This 3 way solenoid valve is one of the most commonly found solenoid valves. The part is produced by Parker in Italy. This valve is mainly used as a brewing group solenoid valve. The remaining water from the group comes out of the outlet at the top. The Parker part numbers for this item are 393107J and 393112J
This solenoid valve is a 3 way valve. The type is a flanged type, to seal off the solenoid there are 2 small o rings at the bottom. The drain side is a male 1/8” BSP-G thread which has a conical shape. The coil used on this valve is a 220/230V version, which uses 9 W. The coil number is a ZB09.
The orifice inside this valve is 1,3mm and is sealed off with a Ruby seal.
The pressure and temperature limits of this vary. The minimum temperature is -30 degree Celsius and the maximum fluid temperature is 140 degree Celsius. The maximum working pressure for this valve is 20 bar.
Looking for similar items or different specifications for this Parker 3 way solenoid valve 220/230V?
Explore our full range in the Astoria, Bezzera, Brasilia categories
*
This part is compatible to the original part number. Part numbers are always leading.
This specific solenoid valve body is the model 3019F1GRG7. It has on the top a female drain which has a 1/8” BSP-G thread. The central hole, orifice, has a diameter of 1,5mm and is sealed of with a ruby seal. The coil itself is rated up to 14 bar pressure. The housing is made from stainless steel and is NSF rated. The temperature rating is from -40 degree...
The solenoid valve on this product page is made by the company Parker. This specific model of solenoid valve is used on the Faema E71 espresso machine. The Faema part reference number for this solenoid valve is 533903100F. This specific model of solenoid valve is used on the water outlet tube.
This Parker solenoid valve has a coil which is a 9W 24V...
On this page you will find one of the most used brewing group solenoid valves in espresso machines. But this is instead of a 230V version a 115V version. This solenoid valve has been manufactured by the company Parker. The Parker parts reference for this solenoid valve is 393106J or 393111J
This 3-way solenoid valve is a model with a flat flange, this...
On this page you will find a Parker 2 way solenoid valve. This solenoid valve can be used on Astoria (18159002), San Remo (10303093A) and Wega (WY18159002) water inlet valves. The Parker part number for this solenoid valve is 2019F1GRG7XS03XS6
This 2 way solenoid valve is of the new design, so no brass base but a stainless steel one which is NSF...
The solenoid valve on this page is a water inlet valve made by the company Parker, this valve has been manufactured in Italy. The parker part number is 397484
This solenoid valve has a inlet and outlet which have a ¼” BSP-G thread in the inside. The orifice in the middle of this valve has a diameter of 3mm and is sealed off with a FKM seal. The coil used...
On this page you will find a 2 way solenoid valve manufactured by the company Parker, this specific valve has been produced in Italy. This solenoid valve is mainly used as a water inlet valve and a steam and water valve solenoid. The Parker part numbers for this item are 397442 and 397443.
This solenoid valve is a version which has a female threaded in...
This solenoid valve body is made by the brand Parker. The valve body is called the PM128IV. This specific type of valve body is a 3 way valve, with on the top a 1/8” BSP-G exhaust port. Inside the valve you have a central hole, orifice, which has a diameter of 1,3mm. This hole is sealed of with a FKM seal. The plunger it seals of is rated up to 20bar.
On this page you will find a threaded 2 way solenoid valve. This solenoid valve is made by Parker, this item ahs been manufactured in Italy. This valve is mainly used as a boiler filling valve, due to the big size of Orifice.
This valve has 2 female 1/8” BSP-G connections, the in as well as the outlet. The orifice of this valve is 2,5mm and the...
