Brasilia espresso machine parts
The steam valve bushing on this page is used in one of the most common steam and water valves used. This item can be used with brands such as Marzocco, La Carimali, San Remo, La Scala, Faema, La Pavoni and BFC.
Against this brass bushing seats a valve shaft spring. This bushing pushes against 2 o rings which seal off the steam valve shaft.
This bushing...
€1.00
Faema E61 valve gasket 13x4x4mm
The valve gasket on this page can be used on numerous of espresso machine brands such as Vibiemme, Wega, La Scala, Faema, La Pavoni, Brasilia and Grimac. This gasket in mainly used in the steam and water valves as well as in the water inlet valves. But the best example is in the E61(type) of brewing groups. The part reference list can be found in the...
€0.59
Ulka vibration pump EAXS5 120V with brass outlet
Ulka vibration pump EAXS5 120V with brass outlet. Max pressure 15 bar, Max flow rate 650 cc/min. Correct working: 1 min. ON / 1,5 min. OFF.
€34.23
Spring for steam and water valve 10,5x32mm
This steam and water valve compression spring is one of the most used compression springs. You will find them with a variety of espresso machine brands such as Faema, Pavoni, La Scala, Vibiemme, la Marzocco and San Remo. The part references can be found in the extra info tab.
This stainless-steel compression spring has a outer diameter of 10,5mm and a...
€1.10
Anti vacuum valve 1/4" stainless steel
The anti-vacuum valve on this page can be used on various espresso machine models of the brand San Remo. The anti vacuum valve has the San Remo part reference of 10652040A
This anti vacuum valve has been made from stainless steel. The thread used is a male ¼” BSP-G thread. This stainless steel anti vacuum valve has been made in Italy...
€9.46
Brasilia steam tap screw
The item on this product page is a steam and water valve screw, used on various Brasilia espresso machines. The Brasilia part reference number for this item 00107.4.00.04
This articulating valve screw is used in combination with the spring washers and the conical PTFE gaskets to seal off the valve. This item has been made in Italy.
You can use...
€16.14
Brasilia tap rod spring 7x33mm
The item on this product page is a compression spring used in various water inlet systems of Brasilia espresso machines. The Brasilia part references for this item are 02218.0.00.03, 0221800003 and 17694.0.00.03.
This compression spring has a outer diameter of 7mm and a length of 33mm.
You can use this spring on the Brasilia Cadetta, Brasilia...
€1.93
Boiler top fitting 1/2"
The top HX boiler fitting, a generic item you will find with a lot of espresso machine brands. This ranges from Vibiemme, Grimac, Pavoni, La Scala to Expobar, Brasilia and BFC.
This specific item is a casted brass fitting. The side which is screwed into the HX is a ½”BSP-g and the side where the tube to the brewing group goes to is also a...
€15.17
O ring 25,07x2,62mm EPDM
The o ring on this product page is used on various Brasilia steam and water valves on various models. The Brasilia part references for this item are 05825.0.00.02 and 0582500002.
This o ring is made from EPDM. The cord diameter is 2,62mm and the internal diameter is 25,07mm. This o ring is made in Italy.
You can use this o ring on the...
€0.89
Solenoid valve screw M4x10
The product on this page is a Allen head screw for attaching a solenoid valve to a other surface. This type is a M4x10mm. It is a stainless-steel bolt according to UNI 5931 - DIN 912 - ISO 4762
You will only need this type of Allen head screw to attach the flanged solenoid valves to a flat surface.
This type of Allen screw is used in a lot of espresso...
€0.63
Solenoid valve silicone o ring 6,07x1,78mm
This o ring is one of the most common parts in the world of espresso machines. The main function of this o ring is to seal off a flanged solenoid valve. Every flanged solenoid valve uses 2 of these. But you will also find them in applications like steam and water valves and water inlet taps.
The o ring has a wire diameter of 1,78mm and a internal...
€0.53
Faema E61 group upper plug
On the top of a Faema E61 brewing group or a E61 brewing group is always the final item. That’s a chrome plated 3/8” male plug. Nothing else nor something special.
This is generic part which can also be used in a variety of situations then a E61 brewing group, but also on different locations on a espresso machine. Like on the boiler with a...
€4.10