Nuova Simonelli grinding burrs lock nut

The grinding blades on this page can be used on a variety of coffee grinders. The brands like Nuova Simonelli (15080002) and the Eureka (MAC74) The outer diameter of this burr is 74mm. The inner diameter of the burr measures 38mm and the thickness measures 9mm. To fix the burrs to the grinder there are 3 mounting holes. The grinding blade is a right...

This hopper is especially made for the Eureka and Nuova Simonelli Mythos coffee grinder. This hopper comes as a complete set. The hopper itself, the inner protection on the inside, the lid of the hopper and the shutter to close off the hopper at the bottom. This hopper is suitable for the Eureka Mythos with part number 4000.0000 and the Nuova Simonelli...

This type of switch is used on the timer version of the Victoria Arduino Mythos coffee grinder. This specific item is a OEM/original Victoria Arduino spare part.  The part reference number for this item is 15030095. You push with your portafilter against this switch, and the grinding process will start.

This burr holder is used on a couple of coffee grinder brands. Nuova Simonelli (15080009 ) and Eureka(2520.0005). On this part the bottom burr (15030057) is also attached with 3 screws. This is also the rotating burr, seen it is attached to the motor shaft. On which grinders can I use this burr holder? On the Nuova Simonelli MDL, Nuova Simonelli MDLCA and...

This microswitch is used on Nuova Simonelli and Victoria Arduino Mythos coffee grinders. This switch indicates if the coffee hopper is installed, otherwise the grinder won’t work. The part reference number for this item is 15030002.This microswitch is rated up to 10A at 250V

On this page you will find the main electronic device for the Nuova Simonelli Mythos, Eureka Mythos but also on the Victoria Arduino Mythos. This unit is the controller which distributes the power to the vital parts of the coffee grinder. This can only used with a 230V coffee grinder, not with the 110V models made from this specific model. The part...

The coffee collecting tray is a standard item with most coffee grinders. Also, with the Nuova Simonelli and Eureka Mythos.  This is a plastic coffee collecting tray which slides into the frame of the coffee grinder. It can be removed easily to clean the coffee collecting tray The part number for the Eureka Mythos is 4100.0009 and for the Nuova...

This item is a grinding burr holder, used on the Victoria Arduino and the Nuova Simonelli Mythos one. This item has Nuova Simonelli part reference number 15030097 and the Victoria Arduino part reference number 15030097. This grinding burr holder has been made in Italy