Filter by
Type part
more... less
Type
Price
Filter

Bezzera Galatea Domus

Our selection of Bezzera Galatea Domus spare parts

On this category page you will find various spare part for the domestic espresso machine, the Bezzera Galatea Domus. This espresso machine is a single group domestic espresso machine. The brewing group used on this espresso machine is a E61 style of brewing group, not all the E61 style of brewing groups have the same components. This espresso machine has been fitted with a steam and water wand.

The Bezzera Galatea domus is available for the 230V market, but also for the 110V market. For the 230V market there is installed a 1350W heating element, for the 110V market this is also the case.

This espresso machine has 2 options for getting it’s fresh water. Option one is when a water tank is installed on the back. The other option is from the main water supply. The Bezzera Galatea Domus with the tank can hold 4 litre of water in that tank. Both models use the same boiler, this can hold approx. 2 litre of water.

The Bezzera Galatea Domus is available with a vibration pump (S model) and with a volumetric version (R model)

Bezzera Galatea Domus spare parts

Drain valve pre-assembled 52,8mm

The drain valve on this page is used in a variety of E61 style of brewing groups. You will find this model of drain valve assembly on brands such as Bezzera, ECM Heidelberg, Isomac, La Pavoni, Brasilia, Grimac and Royal. This drain valve comes pre-assembled. The assembly contains the triangular shaped shaft, gasket holder, gasket, flat washer and the...
€11.97

Compression spring 13x42mm

This stainless steel compression spring is used in the Faema E61 and E61 style brewing groups. But what does this specific do? Well this is the last compression spring in the brewing group. It is the compression spring in the brewing valve which closes the exhaust valve all the way at the bottom of the E61 brewing group. Besides the E61 group spring it...
€1.61

Drain valve assembly

The drain valve is responsible for draining the last water out of the E61 style brewing group. This espresso machine part is made up out of 4 parts. The gasket holder, the gasket, small brass washer and a triangular valve rod. The total length of this part is 27mm. This drain valve used in a variety of espresso machine brands like: Expobar CTAV1-05,...
€7.17

Ulka Vibration pump EX5 230V 50/60Hz with brass outlet

On this page you will find one of the most used espresso machine pumps. The Ulka Ex5 48W 230V espresso machine vibration pump. This pump produces 48W at 230V with 50Hz. The inlet connection is 6mm, suitable for a silicone hose. The pump outlet is a 1/8” Bsp, this side is made from brass. There is also a Identical pump the Ulka EP5, this one has a...
€34.78

PTFE gasket 35x30x2mm

The gasket on this page is a Polytetrafluoroethylene (PTFE) gasket with the dimensions 35x30x2mm. This specific gasket is used on 3 specific places on the E61 style brewing group (the Faema E61 and Faema E61 legend group use a different size of ptfe gasket). It is used to seal off the top trumpet or drain sleeve, on the side of the group the camme holder...
€1.17

Gasket AFM 34 22x16x2mm

The most common location for this to seal off the 3/8” male nut on the top of the Faema E61 and E61 style brewing groups like with Bezzera, Brasilia, Grimac, La Scala, Vibiemme and Wega.But also as a gasket to seal off boiler components with brands like Vibiemme and Grimac, This gasket has been made from the material AFM 34 made by the german company...
€1.21

Drain valve sleeve

The E61 drain valve sleeve on this page can be used with a variety of E61 style brewing groups. You can use this drain sleeve on Brasilia, Faema, Grimac, Bezzera, Wega, La Scala and Royal brewing groups. This drain sleeve has been made from machined brass. To reach the shiny chrome surface, the brass has been polished first, then nickel plated and at the...
€67.63

Ulka vibration pumps suction fitting

The item on this product page is one which can be used on various Ulka espresso machines vibration pumps. This pump inlet can be used with brands such as Grimac, Elektra, Fiorenzato, Rancilio, Saeco and Gaggia. The Ulka part reference number for this item is 8.01.033 This 90 degree fitting has been made from a plastic called santoprene. The internal pump...
€2.20

Faema E61 sleeve

On this page you will find a camme guide bushing. This part is a generic part for Faema E61 brewing groups and the brewing groups made in the E61 style. This part is made from brass with a total length of 28mm, the outer dimensions are 15 and 10 mm. The ID is 8mm and the head of the bushing has a thickness of 5mm. This part slides over the shaft off the...
€2.52

Solenoid valve silicone o ring 6,07x1,78mm

This o ring is one of the most common parts in the world of espresso machines. The main function of this o ring is to seal off a flanged solenoid valve. Every flanged solenoid valve uses 2 of these. But you will also find them in applications like steam and water valves and water inlet taps. The o ring has a wire diameter of 1,78mm and a internal...
€0.53

E61 style cam holder

The cam holder on this product page can be used on a variety of E61 brewing groups. Like with ECM Heidelberg, La Scala, Bezzera, Grimac, La Pavoni Wega and Brasilia. The cam holder on this page has been made from machined brass. Which have been nickel and chrome plated. For easier installation the edges have been rounded off. The item has a overall...
€20.73