Filter by
Manufacturers
Type part
more... less
Type
Price
€ €
Filter

Gaggia FE2000

Gaggia FE2000 espresso machine parts

Solenoid valve silicone o...

Solenoid valve silicone o ring 6,07x1,78mm

This o ring is one of the most common parts in the world of espresso machines. The main function of this o ring is to seal off a flanged solenoid valve. Every flanged solenoid valve uses 2 of these. But you will also find them in applications like steam and water valves and water inlet taps. The o ring has a wire diameter of 1,78mm and a internal diameter...
€0.66
Quick-view
O ring 3.69x1.78mm viton O ring 3.69x1.78mm viton

O ring 3.69x1.78mm FKM

The item on this product page is one of the smaller sizes of o rings. This o ring can be used with various brands such as La Spaziale, La Scala, Carimali, Gaggia and La Pavoni. This o ring has been made from the gasket material FKM. The cord diameter of this o ring is 1,78mm and the internal diameter is 3,69mm. This o ring has been made in Italy. You can...
€0.52
Quick-view
Steam valve gasket 15x6x6mm Steam valve gasket 15x6x6mm

Steam valve gasket 15x6x6mm

the item on this product page is a flat valve gasket. This gasket can be used on various espresso machine brands such as La Pavoni, Saeco and Gaggia. The Gaggia part reference is WGARB0709, for Saeco it is WGARB0709 and for La Pavoni it is 362055.   The gasket is made from EPDM. The outer diameter is 15mm the inner diameter is 6mm and the...
€2.20
Quick-view
Parker 3 way solenoid valve 220/230V Parker 3 way solenoid valve 220/230V 50/60Hz conical

Parker 3 way solenoid valve 220/230V

This 3 way solenoid valve is one of the most commonly found solenoid valves. The part is produced by Parker in Italy. This valve is mainly used as a brewing group solenoid valve. The remaining water from the group comes out of the outlet at the top. The Parker part numbers for this item are 393107J and 393112J This solenoid valve is a 3 way valve. The...
€83.33
Quick-view
Brass half nut 3/8" Brass half nut 3/8"

Brass half nut 3/8" 6mm hex 24

This brass nut has a female thread of 3/8” bsp and a height of 6mm. The outer size is 21 or 24mm, this can vary sometimes and can’t be selected. So where is this brass hex nut used in espresso machines? You can find this model hex nut mainly on water and steam taps of brands like, Royal, La Spaziale,  La Scala, Nuova Simonelli, Victoria Arduino and La...
€3.28
Quick-view
O ring gasket EPDM 10.77x2.62mm O ring gasket EPDM 10.77x2.62mm

O ring gasket EPDM 10.77x2.62mm

The o ring on this page can be used in various applications in espresso machines. This ranges from water and steam valves, water inlet taps and water levels. The part on this page is a O ring made from the material EPDM. This o ring has a cord diameter of 2,7mm and a inner diameter of 12,1mm. This o ring is produced in Italy. You will find this o ring...
€1.55
Quick-view
Gaggia shower screen 55mm Gaggia shower screen 55mm

Gaggia shower screen 55mm

The shower screen shown on this page is one used on various commercial espresso machines made by Gaggia. This model shower screen has been made by IMS filtri. The part reference for this item is IMSDR323. Note: this is not a competition shower screen. This stainless steel shower screen has a outer diameter of 55mm. The central hole is suitable for a M5...
€4.68
Quick-view
O ring gasket 32,93x2,62mm FKM O ring gasket 32,93x2,62mm FKM

O ring gasket 32,93x2,62mm FKM

The o ring on this product page can be used on a variety of espresso machine brands and in various applications. You can find this o ring on brands such as ECM Heidelberg, La Scala, Bezzera, Cimbali, Grimac, La Spaziale, Brasilia and Gaggia. With applications such as water and steam valves and on brewing groups. The part references codes can be found in...
€2.87
Quick-view
Wera shower screen screwdriver slotted Wera shower screen screwdriver slotted

Wera shower screen screwdriver slotted

In some cases, the shower screen is attached with a screw, in most cases that is a Philips or a slotted screw. It is difficult to remove it with a regular screwdriver due to the limited height under the brew group.  But for that you need a shortened slotted screwdriver, in this case the one from the German brand Wera, which fits well under the brewing...
€13.54
Quick-view
Gaggia portafilter gasket 72x56x8.5mm original Gaggia portafilter gasket 72x56x8.5mm original

Gaggia portafilter gasket 72x56x8.5mm original

The portafilter gasket on this product page is a OEM/Original Gaggia spare part. The Gaggia part reference for this item is WGANG01/001/B. Note: this is a gasket used on commercial Gaggia espresso machines. The outer diameter of this gasket is 72, the inner diameter is 56mm and the thickness is 8,5mm. This gasket has been made from NBR. This OEM...
€5.29
Quick-view
Procon clamp ring pump 180 L/H Procon clamp ring pump 180 L/H

Procon clamp ring pump 180 L/H

The rotary vane espresso machine pump. There are various brands which manufacture these pumps like Fluid o tech, Nuert and Procon. The pump on this page is made by the company Procon. Part number 132A060F123B The pump on this page is called a rotary vane clamp pump. The pump is clamped on a flange with a stainless steel clamp. If you tighten this clamp...
€158.76
Quick-view
Safety valve 3/8"m 1.8bar CE/PED Safety valve 3/8"m 1.8bar CE/PED

Safety valve 3/8"m 1.8bar CE/PED

The boiler safety valve is used on a variety of espresso machine brands such as San Marco, La Scala, Nuova Simonelli, Victoria Arduino and Gaggia. The Gaggia part reference for this item is WGADM1380/003, the Nuova Simonelli part references are 98013001, 98013000  and 98013022. For San Marco the references are 205426 and CSCSIC0020. The Victoria Arduino...
€30.92
Quick-view
Gaggia shower screen screw M5x8 stainless Gaggia shower screen screw M5x8 stainless

Gaggia shower screen screw M5x8 stainless

The screw on this page is used to keep the shower screen attached on various Gaggia espresso machines. The Gaggia part reference for this item is WGADI0964-5X8I. This screw is a slotted stainless-steel screw, with a male M5 thread which has a length of 8mm. This screw has been made according to UNI 6110 - DIN 964 - ISO 2010. You can use this screw on the...
€1.71
Quick-view
Gaggia shower screen holder Gaggia shower screen holder

Gaggia shower screen holder

The item on this product page is a shower holder which can be used on various Saeco and Gaggia espresso machines. The Gaggia part reference numbers for this item are 16G1002  and WGA16G1002. The Saeco part reference number for this item is WGA16G1002. This shower holder diffuser has been made from brass. The external diameter is 57mm and the height is...
€32.47
Quick-view
Gaggia XD heating element 2 gr 4000/4760W 230V Gaggia XD heating element 2 gr 4000/4760W 230V

Gaggia/Pavoni heating element 2 gr 4000/4760W 230V

The heating element on this page can be used on various 2 group Gaggia and La Pavoni espresso machines. The Gaggia part reference for this item is 11003362 and the La Pavoni part reference is 331153 . This heating element produces 4000/4760W at 220/240V, the element has 6 connecting terminals. The immersed length of the element is 310mm. The flange is has...
€118.75
Quick-view
Level probe 125mm 1/4" Level probe 125mm 1/4"

Level probe 125mm 1/4"

The level probe on this page is used with a variety of espresso machine brands. Such as Brasilia, Gaggia and La Pavoni. The Brasilia part reference for this item is 00649.4.00.08, the Gaggia part reference is WGADM1935 and the La Pavoni part reference is 438023. This stainless-steel level probe has a PTFE insulator. The inner fitting is a 1/8” BSP-G and...
€13.59
Quick-view
Pavoni/Gaggia Brass gasket holder Pavoni/Gaggia Brass gasket holder

Pavoni/Gaggia Brass gasket holder

The item on this product page is a OEM/Original Pavoni spare part. But this item can also be used on Saeco and Gaggia espresso machines. The Gaggia part reference is WGARB0708, the Saeco part reference is WGARB0708 and for La Pavoni it is 314014.  This gasket holder is made from machined brass. The outer diameter is 17mm, the inner diameter is 15mm. This...
€9.77
Quick-view
Wera shower screen screwdriver philips Wera shower screen screwdriver philips

Wera shower screen screwdriver philips

It is quite common on espresso machines that the shower screen in the brewing group is attached with a screw. The issue is that the space between the brewing group and the drip tray is quite often too little for a normal screwdriver. For that reason we have the Wera short version screwdrivers. This specific model is suitable to use in combination with a...
€12.87
Quick-view
Gaggia steam and water valve Gaggia steam and water valve

Gaggia steam and water valve

The steam and water valve on this page can be used on a variety of Gaggia espresso machine models. The Gaggia part reference for this item is RB0740/A  This valve has been casted out of brass and comes as a complete kit. This item has been made in Italy. You can use this valve on the Gaggia Deco, Gaggia XE, Gaggia XD, Gaggia TS, Gaggia E90, Gaggia...
€76.10
Quick-view
Water level nut Water level nut

Water level nut

This sight glass fitting is used on a variety of espresso machine brands such as Vibiemme, La Scala, Brasilia and Gaggia. The Brasilia part reference is 00089.0.10.04 , the Gaggia reference is LV0505 and the Vibiemme (VBM) part references are RACCP227 and RACCP427. This sight glass fitting has a male 3/8” BSP-G thread. The central hole is...
€6.42
Quick-view
O ring FKM 3,53x41,28mm

O ring FKM 3,53x41,28mm

The o ring on this page is used with various espresso machine models as a group locking gasket and as a heating element gasket. This o ring can be used on the Fiorenzato Piazza San Marco and Gaggia. The Fiorenzato part reference is A1200046 and the Gaggia part reference is WGADM0041/093  This o ring has been made from FKM. The cord diameter is 3,53mm and...
€8.42
Quick-view
Fluid o tech rotary vane pump 100 L/H 3/8" Fluid o tech rotary vane pump 100 L/H 3/8"

Fluid o tech rotary vane pump 100 L/H 3/8"

The rotation pump on this page is one of the more common pump types. This specific model is made by Fluid o tech and is from the “Standard “series. The part number for this pump is PA0104ANANN0000 The pump has a flowrate of 100 L/h and it is equipped with a balanced bypass. The fitting connections on the pump are 3/8” NPT (national pipe thread). If you...
€108.28
Quick-view