Brasilia espresso machine parts
The gasket on this product page is used on the Faema E61 brewing groups and the E61 style of brewing groups such as with Rocket, La Scala, Grimac, la Pavoni and Wega. The part reference numbers for this gasket can be found in the extra info tab.
This gasket is made from AFM34 from the company Victor Reinz. This gasket has good sealing properties, even...
€1.10
Portafilter gasket conical 66x56x6mm
The filter holder gasket shown on this page is used on various Brasilia espresso machine brewing groups. The Brasilia part reference for this item is 01393.0.00.02.
This gasket has been made from NBR. The outer diameter is 66mm, the inner diameter is 56mm and the thickness is 6mm. This gasket is shaped conically and has been made in the EU.
This...
€3.05
Water level nut
This sight glass fitting is used on a variety of espresso machine brands such as Vibiemme, La Scala, Brasilia and Gaggia. The Brasilia part reference is 00089.0.10.04 , the Gaggia reference is LV0505 and the Vibiemme (VBM) part references are RACCP227 and RACCP427.
This sight glass fitting has a male 3/8” BSP-G thread. The central hole is...
€5.12
Steam water valve fitting 3/8m 1/8m
The item on this product page is a fitting used on various steam and water valves. You can use this fitting on Brasilia and Marzocco espresso machines. The Brasilia part references are 07202.0.00.04 and 07202.0.10.04, for Marzocco it is L053/2.
This fitting is made from brass and has been nickel plated (in some cases they are just brass). On...
€3.06
Heating element gasket PTFE 57x43x3mm
On this page you will find a PTFE heating element gasket is suitable for a variety of brands such as Victoria Arduino, Grimac, Astoria, Faema and San Remo.
This heating element gasket has a outer diameter of 57mm a inner diameter of 43mm and a thickness of 3mm. This size of gasket is suitable for a 1”1/4 screw in heating element.
€2.71
Orange push button 16A 250V
The round bipolar push button on this page is used in various Brasilia espresso machines. The Brasilia part reference for this item is 01976.2.00.08.
This round orange/yellow coloured switch is rated up to 16A at 250V. This switch is mounted in a hole which needs to be 25mm. This switch has been made in Italy.
You can use this switch on the Brasilia...
€7.65
Tap joint spring guide
This steam pipe bushing is a important element in the sealing and functioning of a steam and water valve. This bushing is pushed down on one side with a spring, this bushing has on the other side a hollow shape so that the ball of the steam and water valve can slide smoothly over the brass.
This brass bushing has multiple dimensions. The external...
€0.96
Filterholder gasket 72.5x57x8 mm
The portafilter gasket on this product page can be used with a wide selection of brands. This portafilter gasket can be used on Brasilia, San Remo, la Scala, Bezzera, Faema, Vibiemme and Pavoni espresso machines.
This gasket has been made from NBR. The outer diameter is 72,5mm, the inner diameter is 57mm and the thickness is 8mm. This gasket has been made...
€2.93
Nipple 3/8" x 3/8" MM
Brass nipple 3/8" x 3/8" MM BSP-G
Return to our fitting overview
€3.46
Solenoid valve silicone o ring 6,07x1,78mm
This o ring is one of the most common parts in the world of espresso machines. The main function of this o ring is to seal off a flanged solenoid valve. Every flanged solenoid valve uses 2 of these. But you will also find them in applications like steam and water valves and water inlet taps.
The o ring has a wire diameter of 1,78mm and a internal...
€0.53
Boiler top fitting 1/2"
The top HX boiler fitting, a generic item you will find with a lot of espresso machine brands. This ranges from Vibiemme, Grimac, Pavoni, La Scala to Expobar, Brasilia and BFC.
This specific item is a casted brass fitting. The side which is screwed into the HX is a ½”BSP-g and the side where the tube to the brewing group goes to is also a...
€15.17