Faema Stylema - Water valve
Faema Stylema - Water valve
There are 15 products.Faema Stylema Water valve espresso machine parts
La Cimbali group gigleur 0,8mm
(0) The nozzle/gigleur is used on a couple of Cimbali brewing groups. This nozzle is not located inside the brewing group, as you see with most gigleurs. But it is installed inside the tubing at the flowmeter or close to the brewing group. This item has multiple part numbers you will find those at the extra info tab. This gigleur has a outer diameter of 14mm...
La Cimbali stainless steel group filter...
(0) On this page you will find a stainless-steel wire mesh filter. This filter is placed before the gigleur/nozzle so that it won’t get blocked by some sort of foreign debris. The La Cimbali part number for this item is 481361000 This stainless-steel filter has a outer diameter of 9mm and the filter has a thickness of 1,5mm. On which models can...
La Cimbali copper gasket for gigleur...
(0) On this page you will find a copper gasket suitable for a variety of La Cimbali brewing groups. This gasket is mainly used to seal off the gigleur/nozzle underneath the brewing group. The La Cimbali part number for this gasket is 401234000. This gasket is a flat copper gasket. The gasket has a outer diameter of 14mm a inner diameter of 10mm and a...
Microswitch Rold VRSRB1DA1
(0) This microswitch can be used with a huge variety of coffee grinders. This ranges from Casadio, San Marco, La Cimbali, Vibiemme, Cunhill, Eureka, La Spaziale, Brasilia and so on. For the complete list check the extra info tab for brands, models and product codes The specific microswitch is mainly used as a doser microswitch in the coffee doser. This...
Tap joint gasket 14.5x7.5x6 mm
(0) On this page you will find a PTFE gasket which is the coupling between the steam and water valve ball and the compression spring inside the valve assembly. This item has the Casadio part number 485078010, the La Cimbali part number 485-078-010 and the Faema part number 485078010. This PTFE gasket, it is not white as you would expect with PTFE, has a...
O ring gasket 10.82x1.78mm
(0) On this page you can find a o ring which is in use with a variety of brands in various configurations. You can find this o ring in water and steam taps, boiler components and in water level assemblies. This o ring is made from EPDM. The used cord diameter is 1,78mm and the internal diameter of the o ring is 10,82mm. This o ring can be used on steam and...
La Cimbali faema tap joint spring 11x24mm
(0) On this product page you will find a stainless-steel water and steam valve compression spring. This spring has multiple purposes. It holds the steam and water wand at a fixed location and keeps pressure on the PTFE ball gasket. This compression spring can be used with the brands Casadio (485061010 ) Cimbali (485061010) and Faema (485061010) This...
PTFE gasket 22x17x1,5mm
(0) The PTFE gasket on this page is mainly used for machines made by the Cimbali group. You will find this PTFE gasket in hydraulic circuits, brewing groups, steam and water valves and water inlet valves. The Casadio part number for this gasket is 401183010, the Cimbali Part number is 401183010 / 401-183-010 and for Faema the part number is...
Water outlet filter
(0) The item on this product page is a water tube filter element. This water tube filter element can be used on various espresso machines of the La Cimbali group. Such as Faema, Cimbali and Casadio. The Casadio part reference is 532305000. The Cimbali references are 4771134699, 4771-134-699, 532305000 and 532-305-000. For Faema the references are...
IMS filter basket removal tool
(0) When you want to clean your portafilter at the end of the day you need to remove the filter basket from the portafilter. But these baskets are normally held in place with the internal spring and can be difficult to remove. Instead of removing the basket with a spoon IMS Filtri has made a filter basket removal tool. This tool is made from stainless...
Flat epdm gasket 20,5x15x2mm
(0) the item on this page is a flat gasket which is used in water outlets of brands such as Casadio, Cimbali and Faema. The part refence numbers for this part can be found in the extra info tab. This gasket has been made from EPDM. The outer diameter is 20,5mm the inner diameter is 15mm and the thickness is 2mm. this gasket has been made in Italy. This...
Valve rod spring
(0) The compression spring on this page can be found in various applications with various brands with Faema and La Cimbali espresso machines. With La Cimbali you can find them in some type of brewing groups. For Faema as well, but mainly as the pressure spring of the water tube. The Cimbali part reference for this compression spring is 4731-030-495/...
O ring EPDM 1.78x6.75mm
(0) The o ring on this product page can be used with various espresso machine brands in steam and water valve. You can find them with brands such as Casadio, ECM Heidelberg, Cimbali, Grimac, Faema and Nuova Simonelli. This o ring has been made from EPDM. The cord diameter for this o ring is 1,78mm and the internal diameter is 6,75mm. This o ring has been...
Cimbali / Faema water tab body
(0) The item on this page is a water tap body which can be used on various espresso machine brands such as Faema and Cimbali. You can find this water tab body for instance with the part reference of Cimbali 407014000/ 407014005 and 407014008. For Faema the part references are 407014000 and 407014008. This water tab body has casted and machined. The...
Lucifer 2 way solenoid valve 240V 1/8"
(0) The solenoid valve on this product page is a 2 way solenoid valve which is mainly used on espresso machines of the Cimbali group. You can find this solenoid valve with Faema and Cimbali espresso machines This specific solenoid valve has been made by Lucifer (the valve shows parker, that is the main company) the parker part reference for this item is...
