0
My cart
Sanremo Milano LX Espresso Machine Parts
Wera shower screen screwdriver slotted
In some cases, the shower screen is attached with a screw, in most cases that is a Philips or a slotted screw. It is difficult to remove it with a regular screwdriver due to the limited height under the brew group.
But for that you need a shortened slotted screwdriver, in this case the one from the German brand Wera, which fits well under the brewing...
€13.54
IMS single cup filter basket 7/9 gr
The filterbasket on this page is one of the most commonly found filter basket models. This model is made by IMS Filtri in Italy. The basket is from the competition line and not the standard line. The single filterbasket on this page has the IMS product code B701TH26.5E
This single filterbasket can hold ground coffee from 7 grams up to 9grams. The basket...
€27.31
Asco pressure switch P303/T01 3 phase 20A
The P303T01 a more lightweight 3 phase pressure switch then the Asco P302/6 3 phase pressure switch. The difference is also that the P302/6 has a partially metal cover. And the P303T01 has a full plastic cover.
This pressure switch has been used espresso machines like: Bianchi, Fiamma and Orchestrale.Nowadays these pressure switches are named Asco, in the...
€88.64
Steam and water valve spring bushing
The steam valve bushing on this page is used in one of the most common steam and water valves used. This item can be used with brands such as Marzocco, La Carimali, San Remo, La Scala, Faema, La Pavoni and BFC.
Against this brass bushing seats a valve shaft spring. This bushing pushes against 2 o rings which seal off the steam valve shaft.
This bushing...
€1.26
Spring for steam and water valve 10,5x32mm
This steam and water valve compression spring is one of the most used compression springs. You will find them with a variety of espresso machine brands such as Faema, Pavoni, La Scala, Vibiemme, la Marzocco and San Remo. The part references can be found in the extra info tab.
This stainless-steel compression spring has a outer diameter of 10,5mm and a...
€1.38
Solenoid valve connector
The product on this page is a solenoid valve connector, large F fitting. With this connector you can seal off and connect your wiring and solenoid valve to each other.
These connectors can be used on all types of standard solenoid valve coils. Where the positive and negative are spaced apart approx. 17mm.
This solenoid valve connector can be basically...
€3.47
Gasket AFM 34 22x16x2mm
The most common location for this to seal off the 3/8” male nut on the top of the Faema E61 and E61 style brewing groups like with Bezzera, Brasilia, Grimac, La Scala, Vibiemme and Wega.But also as a gasket to seal off boiler components with brands like Vibiemme and Grimac,
This gasket has been made from the material AFM 34 made by the german company...
€1.36
Crushable copper washer 22x16.5x2.2mm
The item on this product page is a crushable copper gasket. This gasket can be used with a variety of espresso machine brands and applications. You can use this gasket with brands such as Cimbali, Faema, Vibiemme and Pavoni. The part reference for this item is for Faema 4701135891, for Pavoni 362000/362007/362075, for Vibiemme GUARTACHGR.
This round...
€2.09
Level probe 1/4 125mm
The level probe on this page can be used on a variety of espresso machines. You can use this level probes on brands such as La Scala, Grimac, Faema, Astoria, La Pavoni, Wega and Rancilio.
This level probe has been made from stainless steel. The insulator is made from PTFE. The fitting is a male ¼” BSP-G thread. The overall length of this probe is 125mm....
€13.27
Lucifer solenoid valve 3 way base mounting 115V 50/60Hz
The item on this page is a 3 way solenoid valve made by the brand Lucifer. This item is slightly different, seen it’s not a standard 220/230V model. But it is a 110V model.
This 3 way valve can be used on a variety of espresso machine brands such as Casadio, Brugnetti, San Marco, La Scala, Cimbali, Grimac, Faema, Astoria, Nuova Simonelli, La...
€102.29
Cafelat red silicone portafilter gasket 73x57x8mm
This size of portafilter gasket is the most common portafilter gasket you will find. This size can be used on the e61 style of brewing groups. You can use them on brands such as Faema, San Remo, Vibiemme , ECM, La Pavoni, Wega, Rocket and so on. This gasket is made by the HongKong based company Cafelat.
This gasket is made from food graded red silicone....
€4.88
IMS Shower screen 60mm E61 200NT with nanotec coating
The item on this product page is a precision/competition shower screen made by the Italian company IMS Filtri. This shower screen is called the E61200NT or the E61200TC.
This specific model of shower screen is based on the shower screen used on e61 style brewing groups. But this shower screen is not the standard precision screen. It has been coated with...
€30.34
San Remo heating element 2700W 230/380V 1 1/4"
The heating element on this page is suitable for a 2 group San Remo espresso machine. The San Remo part reference for this item is 10455052
The heating element produces 2700W with 230/380V, there are 6 connecting poles. This element has a immersed length of 325mm. The element has a screw in flange which has a diameter of 1”1/4. In the middle...
€115.34
L Fitting brass 3/8" MM
On this product page you will find a 3/8” L fitting. This is a generic item which can be used on a variety of espresso machines and own build projects.
This L fitting a both Male 3/8”BSP-G fitting.
The displayed item has a nickel finish, it is possible that you get a only brass version
€7.77
Flex pipe 450mm 1/4" ff conical base
On this page you will find a stainless steel water hose. This hose can be used to connect the water mains to your espresso machine any other suitable appliance. Or in the case of a San Remo espresso machine it can be used to connect the outlet of the pump to the water inlet valve.
This stainless steel flex hose has a overall length of 450mm and on each...
€26.34
Steam water valve shaft gasket holder
The item on this product page is a steam and water valve shaft, including gasket holder. This item can be used on various espresso machine brands such as Marzocco, San Remo, Vibiemme, La Scala, Faema, La Pavoni. The part reference numbers can be found in the extra info tab.
This steam and water valve shaft has been made from low lead content brass. On...
€9.71
RPM clamp ring motor 150W 230V 50/60Hz
This item is one of the smaller models espresso machine motors made by the Italian electric motor manufacturer. The model code of this motor is C010709. This specific model is used on San Remo espresso machines.
The power output of this motor is 150W at 230V with 50/60Hz. To start this motor you need a 6 µf motor capacitor. This motor includes the...
€180.47
San Remo heating element 4500W 230V
The heating element on this page is suitable for various San Remo espresso machine boilers. This model is suitable for 2 group coffee machines. The San Remo part reference for this element is 10455080
This heating element produces 4500W at 230V. The element has 6 connecting poles and in the middle of these poles is a spare tube for a heating...
€156.78
Parker 3 way solenoid 110V 50/60Hz conical
On this page you will find one of the most used brewing group solenoid valves in espresso machines. But this is instead of a 230V version a 115V version. This solenoid valve has been manufactured by the company Parker. The Parker parts reference for this solenoid valve is 393106J or 393111J
This 3-way solenoid valve is a model with a flat flange, this...
€115.90
San Remo double portafilter original
The portafilter on this product page is a OEM/original San Remo spare part. This specific model is a 2 coffee portafilter. The San Remo part reference number for this item is 10402312B.
This portafilter is one suitable for 2 coffee. The spout used is a open model for easy cleaning. The thickness of the ears is 6mm and they have a 90 degree orientation....
€116.01
Group and Voltage Configurations
The San Remo Milano LX comes in 1, 2, and 3 group versions, making it adaptable to various needs. For smaller establishments, the 1-group version provides sufficient capacity, while the 3-group version, with its 5100W power, is capable of meeting the demands of larger venues, such as busy restaurants and cafes.
E61 Style Brewing Groups
This espresso machine is equipped with E61 Style brewing groups, which are all operated via solenoid valves. This setup is known for its reliability and durability, ensuring consistent espresso extraction. The brewing group design contributes to the machine's ability to handle high volumes efficiently.
SAP and SED Versions
The San Remo Milano LX is available in two versions:
- SAP Version: This model is fitted with a basic push button for starting and stopping the brewing process, ideal for those who prefer simplicity.
- SED Version: This version offers a push-button panel that allows users to select from a variety of coffee options, making it more user-friendly and convenient for a wider range of drinks.
Steam and Water Valves
On either side of the espresso machine, the San Remo Milano LX is equipped with manual steam valves, which are easy to operate and provide full control over steam output. In the middle of the machine, you'll find a solenoid-operated water valve, which is activated with the push of a button, allowing for quick and easy dispensing of hot water.
San Remo Milano LX Spare Parts from Brooks
At Brooks Parts, we offer a wide selection of spare parts for the San Remo Milano LX, including components for the E61 Style brewing groups, solenoid valves, and steam valves. Whether you are looking for OEM or aftermarket parts, we can help you find what you need to keep your machine running smoothly.
If you need assistance selecting the right parts or have any questions about your San Remo Milano LX espresso machine, feel free to contact us.