La Spaziale S1 Vivaldi - water valve
La Spaziale S1 Vivaldi - water valve
There are 6 products.The water outlet on the La Spaziale S1 Vivaldi is not a manual operated valve, such as with the steam valve, but a solenoid valve operated valve. So you need to push a button on the front panel to start and stop the process.
The 2 way valve itself can be fitted with a 110V or a 230V version, this does depend on which configuration it is. After the solenoid valve you have a 90 degree fitting. From this point you get the water outlet, this can’t be moved seen it doesn’t have a swivel joint. To prevent any debris from the boiler getting in the tea water there is a replaceable strainer installed in the last section of the water outlet.
Fitting brass 1/4" x 1/4" MM
(0) The item on this page is a double male fitting. The threads used on each side are ¼” BSP-G threads. They are straight and not conical. This type of fitting is used with various brands such as San Marco, Grimac, Astoria, Wega, La Spaziale, Nuova Simonelli, Pavoni, Victoria Arduino and Gaggia. The complete reference and model list can be...
La Spaziale valve axle
(0) On this page you will find a brass valve shaft. This brass valve shaft is made by La Spaziale. The La Spaziale part number for this part is 00232. The steam valve shaft has a threaded section, which screws into the valve body with no 00218. On the shaft there is also a recess for a o ring to seal off the shaft. And at the end of the round shaft they have...
Steam water valve joint o ring 12,1x2,7mm...
(0) The o ring on this page can be used on various steam and water valves used on San Remo espresso machines. The San Remo part reference number for this o ring is 10402082 This o ring has been made from EPDM. This o ring has a cord diameter of 2,7mm. the inner diameter is 12,1mm. This o ring has been made in Italy. You can use this o ring on the San...
Steam pipe spring 12x16,5mm
(0) The compression spring on this product page can be found with a variety of espresso machine brands. It is used for applications in the steam and water valve with brands such as Victoria Arduino, Nuova Simonelli, la Spazaiale, Elektra and San Remo. The Spaziale part reference is 07568, The San Remo reference is 10402043, For Carimali it is...
Parker 2 way solenoid valve 1/4" 1/4" DN...
(0) The solenoid valve on this product page is made by the company Parker. This solenoid valve is mainly used as a water inlet valve for filling the boiler for various espresso machine brands such as San Marco, Faema, Nuova Simonelli, Conti, Gaggia, Scala and La Spaziale. This solenoid valve is a 2 way solenoid valve. The in and outlet of this solenoid valve...
L Fitting brass 1/4" MM
(0) On this page you will find a ¼”L fitting. This part is a generic item and is in use with a variety of espresso machine manufacturers. As mentioned earlier this is a L-fitting. Both threads a male ¼”BSP-G. The item is casted from brass, machined and nickel plated afterwards. That’s why it has a greyish colour. This type L...
