Spaziale S8/S9 push button

On this page you will find a boiler safety valve 3/8” male with a present of 1,8 bar. This safety valve is, at own responsibility, adjustable. This can be done by tightening or untightening the Allan key slot in the top of the valve. Inside this safety valve has a stainless steel spring inside, the sealing material is FKM. This is a non certified...

The sight glass gasket on this page is a OEM/Original La Spaziale spare part. This item has the La Spaziale part reference of 00265. This sight glass gasket has been made from red silicone. The outer diameters are 17 and 14mm. The internal diameter is 11mm. The height of the gasket is 9 and 4mm. This gasket has been made in Italy. You can find this red...

Every steam and water valve needs to have some sort of a axle. In most cases a threaded axle, in some cases a smooth axle. In this case one with a thread. This specific model of steam valve axle is used in a variety of La Spaziale espresso machine models. La Spaziale uses a variety of steam and water valve shafts for their valves. This specific model can...

Every brewing group uses a shower screen. Some shower screens are held in place with the portafilter, some do use a flat head or Philips head screw or a hex bolt. In the case of La Spaziale you will typically find the stainless steel hex head screws with the dimensions of M5x25 (La Spaziale code 0643) This handy T shaped tool can be used to unscrew the...

It is quite common on espresso machines that the shower screen in the brewing group is attached with a screw. The issue is that the space between the brewing group and the drip tray is quite often too little for a normal screwdriver. For that reason we have the Wera short version screwdrivers. This specific model is suitable to use in combination with a...

The vibration manufacturer Ulka makes 230V vibration pumps for espresso machines. But they also make 120V vibration pumps for espresso machines. On this page you will find the Ulka EX5 vibration pump. This pump produces 41W with a 120V at 60Hz. The water inlet is a 6mm plastic fitting, the outlet of the pump is 1/8”BSP. The EX5 has a brass outlet...

The bipolar switch on this page can be found in various espresso machine brands such as Elektra and Gaggia. The Elektra part reference is 01221035 and the Gaggia part reference is 5024008000. This bipolar switch is rated up to 16A at 250V. This switch has been made in Italy. You can find this switch on the Elektra Miniverticale, Gaggia XE and the...

On this page you will find the Push button board for the La Spaziale S3 E.K. with La Spaziale part number 06001. This specific push button board is solely usable for the 5 button version. This article doesn’t come with the dosing membrane( 05498 ) If you are not entirely sure which touch button board is suitable for your La Spaziale espresso machine,...