Astoria heating element 3 group 3700W 220V
search
  • Astoria heating element 3 group 3700W 220V

Astoria heating element 3 group 3700W 220V


€69.29

€69.29 tax excl.

qty
Shipping after 4 - 8 working days

  GDPR Compliance

Protecting your personal data

  Shipping policy

Everything about shipping your order

  Return policy

all the inns and outs about our return policy

The heating element on this page is quite a big model, which goes over 500mm. This specific heating element is made for Astoria and Wega espresso machine models with 3 brewing groups. This heating element is listed with Astoria under 17101 and with Wega the part number is WY17101 

This heating element produces 3700W at 230/240V. The heating element has 4 connecting leads, nuts and washers. The immersed length of the element is 500mm. The flange has a width of 95x57mm. the gasket for this heating element has a outer diameter of 57mm a inner diameter of 43mm and a thickness of 3mm.

You can find this type of element in the Astoria Argenta, Astoria Brava, Astoria Denise, Astoria Dora, Astoria Lisa, Astoria Pratic, Astoria Rapallo and the astoria Vania.



Astoria
13-092-L-1755068

Data sheet

Astoria CMA
Argenta
Brava
Compact
Denise
Dora
Gloria
Lisa
Pratic
Pratic new
Rapallo
Rapallo AL
Vania
Brand
Astoria
Wega
part number
Astoria 17101
Wega WY17101
Submerged length
500mm
Type part
Heating element
Voltage
230/240V
Watt
3700W

This does depend of which brand of espresso machine you have. Some espresso machine brands don’t use a heating element thermostat at all. Most thermostats are interchangeable with each other, but always make sure that you use a single phase or a 3 phase version, check out the thermostats we have on our website

Well first of all the heating element flange, seen those are in most cases not interchangeable with each other. seen a Cimbali heating element won’t fit a Nuova Simonelli heating element due to the flange model. A other important feature is the length of the heating element. When it is too long, it won’t fit. When the element is too short you will get uneven heat distribution in the boiler.

Well descaling a heating element is quite simple. A heating element can be placed inside a water tight tube. But the flange can not be submerged, the chance that water gets inside the heating element is possible. Which shorts out the element and makes it unuasable.

To descale a heating element you can use Puly caff Calcinet descaler, this need to be dissolved into hot water. First remove the loose lime scale. If it doesn’t remove all the limescale, repeat the procedure.

A heating element only comes with a gasket when this is specified. If this is not specified a heating element gasket isn’t supplied with the element.

Comments (0)
No customer reviews for the moment.

8 other product