Slotted stainless steel screw M5x20mm

The item on this product page is a compression spring used in various espresso machine models of the La Cimbali group. This spring can be found with the brands Casadio, Cimbali and Faema. The Casadio part reference is 958075010, the Cimbali part references are 958075010 and 958-075-010. For Faema the reference is 958075010. This stainless-steel...

The contactor shown on this page is used with various espresso machines and coffee grinders. You will find this contactor on various Nuova Simonelli, Victoria Arduino and Compak models. The Compak reference is K..209, the Nuova Simonelli and Victoria Arduino reference are 04200019. This contactor has been made by the Italian company Lovato. This model is...

Pavoni Botticelli/Giotto Thermo PID 230V

With Faema and La Cimbali flange pumps there is a additional coupling between the flanged motor and the flanged pump. This coupling is made of 2 metal couplings. 1 connects to the espresso machine motor shaft, the other connects to the pump. Note: this coupling has a round shaft opening with a flat side. The metal connectors have a OD of 40mm. In between...

The o ring shown on this page is used on various La San Marco espresso machine brewing groups. The part reference for this item is 109045. This group gasket o ring has a thickness of 5,9mm a inner diameter of 76,6mm. the gasket has been made in Italy You can use this gasket / o-ring on the lever operated brewing groups and the older model of manual...

A plug is a generic item which can be used in a variety of espresso machines. This specific version of the female plus is one which has a ¼”BSP-G thread.  You can use this type of fitting to seal off a variety of parts of your espresso machine, hydraulic system, brewing group valves and boiler This part is used in brands like Astoria...

The capacitor on this product page is made by the Italian brand Ducati Energia. This specific model is a 22 µF model, which can run up to 450V 50/60Hz. The operating temperature is from -25 Degree C up to 85 degree C. The connectors have a width of 6,35mm and a thickness of 0,8mm. This capacitor has a M8 thread on the end. The outer diameter is 40mm and...

On this page you wild find a IPC clamp ring motor(model YDK94/50-4-150B8), suitable for the use with espresso machine pumps. This motor has a wattage of 150W with 220/240V 50/60Hz. To start the motor it uses a 6 µf capacitor. This model is a clamp ring motor, so the pump will be attached to the clamp ring of the espresso machine motor with a...