Bicone soldering fitting 12mm tubing

On this product page you will find a brass welding cap. These welding caps are soldered to the ends of copper tubes in combination with a welding nut. This round surface seals off when the nut it tightened. The brass material compresses and this seals off the valve. At some point this seal will leak. This type of brass welding cap is the smallest welding...

On this product page you will find a brass welding cap. These welding caps are soldered to the ends of copper tubes in combination with a welding nut. This round surface seals off when the nut it tightened. The brass material compresses and this seals off the valve. At some point this seal will leak. This small size you see that it is used in combination...

On this product page you will find a brass welding cap. These welding caps are soldered to the ends of copper tubes in combination with a welding nut. This round surface seals off when the nut it tightened. The brass material compresses and this seals off the valve. At some point this seal will leak. This can be used on various applications in a espresso...

A welding end cap nut is used to put pressure on the welding cap so it seals against the conical surface of it. Once there is not enough pressure from the back from the welding cap nut, the seal won’t work. Welding cap nuts can be interchangeable for various sizes of welding end caps. This is the biggest size of welding end cap nut. This fitting...

For espresso machines you have a wide selection of soldering/welding caps. This is also the case for the brands of Gruppo Cimbali. They have a specific welding end cap soldered on their tubing, You can find this welding end cap on brands such as Casadio, Cimbali and Faema. This specific soldering cap is used in combination with 8mm copper tubing. Besides...

On this page you will find a brass welding cap. These welding caps are used to make a water tight seal between valve components and the copper tubing. This specific model of welding cap needs for soldering 10mm copper tubing. The weld nut used in combination with this welding cap has a 3/8”female thread and a opening in the middle of 13mm. For the...

On this product page you will find a brass welding cap. These welding caps are soldered to the ends of copper tubes in combination with a welding nut. This round surface seals off when the nut it tightened. The brass material compresses and this seals off the valve. At some point this seal will leak. This is the biggest size of welding fitting you can...

This messing brass nut is used in combination with a solder fitting. The thread on the inside is a female 1/4” BSP-G thread. The height of the nut is 16mm and the central hole for this nut is 6mm. This brass solder nut can be used in combination with for instance a 6mm bicone tube fitting or with the ogive welding cap which has a outer diameter of 4.2mm,...