Gaggia FD2000 - Brewing group

The screw on this page is used to keep the shower screen attached on various Gaggia espresso machines. The Gaggia part reference for this item is WGADI0964-5X8I. This screw is a slotted stainless-steel screw, with a male M5 thread which has a length of 8mm. This screw has been made according to UNI 6110 - DIN 964 - ISO 2010. You can use this screw on...

This o ring is one of the most common parts in the world of espresso machines. The main function of this o ring is to seal off a flanged solenoid valve. Every flanged solenoid valve uses 2 of these. But you will also find them in applications like steam and water valves and water inlet taps. The o ring has a wire diameter of 1,78mm and a internal...

On this product page you will find a contact thermostat which is used on a variety of espresso machine brands. You will find this contact thermostat on Brasilia, Gaggia and Isomac espresso machines. The part references are for Brasilia 09415.2.00.08, Gaggia WGADM1561 and for Isomac IS000281.  This contact thermostat is set at 100°C and is a...

The item on this page is a portafilter gasket, which is suitable for various espresso machine brands such as Conti, Synesso, Gaggia and Saeco. The part references for Conti are 002700, 002710 and 002711, For Gaggia and Saeco the references are NG01/001 and WGANG01/001/B. finally for synesso the reference is 1.3445. This gasket has a outer...

In some cases, the shower screen is attached with a screw, in most cases that is a Philips or a slotted screw. It is difficult to remove it with a regular screwdriver due to the limited height under the brew group.  But for that you need a shortened slotted screwdriver, in this case the one from the German brand Wera, which fits well under the brewing...

This 3 way solenoid valve is one of the most commonly found solenoid valves. The part is produced by Parker in Italy. This valve is mainly used as a brewing group solenoid valve. The remaining water from the group comes out of the outlet at the top. The Parker part numbers for this item are 393107J and 393112J This solenoid valve is a 3 way valve. The...

On this page you will find a small cartridge heating element. This specific heating element can be used in Gaggia espresso machines. The matching part number for this item is DM1804/001 This specific heating element produces 80W at 240V. This element has a outer diameter of 12mm and a overall length of 55mm. You will find this heating element on Gaggia...

O ring silicone 1.78x6.07mm

This o ring is one of the most common parts in the world of espresso machines. The main function of this o ring is to seal off a flanged solenoid valve. Every flanged solenoid valve uses 2 of these. But you will also find them in applications like steam and water valves and water inlet taps. The o ring has a wire diameter of 1,78mm and a internal...

It is quite common on espresso machines that the shower screen in the brewing group is attached with a screw. The issue is that the space between the brewing group and the drip tray is quite often too little for a normal screwdriver. For that reason we have the Wera short version screwdrivers. This specific model is suitable to use in combination with a...

The portafilter gasket on this product page is a OEM/Original Gaggia spare part. The Gaggia part reference for this item is WGANG01/001/B. Note: this is a gasket used on commercial Gaggia espresso machines. The outer diameter of this gasket is 72, the inner diameter is 56mm and the thickness is 8,5mm. This gasket has been made from NBR. This OEM...

The shower screen shown on this page is one used on various commercial espresso machines made by Gaggia. This model shower screen has been made by IMS filtri. The part reference for this item is IMSDR323. Note: this is not a competition shower screen. This stainless steel shower screen has a outer diameter of 55mm. The central hole is suitable for a M5...