San Remo heating element 5100W 380V
search
  • San Remo heating element 5100W 380V

San Remo heating element 5100W 380V


€116.22

€116.22 tax excl.

qty
Shipment after 4 - 8 working days

  GDPR Compliance

Protecting your personal data

  Shipping policy

Everything about shipping your order

  Return policy

all the inns and outs about our return policy

The heating element on this page is suitable for various San Remo espresso machine boilers. This model is suitable for 3 group coffee machines. The San Marco part reference for this element is 10455054 

This heating element produces 5100W at 380W. The element has 6 connecting poles and in the middle of these poles is a spare tube for a heating element thermostat. This element has a immersed length of 460mm. This element is a screw in model, the flange has a connection of 1”1/4.

The gasket used on this element has a outer diameter of 57mm a inner diameter of 42-43mm and a thickness of 3mm.

You can use this heating element on the San Remo models such as the San Remo Milano LX, San Remo Pisa, San Remo Torino, San Remo Venezia, San Remo Verona and the San Remo Zoe.

San Remo
13-043-L-1455066

Data sheet

Brand
San Remo
part number
San Remo 10455054
San Remo
Milano LX
Pisa
Torino
Venezia
Verona
Zoe
Submerged length
460mm
Type part
Heating element
Voltage
380V
Watt
5100W

This does depend of which brand of espresso machine you have. Some espresso machine brands don’t use a heating element thermostat at all. Most thermostats are interchangeable with each other, but always make sure that you use a single phase or a 3 phase version, check out the thermostats we have on our website

Well first of all the heating element flange, seen those are in most cases not interchangeable with each other. seen a Cimbali heating element won’t fit a Nuova Simonelli heating element due to the flange model. A other important feature is the length of the heating element. When it is too long, it won’t fit. When the element is too short you will get uneven heat distribution in the boiler.

Well descaling a heating element is quite simple. A heating element can be placed inside a water tight tube. But the flange can not be submerged, the chance that water gets inside the heating element is possible. Which shorts out the element and makes it unuasable.

To descale a heating element you can use Puly caff Calcinet descaler, this need to be dissolved into hot water. First remove the loose lime scale. If it doesn’t remove all the limescale, repeat the procedure.

A heating element only comes with a gasket when this is specified. If this is not specified a heating element gasket isn’t supplied with the element.

Comments (0)
No customer reviews for the moment.

8 other product