Rancilio heating element 3 group 6000W 230V
  • Rancilio heating element 3 group 6000W 230V

Rancilio heating element 3 group 6000W 230V


€62.50 tax excl.

Shipment after 4 - 8 working days

  GDPR Compliance

Protecting your personal data

  Shipping policy

Everything about shipping your order

  Return policy

all the inns and outs about our return policy

The heating element on this page is one which can be used on Rancilio espresso machines. The Rancilio part number used for this heating element is 33323600.

This heating element produces 6000W at 230V, this heating element is used for 3 group espresso machines. This heating element has 6 poles. The immersed length of this heating element is 400mm. In between the heating element tube there is a special tube for the safety thermostat.

The flange used on this heating element is 78x78mm. the distance between the bolt holes is 62mm.

The heating element gasket for this heating element is 63x48x2mm. these are available in PTFE or in a Fibre material.

On which Rancilio espresso machine can I use this heating element? Rancilio Classe 6, Rancilio Classe 8, Rancilio Classe 9 and the Rancilio Classe 10.


Data sheet

Submerged length
Classe 6
Classe 8
Classe 9
Classe 10
part number
Rancilio 33323600

This does depend of which brand of espresso machine you have. Some espresso machine brands don’t use a heating element thermostat at all. Most thermostats are interchangeable with each other, but always make sure that you use a single phase or a 3 phase version, check out the thermostats we have on our website

Well first of all the heating element flange, seen those are in most cases not interchangeable with each other. seen a Cimbali heating element won’t fit a Nuova Simonelli heating element due to the flange model. A other important feature is the length of the heating element. When it is too long, it won’t fit. When the element is too short you will get uneven heat distribution in the boiler.

Well descaling a heating element is quite simple. A heating element can be placed inside a water tight tube. But the flange can not be submerged, the chance that water gets inside the heating element is possible. Which shorts out the element and makes it unuasable.

To descale a heating element you can use Puly caff Calcinet descaler, this need to be dissolved into hot water. First remove the loose lime scale. If it doesn’t remove all the limescale, repeat the procedure.

A heating element only comes with a gasket when this is specified. If this is not specified a heating element gasket isn’t supplied with the element.

Comments (0)
No customer reviews for the moment.

8 other product