Filter by
San Remo
more... less
Type part
more... less
Type
Filter

Sanremo Amalfi Espresso Machine Parts

San Remo Amalfi Espresso Machine Parts

The San Remo Amalfi is one of the more basic yet reliable models produced by the espresso machine manufacturer San Remo. This espresso machine utilizes a heat exchanger (HX) system to deliver warm water to the brewing groups, ensuring consistent temperature control during the brewing process.

San Remo Amalfi Espresso Machine Parts - 1 and 2 Group Models
IMS single cup filter basket 7/9 gr IMS single cup filter basket 7/9 gr

IMS single cup filter basket 7/9 gr

The filterbasket on this page is one of the most commonly found filter basket models. This model is made by IMS Filtri in Italy. The basket is from the competition line and not the standard line. The single filterbasket on this page has the IMS product code B701TH26.5E This single filterbasket can hold ground coffee from 7 grams up to 9grams. The basket...
€27.31
Quick-view
Asco/Sirai pressure switch P303/T01 3 phase 20A Asco/Sirai pressure switch P303/T01 3 phase 20A

Asco pressure switch P303/T01 3 phase 20A

The P303T01 a more lightweight 3 phase pressure switch then the Asco P302/6 3 phase pressure switch. The difference is also that the P302/6 has a partially metal cover. And the P303T01 has a full plastic cover. This pressure switch has been used espresso machines like: Bianchi, Fiamma and Orchestrale.Nowadays these pressure switches are named Asco, in the...
€88.64
Quick-view
Steam and water valve spring bushing Valve shaft sleeve

Steam and water valve spring bushing

The steam valve bushing on this page is used in one of the most common steam and water valves used. This item can be used with brands such as Marzocco, La Carimali, San Remo, La Scala, Faema, La Pavoni and BFC. Against this brass bushing seats a valve shaft spring. This bushing pushes against 2 o rings which seal off the steam valve shaft. This bushing...
€1.26
Quick-view
Spring for steam and water valve 10,5x32mm Faema P4 spring for valve

Spring for steam and water valve 10,5x32mm

This steam and water valve compression spring is one of the most used compression springs. You will find them with a variety of espresso machine brands such as Faema, Pavoni, La Scala, Vibiemme, la Marzocco and San Remo. The part references can be found in the extra info tab. This stainless-steel compression spring has a outer diameter of 10,5mm and a...
€1.38
Quick-view
San Remo plastic drain tank original San Remo plastic drain tank original

San Remo plastic drain tank original

the item on this product page is a OEM/original San Remo drain tank, which is used in variety of espresso machine models. The San Remo part reference number for this item is 10022474. This drain tank has in total 6 smaller hose connections and one bigger one for connecting the drain hose. This item is made in Italy. You can find this drain tank on the San...
€20.31
Quick-view
Solenoid valve connector Solenoid valve connector

Solenoid valve connector

The product on this page is a solenoid valve connector, large F fitting. With this connector you can seal off and connect your wiring and solenoid valve to each other. These connectors can be used on all types of standard solenoid valve coils. Where the positive and negative are spaced apart approx. 17mm. This solenoid valve connector can be basically...
€3.47
Quick-view
Crushable copper washer 22x16.5x2.2mm Crushable copper washer 22x16.5x2.2mm

Crushable copper washer 22x16.5x2.2mm

The item on this product page is a crushable copper gasket. This gasket can be used with a variety of espresso machine brands and applications. You can use this gasket with brands such as Cimbali, Faema, Vibiemme and Pavoni. The part reference for this item is for Faema 4701135891, for Pavoni 362000/362007/362075, for Vibiemme GUARTACHGR. This round...
€2.09
Quick-view
Level probe 1/4 125mm Level probe 1/4 125mm

Level probe 1/4 125mm

The level probe on this page can be used on a variety of espresso machines. You can use this level probes on brands such as La Scala, Grimac, Faema, Astoria, La Pavoni, Wega and Rancilio. This level probe has been made from stainless steel. The insulator is made from PTFE. The fitting is a male ¼” BSP-G thread. The overall length of this probe is 125mm....
€13.27
Quick-view
Lucifer solenoid valve 3 way base mounting 115V 50/60Hz Lucifer solenoid valve 3 way base mounting 115V 50/60Hz

Lucifer solenoid valve 3 way base mounting 115V 50/60Hz

The item on this page is a 3 way solenoid valve made by the brand Lucifer. This item is slightly different, seen it’s not a standard 220/230V model. But it is a 110V model. This 3 way valve can be used on a variety of espresso machine brands such as Casadio, Brugnetti, San Marco, La Scala, Cimbali, Grimac, Faema, Astoria, Nuova Simonelli, La...
€102.29
Quick-view
Brooks Cafelat red silicone portafilter gasket 73x57x8mm Brooks Cafelat red silicone portafilter gasket 73x57x8mm

Cafelat red silicone portafilter gasket 73x57x8mm

This size of portafilter gasket is the most common portafilter gasket you will find. This size can be used on the e61 style of brewing groups. You can use them on brands such as Faema, San Remo, Vibiemme , ECM, La Pavoni, Wega, Rocket and so on. This gasket is made by the HongKong based company Cafelat. This gasket is made from food graded red silicone....
€4.88
Quick-view
IMS Shower screen 60mm E61 200NT with nanotec coating IMS Shower screen 60mm E61 200NT with nanotec coating

IMS Shower screen 60mm E61 200NT with nanotec coating

The item on this product page is a precision/competition shower screen made by the Italian company IMS Filtri. This shower screen is called the E61200NT or the E61200TC. This specific model of shower screen is based on the shower screen used on e61 style brewing groups. But this shower screen is not the standard precision screen. It has been coated with...
€30.34
Quick-view
San Remo heating element 2700W 230/380V 1 1/4" San Remo heating element 2700W 230/380V 1 1/4"

San Remo heating element 2700W 230/380V 1 1/4"

The heating element on this page is suitable for a 2 group San Remo espresso machine. The San Remo part reference for this item is 10455052  The heating element produces 2700W with 230/380V, there are 6 connecting poles. This element has a immersed length of 325mm. The element has a screw in flange which has a diameter of 1”1/4. In the middle...
€115.34
Quick-view
San Remo 1/8 - 3/8" extension 61mm San Remo 1/8 - 3/8" extension 61mm

San Remo 1/8 - 3/8" extension 61mm

The item on this product page is only used in some San Remo brewing groups. This item is a brewing group extension fitting. This product is a OEM/Original San Remo part. The part reference number for this item is 14852032A This extension has been made from chrome plated brass. The hole is 6mm. The group side is a 1/8” male fitting, the inlet side is a...
€32.67
Quick-view
L Fitting brass 3/8" MM L Fitting brass 3/8" MM

L Fitting brass 3/8" MM

On this product page you will find a 3/8” L fitting. This is a generic item which can be used on a variety of espresso machines and own build projects. This L fitting a both Male 3/8”BSP-G fitting. The displayed item has a nickel finish, it is possible that you get a only brass version
€7.77
Quick-view
Steam water valve shaft gasket holder Faema P4/No stop steam valve rod

Steam water valve shaft gasket holder

The item on this product page is a steam and water valve shaft, including gasket holder. This item can be used on various espresso machine brands such as Marzocco, San Remo, Vibiemme, La Scala, Faema, La Pavoni. The part reference numbers can be found in the extra info tab. This steam and water valve shaft has been made from low lead content brass. On...
€9.71
Quick-view
RPM clamp ring motor 150W 230V 50/60Hz RPM clamp ring motor 150W 230V 50/60Hz

RPM clamp ring motor 150W 230V 50/60Hz

This item is one of the smaller models espresso machine motors made by the Italian electric motor manufacturer. The model code of this motor is C010709. This specific model is used on San Remo espresso machines. The power output of this motor is 150W at 230V with 50/60Hz. To start this motor you need a 6 µf motor capacitor. This motor includes the...
€180.47
Quick-view
San Remo heating element 4500W 230V San Remo heating element 4500W 230V

San Remo heating element 4500W 230V

The heating element on this page is suitable for various San Remo espresso machine boilers. This model is suitable for 2 group coffee machines. The San Remo part reference for this element is 10455080  This heating element produces 4500W at 230V. The element has 6 connecting poles and in the middle of these poles is a spare tube for a heating...
€156.78
Quick-view
Parker 3 way solenoid 110V 50/60Hz conical Parker 3 way solenoid 110V 50/60Hz conical

Parker 3 way solenoid 110V 50/60Hz conical

On this page you will find one of the most used brewing group solenoid valves in espresso machines. But this is instead of a 230V version a 115V version. This solenoid valve has been manufactured by the company Parker. The Parker parts reference for this solenoid valve is 393106J or 393111J This 3-way solenoid valve is a model with a flat flange, this...
€115.90
Quick-view
San Remo double portafilter original San Remo double portafilter original

San Remo double portafilter original

The portafilter on this product page is a OEM/original San Remo spare part. This specific model is a 2 coffee portafilter. The San Remo part reference number for this item is 10402312B. This portafilter is one suitable for 2 coffee. The spout used is a open model for easy cleaning.  The thickness of the ears is 6mm and they have a 90 degree orientation....
€116.01
Quick-view
RPM pump motor 165W 230V 50/60Hz RPM pump motor 165W 230V 50/60Hz

RPM pump motor 165W 230V 50/60Hz

This espresso machine motor is made by the Italian company RPM (model number 11002728). The motor itself has 165W with 230V 50/60hz. To power the motor up it has a capacitor of 10 µf. This is one of the more standardized espresso machine motors and is being used by a variety of coffee machine manufacturers. This ranges from brands like Astoria, Brasilia,...
€197.30
Quick-view
San Remo heating element 5100W 380V San Remo heating element 5100W 380V

San Remo heating element 5100W 380V

The heating element on this page is suitable for various San Remo espresso machine boilers. This model is suitable for 3 group coffee machines. The San Marco part reference for this element is 10455054  This heating element produces 5100W at 380W. The element has 6 connecting poles and in the middle of these poles is a spare tube for a heating...
€176.40
Quick-view

Models Available in the San Remo Amalfi Series

  • 1-Group San Remo Amalfi
  • 2-Group San Remo Amalfi

Volumetric Control System

The San Remo Amalfi is exclusively available in a volumetric version, meaning it comes equipped with a touch panel that allows for pre-set dosing. This system makes it easy for baristas to achieve consistent shot volumes without manually controlling the brewing process. Unlike other machines that offer manual control options, the Amalfi only provides volumetric dosing, making it simple and efficient to operate.

Configuration and Voltage Options

This espresso machine is available in 1-group and 2-group configurations:

  • The 1-group version is versatile and available in both 120V and 230V versions, making it suitable for smaller establishments or domestic settings.
  • The 2-group model is built for higher capacity use and is only available in the 230V/380V configuration, making it ideal for larger commercial setups.

San Remo Amalfi Spare Parts from Brooks

At Brooks Parts, we provide a wide range of spare parts for the San Remo Amalfi, including components for the heat exchanger, touch panels, and volumetric dosing systems. Whether you're looking for OEM or aftermarket parts, we can assist you in finding the right parts to keep your Amalfi running at peak performance.

If you are unsure about which parts are compatible with your San Remo Amalfi, feel free to contact us for assistance.