![Welding end cap dia 10 nut 1/2" Welding end cap dia 10 nut 1/2"](https://brooks-parts.com/9429-large_default/welding-end-cap-tube-dia-10mm-12-nut.jpg)
![Welding end cap dia 10 nut 1/2" Welding end cap dia 10 nut 1/2"](https://brooks-parts.com/9429-large_default/welding-end-cap-tube-dia-10mm-12-nut.jpg)
€2.17 tax excl.
Protecting your personal data
Everything about shipping your order
all the inns and outs about our return policy
On this product page you will find a brass welding cap. These welding caps are soldered to the ends of copper tubes in combination with a welding nut. This round surface seals off when the nut it tightened. The brass material compresses and this seals off the valve. At some point this seal will leak.
This is the biggest size of welding fitting you can find for espresso machines. This type of fitting can be found on the water level of a Faema E61 espresso machine. But also on variety of other situations.
Even though this is one of the biggest sizes of welding caps, the tube size isn’t the biggest. The type of copper tube used is a 10mm tube, with a wall thickness of 1mm. The type of welding fitting used in combination with this solder fitting is one with a female ½” BSP-G thread. With a central hole of 15mm.
In the accessory tab you will find the matching items.
Data sheet
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent
Write your review
Review sent
Your review cannot be sent