Filter by
Type part
more... less
Type
Price
Filter

Bezzera Galatea Domus

Our selection of Bezzera Galatea Domus spare parts

On this category page you will find various spare part for the domestic espresso machine, the Bezzera Galatea Domus. This espresso machine is a single group domestic espresso machine. The brewing group used on this espresso machine is a E61 style of brewing group, not all the E61 style of brewing groups have the same components. This espresso machine has been fitted with a steam and water wand.

The Bezzera Galatea domus is available for the 230V market, but also for the 110V market. For the 230V market there is installed a 1350W heating element, for the 110V market this is also the case.

This espresso machine has 2 options for getting it’s fresh water. Option one is when a water tank is installed on the back. The other option is from the main water supply. The Bezzera Galatea Domus with the tank can hold 4 litre of water in that tank. Both models use the same boiler, this can hold approx. 2 litre of water.

The Bezzera Galatea Domus is available with a vibration pump (S model) and with a volumetric version (R model)

Bezzera Galatea Domus spare parts

IMS double filterbasket 12/18gr B702TH24.5M

A lot of the filterbasket sizes are quite standardized. This IMS filterbasket is good example of this. The basket is made by IMS filtra, but it is a competition basket and not from the standard IMS basket line.  The IMS part number for this double filterbasket is B702TH24.5M. The double filterbasket is made from stainless steel 304, food safe. The...
€20.32

Compression spring 13x42mm

This stainless steel compression spring is used in the Faema E61 and E61 style brewing groups. But what does this specific do? Well this is the last compression spring in the brewing group. It is the compression spring in the brewing valve which closes the exhaust valve all the way at the bottom of the E61 brewing group. Besides the E61 group spring it...
€1.61

Faema E61 plug for camme holder

This ½” chrome plated stuffing nut has a central hole of 10,7mm. The item itself has a height of 17mm. You need a metric key 22 to install this item. This is quite a common key size in most peoples toolbox. But what is the function of this part and where can it be found. This threaded stuffing gland is used in the side of the Faema E61, Faema E61 Legend...
€7.11

Filterholder gasket 72.5x57x8 mm

The portafilter gasket on this product page can be used with a wide selection of brands. This portafilter gasket can be used on Brasilia, San Remo, la Scala, Bezzera, Faema, Vibiemme and Pavoni espresso machines. This gasket has been made from NBR. The outer diameter is 72,5mm, the inner diameter is 57mm and the thickness is 8mm. This gasket has been made...
€2.93

Wera shower screen screwdriver slotted

In some cases, the shower screen is attached with a screw, in most cases that is a Philips or a slotted screw. It is difficult to remove it with a regular screwdriver due to the limited height under the brew group.  But for that you need a shortened slotted screwdriver, in this case the one from the German brand Wera, which fits well under the brewing...
€11.50
Brooks Parts | Olab solenoid valve 2 way 1/8” 230V Brooks Parts | Olab solenoid valve 2 way 1/8” 230V
  • New

Olab solenoid valve 2 way 1/8” 230V

This solenoid valve is made by the company Olab. This specific valve is a 2 way valve which is used to control the flow of water. This specific model can be used on a variety of Bezzera espresso machines. This valve is compatible with the Bezzera part reference numbers 7702322 and 7702322.01. This valve is Olab K08198-B-B This solenoid valve has on the...
€82.76
ODE solenoid valve 3 way 1/8” 230V 5W ODE solenoid valve 3 way 1/8” 230V 5W
  • New

ODE solenoid valve 3 way 1/8” 230V 5W

The item on this page is a 3 way solenoid valve made by the Italian brand ODE. This valve can be used on a variety of domestic Bezzera espresso machines. It is compatible with the Bezzera part references 7702305 and 7702316. This 3 way solenoid valve has a female in and outlet, which has a 1/8” BSP-G thread. The coil is a 5W 230V model. The thread on the...
€0.00

Drain valve assembly

The drain valve is responsible for draining the last water out of the E61 style brewing group. This espresso machine part is made up out of 4 parts. The gasket holder, the gasket, small brass washer and a triangular valve rod. The total length of this part is 27mm. This drain valve used in a variety of espresso machine brands like: Expobar CTAV1-05,...
€7.17

Faema E61 sleeve

On this page you will find a camme guide bushing. This part is a generic part for Faema E61 brewing groups and the brewing groups made in the E61 style. This part is made from brass with a total length of 28mm, the outer dimensions are 15 and 10 mm. The ID is 8mm and the head of the bushing has a thickness of 5mm. This part slides over the shaft off the...
€2.52

group gigleur M5x1 hole ø 0.7 mm

The product on this page is a gigleur/nozzle for inside a brewing group. This type of nozzle can be used with brands from the Astoria CMA group. For Astoria the part number is 10300001 and for Wega the part number is WY10300001 This specific gigleur is made from brass and has a central hole of 0,7mm. The threads used are a M5 with a pitch of 1mm....
€2.77

E61 style spring holder

The item on this product page is a spring guide bushing used on various E61 Style of brewing groups. You can use this item with brands such as ECM Heidelberg, La Scala, Bezzera, Isomac, Pavoni and Brasilia. The Bezzera part reference is 7479942, the Brasilia part reference number is 13657.0.00.04, for ECM Heidelberg it is B7479942, for Isomac ISBUS313116...
€4.10