from the back from the welding cap nut, the seal won’t work. There are a variety of sizes welding cap nuts, some interchangeable with various welding caps. The brass welding cap nut in this page has a ¼” BSP-G...