La Cimbali water level magnetic sensor

La Cimbali M29 push button 2 coffee short

The o ring on this page is used to seal off the inside of the sight glass with some models of Faema and La Cimbali. You will find them under the part reference of Faema with 4701030129 and with la Cimbali 915-117-000. This is basically just a o ring made from EPDM. The cord diameter of this o ring is 3,53mm and the internal diameter of this o ring is...

This magnetic level microswitch is used on various older la Cimbali espresso machines, which don´t use a level probe. The La Cimbali part references for this item are 464922002, 464-922-002 and 464-922-010. This level assembly comes with the microswitch, magnet, level float and the gasket. This magnetic level senso can be used on various models such as...

The use of brass as the base of a solenoid valve is the standard. But the company ODE now also manufactures the bases from the techno polymer PPS. This 2 way solenoid valve is a flange model. This flange is bolted against a other machined flat surface and is sealed with 2 o rings. 1 for the inlet and the other one for the outlet. The orifice which lets...

The solenoid valve on this product page is made by the company Lucifer (it does state parker, but that is the same company). This type of solenoid valve can be found on various espresso machine brands such as Astoria, Cimbali, Bezzera, San Remo and Casadio. The part reference numbers can be found in the extra info tab. This solenoid valve is a 2 way...

On this product page you will find a anti vacuum valve. This valve is made completely out of brass and can be easily disassembled. This type of anti vacuum valve is used with quite a lot of espresso machine brands. This valve has a male ¼”BSP-G thread. The o ring inside the valve is made from HNBR, but the o ring end stop is made from PTFE. As mentioned...

The relay on this product page is used with various coffee grinders and espresso machines. You can find this relay on a Rancilio coffee grinder and various La Cimbali espresso machines. This relay has been manufactured by the company Finder, the name of this relay is 60.63.8.230.0000. This relay runs on 230V at 50/60Hz. There are 3 exchange contacts at...

The nozzle/gigleur is used on a couple of Cimbali brewing groups. This nozzle is not located inside the brewing group, as you see with most gigleurs. But it is installed inside the tubing at the flowmeter or close to the brewing group. This item has multiple part numbers you will find those at the extra info tab. This gigleur has a outer diameter of 14mm...