Zanussi professional fryer models
Zanussi has produced professional fryers in compact, countertop and full modular cooking-line configurations.
Older spare-part compatibility includes numerous machine families such as:
- RF and RFR
- XF and XFR
- JF and JFR
- MF and MFR
- PF and PFR
- OF and OFR
- TF and TFR
- KFR and KFH
- HFR and HFH
- QFR and QFH
- ZFR and ZFH
- WFR and WFH
- AFR and AFH
Current and recent Zanussi Professional modular equipment also includes EVO700 and EVO900 fryer families, with different electric and gas configurations, tank capacities and heating systems.
Model codes are technically important. A designation such as Z7FREH2E00, HFR/E430 or AFRG16 provides much more useful information than simply identifying the machine as a Zanussi fryer.
Parts for Zanussi electric and gas fryers
Electric and gas fryers use different methods to heat the oil, but both rely on accurate temperature regulation and effective safety systems.
Electric fryers use heating elements controlled by thermostats, switches, contactors and safety limiters. Gas fryers require burner-control components, thermocouples, flame-safety systems and gas regulation.
Typical Zanussi fryer spare parts include:
- Heating elements
- Operating thermostats
- Safety thermostats
- Fryer baskets
- False bottom meshes
- Basket handles
- Thermocouples
- Gas-control components
- Indicator lights
- Switches and microswitches
- Electrical control components
- Drain components
- Tank and mechanical fittings
Heating elements for Zanussi fryers
The heating element is one of the principal service components in an electric fryer. It converts electrical power into heat and must repeatedly recover oil temperature when cold food is introduced.
A deteriorated element can result in slow warm-up, poor recovery, uneven frying or complete loss of heating.
Zanussi has used different element sizes, voltages, wattages and mechanical layouts across its fryer generations. Electrical specifications alone should therefore never be used to determine compatibility.
Zanussi 005964 fryer heating element
Brooks Parts supplies a compatible heating element corresponding to Zanussi reference 005964.
The element is rated at 2900 W at 230 V and measures approximately 305 mm long, 60 mm wide and 200 mm high, with a 65 x 31.5 mm flange.
Its extensive fryer compatibility includes earlier models such as:
- BF/E1S12
- RF/E1S12 and RF/E2D12
- RFR/E1S12 and RFR/E2D12
- XF and XFR variants
- JF variants
- MF and MFR variants
- PF variants
- OF variants
- TF variants
The same component reference is also associated with more recent 700-series fryer configurations including E7-, Z7- and A7-coded machines.
This is a good example of why an OEM reference can be more useful than searching only by fryer series.
Zanussi EVO700 fryer parts
The Zanussi EVO700 family includes professional electric and gas fryers designed for modular 700 mm cooking lines.
Electric EVO700 fryers can use internal tilting Incoloy heating elements. Depending on the configuration, equipment is available with one or two wells and different oil capacities.
Examples include Z7FRED and Z7FREH model structures. Gas versions use Z7FRG model codes and external burner systems on relevant machines.
EVO700 fryers also use operating thermostats, overheat protection, oil-drain components, baskets and electrical controls.
Because single-well, double-well, countertop and freestanding versions differ, use the complete Z7 model code rather than selecting a part based only on the EVO700 name.
Zanussi EVO900 fryer parts
The Zanussi EVO900 range is intended for larger professional cooking installations and higher production requirements.
Electric EVO900 machines include configurations with 15-litre wells and models with external high-efficiency heating systems. Other machines use different capacities and technical layouts.
Examples include Z9FRED and related Z9 fryer codes.
A component for an EVO700 fryer should not automatically be assumed to fit EVO900 simply because both machines use similar controls or operate over a similar temperature range.
Thermostats for Zanussi fryers
The operating thermostat regulates normal frying temperature by switching or controlling the heating system.
Brooks Parts supplies a compatible EGO 55.19639.800 thermostat with a regulation range of approximately 90 to 185°C.
This thermostat has broad compatibility with Zanussi electric fryer families including MFR, RFR, RF, XF, JF, MF, PF, OF, TF, KFR, HFR, QFR, ZFR, WFR and AFR machines.
Applications also include selected gas fryer families.
Because one thermostat can be used across many models, the component number, capillary configuration, switching function and model application should all be checked.
Zanussi fryer safety thermostats
The safety thermostat performs a different role from the normal operating thermostat. It protects the fryer when the temperature rises beyond an acceptable operating condition.
Brooks Parts supplies the compatible EGO 55.31549.020 safety thermostat with a fixed cut-out temperature of 245°C and manual reset.
Its Zanussi gas-fryer applications include several RFR, XFR, JFR, MFR, PFR, TFR, HFR and ZFR models as well as selected later E7 and Z7 configurations.
An operating thermostat and a manual-reset high-limit thermostat should never be treated as interchangeable merely because both use a capillary and bulb.
How to identify a Zanussi fryer thermostat
Check:
- Original Zanussi or component reference
- Operating or safety function
- Temperature range or cut-out temperature
- Manual or automatic reset
- Capillary length
- Bulb diameter and length
- Electrical contact configuration
- Switching capacity
- Exact fryer model
Zanussi fryer baskets
Professional fryer baskets are repeatedly exposed to hot oil, food weight, mechanical impact and intensive cleaning.
Over time the mesh can deform, welds can weaken or the handle can become damaged.
Brooks Parts carries several replacement basket formats for Zanussi fryers. These should be identified from dimensions, handle design and original reference rather than simply selecting a basket that appears to fit the tank.
Zanussi 006133 fryer basket
A compatible basket corresponding to Zanussi reference 006133 measures approximately 330 x 140 x 140 mm.
This basket has broad application across electric and gas fryer models including KFR, KFH, HFR, ZFR, WFR and AFR families as well as selected later fryer configurations.
Its compatibility across multiple machine generations means the OEM number is particularly useful when replacing an existing basket.
Zanussi 052290 fryer basket
Another compatible fryer basket corresponds to Zanussi reference 052290 and measures approximately 340 x 160 x 150 mm.
Applications include machines such as:
- HFR/E420
- HFR/E840
- HFR/E421
- HFR/G420
- HFR/G840
- HFR/G421
Some basket formats can also appear in other cooking equipment applications, making the original reference and appliance type important identification checks.
False bottom meshes for Zanussi fryers
A false bottom mesh sits in the fryer well and helps prevent food debris from falling directly into critical areas around the heating system.
It can also help separate residues from the main frying zone and protect the lower section of the well.
Brooks Parts supplies a compatible 390 x 295 mm false bottom mesh corresponding to Zanussi reference 006130.
This component has extensive compatibility with electric and gas fryer families including KFR, HFR, QFR, ZFR, WFR and AFR machines as well as selected E9 fryer configurations.
Check width, depth, support arrangement and original reference before replacement.
Zanussi gas fryer parts
Gas fryers depend on correct ignition, gas flow and flame-safety operation.
Depending on the fryer generation, components can include:
- Thermocouples
- Gas valves
- Pilot components
- Burners
- Ignition parts
- Operating thermostats
- Safety thermostats
- Gas pipes and fittings
Gas type, pressure and component specification must correspond to the machine. Gas-system repairs and adjustment should be carried out by appropriately qualified personnel.
Zanussi OEM 0CA280 thermocouple
Brooks Parts supplies the original Zanussi OEM 0CA280 thermocouple.
It has an M9x1 connection, a length of approximately 600 mm and an interrupted contact with connecting leads.
Fryer compatibility includes AFRG16 and AFRG16W gas fryers.
Because the component is also used in other Zanussi gas cooking equipment, the exact machine model remains important even when the OEM number is known.
Indicator lights for Zanussi fryers
Indicator lights provide simple visual information about power, heating or another operating state.
Brooks Parts supplies a compatible orange 250 V indicator light used in a very broad range of Zanussi professional cooking equipment, including electric and gas fryers from the MFR, RFR, XFR, JFR, PFR, OFR, TFR, KFR, HFR, QFR, ZFR, WFR and AFR families.
When replacing an indicator lamp, compare voltage, colour, head diameter, mounting-hole size, terminal arrangement and original reference.
Switches and electrical control components
A fryer that does not heat is not necessarily suffering from a failed heating element.
Switches, microswitches, thermostats, relays, contactors and safety circuits all form part of the electrical control system.
Brooks Parts also supplies switches used on selected Zanussi fryer applications. When diagnosing an electrical fault, establish which component has failed before replacing the element or thermostat unnecessarily.
Legacy Zanussi fryer families
Many older Zanussi fryers remain in professional service, which makes legacy model identification particularly important for spare parts.
Model families such as RF, RFR, HFR, ZFR and AFR can appear in numerous widths, capacities and electric or gas configurations.
Examples such as HFR/E430, HFR/G430, HFR/E830 and HFR/G830 indicate differences in energy source and fryer configuration that directly affect parts compatibility.
Do not shorten the model code when searching for an electrical, heating or gas component.
Zanussi and Electrolux Professional parts
Zanussi Professional operates within the Electrolux Professional equipment ecosystem, and some component platforms or model structures can have closely related Electrolux, Zanussi and other group-brand applications.
This does not mean that every Electrolux part automatically fits a Zanussi fryer.
Use the specific OEM reference and exact machine model rather than assuming compatibility based on corporate group or visual similarity.
Common Zanussi fryer problems
- Slow heating: inspect the element, electrical supply, controls and thermostat.
- No heating: check element, switch, contactor, thermostat and safety limiter.
- Oil overheats: inspect the operating thermostat and high-limit circuit.
- Gas burner will not remain lit: inspect thermocouple, flame-safety and gas-control components.
- Poor temperature recovery: check heating output and temperature regulation.
- Basket no longer fits correctly: verify dimensions, handle design and original reference.
- Food debris collects around heating components: inspect the false bottom mesh and tank configuration.
- Indicator light fails: verify lamp voltage and the underlying electrical circuit.
These symptoms can have several causes. Diagnose the machine before selecting a replacement component.
How to identify the correct Zanussi fryer part
Start with the data plate and existing component.
Record:
- Manufacturer: Zanussi Professional
- Full fryer model
- Electric or gas version
- Single- or double-well configuration
- Oil capacity
- Production code or product number where available
- Original Zanussi/OEM number
- Component manufacturer where relevant
- Voltage and wattage
- Thermostat temperature range
- Gas specification for gas components
- Mechanical dimensions and mounting
When the original Zanussi part number is available, use it as the leading identification reference.
Original and compatible Zanussi fryer parts
Brooks Parts supplies both original Zanussi spare parts and selected compatible replacements.
An original component is supplied under an original Zanussi reference. A compatible component is manufactured as an alternative for a specified Zanussi number or machine application.
For example, Brooks Parts supplies an original Zanussi 0CA280 thermocouple, while several baskets, false bottom meshes and heating components are available as compatible alternatives.
Always distinguish between manufacturer origin and machine compatibility.
Maintaining a Zanussi professional fryer
Regular maintenance helps preserve heat recovery, accurate temperature regulation and reliable operation.
Clean the fryer well according to the manufacturer's instructions and inspect baskets and false bottom meshes for deformation or damage.
On electric fryers, monitor heating performance and inspect electrical components during scheduled service. On gas fryers, flame-safety and gas-control components should be inspected by qualified personnel.
Always isolate electrical power before service. Gas appliances must also be safely isolated from the gas supply where work on the gas system is required.
More fryer and Zanussi spare parts
For other professional fryer manufacturers, browse our professional fryer parts category.
For ovens, cooking equipment, dishwashers, refrigeration and other Zanussi equipment, visit Zanussi Professional spare parts.
Zanussi fryer parts from Brooks Parts
Brooks Parts supplies Zanussi fryer parts for electric and gas professional fryers ranging from established RF, HFR, ZFR and AFR machines to more recent EVO700 and EVO900 equipment.
The range includes heating elements, operating and safety thermostats, fryer baskets, false bottom meshes, thermocouples, indicator lights and other service components.
Use the complete fryer model, original OEM reference and relevant electrical, mechanical or gas specifications to identify the correct part.
