Ode solenoid plunger R450675/V

This 3 way valve body is made by the brand Parker. This specific model is called the 3019F1LVG7 and is a 3 way valve. The exhaust port on top of the valve body has a male 1/8” thread. The inlet of the valve has a diameter of 2,5mm and is sealed of with a FKM valve inside the plunger. This valve is rated up to 14 bar.

This solenoid valve is made by the brand Parker. The valve itself runs at 220/230V 50/60Hz, with 6W.  the valve has a length of 22mm a height of 30,5mm and a length of 32,5mm. This product is made in Italy. This coil can be used on parker solenoid valves used on Bezzera espresso machines and on GBG granita machines. Always make sure that the part numbers...

This solenoid valve coil is a used in a 110/120v setting. This model of solenoid valve has the part reference numbers BDV08110AW, BDV08110AY and RBDV08110AY and can be used on various Marzocco espresso machines.

This solenoid valve coil is one of the most coils used on a variety of Horeca machines. The ZB09 produces 9W with 220/240 at 50/60Hz. The coil has a width of 34mm a height of 33mm and a length of 43mm and has bene made in Italy. You can use this coil on a variety of machines, ranging from espresso machines, to ovens and ice makers. For the complete list...

This parker solenoid valve coil is the model ZB09, but this one is a 110/120V version. So make sure that you don’t install this on a 230V valve. The coil itself is a 9W version and is powered by 110/120V at 50/60hz. This coil has a width of 34mm a height of 33mm and a length of 43mm. This coil is made in Italy. It can be used with various applications...

This replacement ODE plunger is the R450886/V. This plunger is used in the series 21A to 21L with orifices smaller then 3.0mm.

This specific solenoid valve body is the model 3019F1GRG7. It has on the top a female drain which has a 1/8” BSP-G thread. The central hole, orifice, has a diameter of 1,5mm and is sealed of with a ruby seal. The coil itself is rated up to 14 bar pressure. The housing is made from stainless steel and is NSF rated. The temperature rating is from -40 degree...

This valve body is made by the company Parker and it is a 3 way valve, with the part number PM128IV.5. The drain side is a 1/8”bsp-g thread and has a conical shape.  The plunger inside the coil is rated up to 20bar. This plunger is sealed of with a FKM gasket. This gasket seals off the central hole, orifice, which has a diameter of 1,3mm. The entire body...