Grimac - Water level
Grimac - Water level
There are 8 products.Grimac espresso machine parts water level
O ring gasket FKM 10.78x2.62mm
(0) On this page you will find a o ring with the dimensions 10,78x2.62mm. It is made from FKM (viton is a registered trade brand, but the material is identical) This o ring is used in a variety of locations in espresso machines. It is used with steam and water wands in espresso machines with brands like: Marzocco, Casadio, Vibiemme, Grimac, Cimbali and Faema....
Sight glass red lines 11x140mm
(0) The level gauge on this page can be used on various espresso machine brand such as San Remo, Gaggia and Grimac. The San Remo part reference for this item is 10402100, for Gaggia LV0524 and for Grimac it is GR270 This sight glass has a outer diameter of 11mm and a overall length of 140mm. This sight glass has a red line running over the back and a Minimum...
Sight glass gasket 16x10x8mm
(0) The sight glass gasket on this page can be used with a variety of espresso machine brands. Such as Royal, Grimac, Astoria, Wega, Victoria Arduino and BFC. This gasket is made from the gasket material EPDM. The outer diameter of the gasket is 16mm, the inner diameter is 10mm and the height is 8mm. The sight glass does have a edge on it. The gasket has...
Astoria/Wega water level nut 1/2" 12mm
(0) This page shows the water level nut for a Astoria and Wega sight glass. This nut makes sure that the sight glass stays in place and seals properly. If the nut is screwed down the sight glass seal will slightly compress and seal off the sight glass. The part number for this item is for Astoria is 25383 and for Wega WY25383 This sight glass nut...
Brass half nut 3/8" 6mm hex 24
(0) This brass nut has a female thread of 3/8” bsp and a height of 6mm. The outer size is 21 or 24mm, this can vary sometimes and can’t be selected. So where is this brass hex nut used in espresso machines? You can find this model hex nut mainly on water and steam taps of brands like, Royal, La Spaziale, La Scala, Nuova Simonelli, Victoria...
Male plug 1/4"
(0) One of the most universal items. The male brass plug. The plus on this page can be found in the catalogue of a variety of espresso machine manufacturers like Astoria, Faema, La Spaziale and Wega. This specific plug has a male ¼”BSP-G thread. The height of this plug is 13 mm and the wrench size for this plug is 17mm.
Grimac brass washer 18x11.3x4.5mm
(0) This brass washer is a OEM/Original Grimac spare part. This brasher is used on the water level tube. The part reference numbers for this item are 1300900066, GR296 and GR296. This washer has been made from brass. The outer diameter is 18mm the inner diameter is 11,3mm and the thickness is 4,5mm. This washer has been made in Italy. This brass...
Water level nut
(0) This sight glass fitting is used on a variety of espresso machine brands such as Vibiemme, La Scala, Brasilia and Gaggia. The Brasilia part reference is 00089.0.10.04 , the Gaggia reference is LV0505 and the Vibiemme (VBM) part references are RACCP227 and RACCP427. This sight glass fitting has a male 3/8” BSP-G thread. The central hole is...
