€56.86 tax excl.
GDPR Compliance
Protecting your personal data
Shipping policy
Everything about shipping your order
Return policy
all the inns and outs about our return policy
The heating element on this product page is suitable for La San Marco espresso machines. This element is suitable for a 1 group machine. The La San Marco part reference for this element is 108245A
This element produces 1750W at 110V, there are 2 connecting poles. The heating element has a immersed length of 120mm. The flange used on this heating element is triangular and is 82x82mm. The element has been manufactured in Italy.
To seal off this heating element you need a flat gasket. This gasket has a outer diameter of 56mm a inner diameter of 47mm and a thickness of 3mm.
This heating element can be used on the 1 group La San Marco 85 Praticale
Data sheet
This does depend of which brand of espresso machine you have. Some espresso machine brands don’t use a heating element thermostat at all. Most thermostats are interchangeable with each other, but always make sure that you use a single phase or a 3 phase version, check out the thermostats we have on our website
Well first of all the heating element flange, seen those are in most cases not interchangeable with each other. seen a Cimbali heating element won’t fit a Nuova Simonelli heating element due to the flange model. A other important feature is the length of the heating element. When it is too long, it won’t fit. When the element is too short you will get uneven heat distribution in the boiler.
Well descaling a heating element is quite simple. A heating element can be placed inside a water tight tube. But the flange can not be submerged, the chance that water gets inside the heating element is possible. Which shorts out the element and makes it unuasable.
To descale a heating element you can use Puly caff Calcinet descaler, this need to be dissolved into hot water. First remove the loose lime scale. If it doesn’t remove all the limescale, repeat the procedure.
A heating element only comes with a gasket when this is specified. If this is not specified a heating element gasket isn’t supplied with the element.
