Bezzera Galatea Domus Spare Parts
This gasket is again such a standard type of gasket in the world of espresso coffee machines. It is the EPDM gasket 15.5x7.5x4mm. This gasket is used a variety of applications on espresso machines. Offcourse on the Faema E61 brewing group as well for the E61 style brewing group, as the camme shaft gasket. By brands like Isomac, Bezzera, ECM, Brasilia,...
€0.74
Filterholder gasket 72.5x57x8 mm
The portafilter gasket on this product page can be used with a wide selection of brands. This portafilter gasket can be used on Brasilia, San Remo, la Scala, Bezzera, Faema, Vibiemme and Pavoni espresso machines.
This gasket has been made from NBR. The outer diameter is 72,5mm, the inner diameter is 57mm and the thickness is 8mm. This gasket has been made...
€3.67
E61 style groups shower without welding 60mm
The function of a shower screen is to spread the water coming out off the group on a equal way over the coffee. One of the standardized sizes and most common, is the 60mm shower screen. This shower is a pressed model made by IMS IMSDR300. The outer diameter is 60mm, the internal height is 17mm and the diameter of the punctured holes is 2,5mm
Note: this is...
€3.02
Solenoid valve silicone o ring 6,07x1,78mm
This o ring is one of the most common parts in the world of espresso machines. The main function of this o ring is to seal off a flanged solenoid valve. Every flanged solenoid valve uses 2 of these. But you will also find them in applications like steam and water valves and water inlet taps.
The o ring has a wire diameter of 1,78mm and a internal diameter...
€0.66
PTFE gasket 35x30x2mm
The gasket on this page is a Polytetrafluoroethylene (PTFE) gasket with the dimensions 35x30x2mm. This specific gasket is used on 3 specific places on the E61 style brewing group (the Faema E61 and Faema E61 legend group use a different size of ptfe gasket). It is used to seal off the top trumpet or drain sleeve, on the side of the group the camme holder...
€1.47
Heating element gasket PTFE 42x33x3mm
On this page you will find a PTFE heating element gasket is suitable for a variety of brands such as ECM Heidelberg and Bezzera
This heating element gasket has a outer diameter of 42mm a inner diameter of 33mm and a thickness of 3mm. This size of gasket is suitable for a 1” screw in heating element.
€3.40
Ulka Vibration pump EX5 230V 50/60Hz with brass outlet
On this page you will find one of the most used espresso machine pumps. The Ulka Ex5 48W 230V espresso machine vibration pump. This pump produces 48W at 230V with 50Hz. The inlet connection is 6mm, suitable for a silicone hose. The pump outlet is a 1/8” Bsp, this side is made from brass. There is also a Identical pump the Ulka EP5, this one has a plastic...
€26.74
Stainless steel filter 8.6x22.5mm
The item on this product page is a stainless steel water filter, this filter is used with various espresso machine brands in the top of the brewing group. You can find this filter with brands such as ECM Heidelberg, San Remo, Vibiemme, La Scala, Bezzera, Grimac, Astoria, La Pavoni and wega.
This stainless steel water filter has a outer diameter of 8,5mm...
€3.47
Ulka vibration pumps suction fitting
The item on this product page is one which can be used on various Ulka espresso machines vibration pumps. This pump inlet can be used with brands such as Grimac, Elektra, Fiorenzato, Rancilio, Saeco and Gaggia. The Ulka part reference number for this item is 8.01.033
This 90 degree fitting has been made from a plastic called santoprene. The internal pump...
€2.76
E61 style group spout breaker
On this page you will find a brewing group spray nozzle. This nozzle is one of the most used spay nozzles used in the world of espresso machines. The nozzle has a outer diameter of 30mm and the male thread, which threads into the brewing group, is M10x1mm.
What is the purpose of having a nozzle. Well the spray nozzle is located above the shower screen....
€6.37
Drain valve assembly
The drain valve is responsible for draining the last water out of the E61 style brewing group. This espresso machine part is made up out of 4 parts. The gasket holder, the gasket, small brass washer and a triangular valve rod. The total length of this part is 27mm.
This drain valve used in a variety of espresso machine brands like: Expobar CTAV1-05,...
€8.99
Gasket PTFE 22x16x2mm
This a universal Polytetrafluoroethylene (PTFE) gasket with 22x16x2mm. The gasket is used on a variety of espresso machine components. This type of gasket found boilers, brewing group and valve assemblies.
The most common location for this to seal off the 3/8” male nut on the top of the Faema E61 and E61 style brewing groups like with Bezzera, Brasilia,...
€0.86
Contact thermostat 135°C with M4 thread
On this product page you will find a contact thermostat which is used on a variety of espresso machine brands. You can find this contact thermostat on Bezzera and Rocket espresso machines. The Bezzera part reference is 7434009 and the Rocket part reference is C199901550
This contact thermostat is set at 135°C and is a manual reset model. The contact...
€10.71
O ring gasket 7.59x2.62mm epdm
The o ring on this product page can be used on various espresso machines and with various applications. Such as steam and water valves, Brewing groups, water inlets and boilers. You can find this type of o ring with Bezzera, Casadio, Cimbali and Faema espresso machines.
This o ring has been made from EPDM. The cord diameter is 2,62mm and the internal...
€1.03
Bezzera heating element 1350W 110V
The heating element on this page is a element used in various Bezzera espresso machines with a single group. The Bezzera part reference for this item is 5721127TP .
This heating element produces 1350W at 110V and has 2 connecting poles. The immersed length of the heating element is 160mm. This heating element is a screw in type of heating element and has...
€55.63
Faema E61 group infusion spring
On this page you will find a stainless steel compression spring with a outer dimension of 14mm and a length at rest of 45mm. This compression spring is being used in a variety of espresso machine brewing groups. This ranges from the famous Faema E61 brewing group, the E61 style brewing group. But also a variety of other type of brewing groups used by...
€1.62
Bezzera Heating element 220/240V - 1250/1450W
On this product page you will find a heating element suitable for a single group Bezzera espresso machine boiler. This Bezzera heating element has the part reference 5722240.
This heating element supplies 1250/1450W at 220/240V, the element has 2 connecting poles. The immersed length of the heating element is 160mm. This is a screw in heating element and...
€55.63
Compression spring 14x33mm
This stainless steel spring 14x33mm is used in a variety of locations in a espresso machine. The most common location for this compression spring is in a Faema E61 brewing group of a E61 style brewing group. The spring seats inside the top trumpet and makes sure that the top brewing valve closes when the brewing process is stopped, and the lever has been...
€2.17
Filterbasket 2 coffee 12gr 70x21mm
The 2 coffee filterbasket on this page can be used a big variety of espresso machine brands. You can use this basket on brands such as Casadio, Brugnetti, ECM Heidelberg, San Remo, Faema, Vibiemme, La Scala, Grimnac. This filterbasket has been made by the Italian company IMS Filtri. The IMS part reference is CF2T068. Note: this is not a competition...
€5.69
IMS double filterbasket 12/18gr B702TH24.5M
A lot of the filterbasket sizes are quite standardized. This IMS filterbasket is good example of this. The basket is made by IMS filtra, but it is a competition basket and not from the standard IMS basket line. The IMS part number for this double filterbasket is B702TH24.5M.
The double filterbasket is made from stainless steel 304, food safe. The outer...
€25.48
Drain valve pre-assembled 52,8mm
The drain valve on this page is used in a variety of E61 style of brewing groups. You will find this model of drain valve assembly on brands such as Bezzera, ECM Heidelberg, Isomac, La Pavoni, Brasilia, Grimac and Royal.
This drain valve comes pre-assembled. The assembly contains the triangular shaped shaft, gasket holder, gasket, flat washer and the...
€15.01
Compression spring 13x42mm
This stainless steel compression spring is used in the Faema E61 and E61 style brewing groups. But what does this specific do? Well this is the last compression spring in the brewing group. It is the compression spring in the brewing valve which closes the exhaust valve all the way at the bottom of the E61 brewing group.
Besides the E61 group spring it is...
€2.02
Faema E61 brew valve assembly
The item on this product page is used in the famous Faema E61 brewing groups, but it can also be used on various other E61 style of brewing groups. This valve component can be used on E61 style of brewing groups used by Royal, La Scala, Bezzera, Isomac, Pavoni. The part reference numbers can be found in the extra info tab
This valve assembly is used in...
€9.16
Faema E61 camme spring 15x25mm
This stainless steel compression spring with the dimensions of 15x25mm is normally used as a camme spring on a Faema E61 brewing group or on E61 style brewing groups. Like with the Faema E61, Faema E61 legend, Grimac, Isomac, Pavoni, Wega and a variety of other brands which use a e61 style of brewing group.
Besides that option, this model compression...
€1.52
Bezzera Galatea Domus Models and Specifications
-
Voltage and Heating Elements:
- Available for both the 230V and 110V markets.
- Each model is equipped with a 1350W heating element, ensuring efficient heating and consistent temperature control.
-
Water Supply Options:
- The Galatea Domus provides two methods for sourcing water:
- Water Tank Model: Ideal for locations without a direct water supply, featuring a 4-liter capacity water tank at the back of the machine.
- Main Water Supply Model: Connects directly to the main water line for continuous operation.
- The Galatea Domus provides two methods for sourcing water:
-
Boiler Capacity:
- The espresso machine is fitted with a 2-liter boiler, allowing it to produce a sufficient volume of steam and hot water for consistent performance.
-
Pump Options:
- The Galatea Domus S Model is equipped with a vibration pump, which is compact and reliable for domestic use.
- The Galatea Domus R Model features a volumetric pump, offering more precise control over water flow.
E61-Style Brewing Group
The Bezzera Galatea Domus is built with the iconic E61-style brewing group, which is known for its stability and consistency in espresso extraction. However, it is essential to note:
- Not all E61-style groups are identical across different brands. As a result, some components may not be interchangeable.
- The portafilters used for the Galatea Domus may differ slightly from those of other E61-style machines.
Bezzera Galatea Domus Spare Parts Selection
We offer a wide range of spare parts for the Bezzera Galatea Domus, including:
- Heating Elements for both the 110V and 230V models
- Water Tank and Main Water Supply Parts for both water source configurations
- Pump Components for both vibration and volumetric pump models
- E61-Style Brewing Group Parts tailored specifically for the Galatea Domus
- Steam and Water Wand Parts for optimal functionality
Need Help Finding the Right Part?
If you’re unsure about which spare part fits your Bezzera Galatea Domus or have questions about component compatibility, don’t hesitate to contact us. We are here to assist you in sourcing the correct parts to keep your Galatea Domus espresso machine operating at its best.