Filter by
Price
Manufacturers
Brand
more... less
Type part
more... less
Filter

Water valve

Coffee and espresso machine water valve parts

On this page is a overview of the components you need for your espresso and coffee machine water valves.  You can find a variety of espresso machine water valve parts like: gaskets, complete water valves, valve body’s, knobs and a lot more.

If you can’t find the part your looking for just send us a message and we will try to find the part your looking for

Espresso machine parts water valve

La Spaziale valve axle

On this page you will find a brass valve shaft. This brass valve shaft is made by La Spaziale. The La Spaziale part number for this part is 00232. The steam valve shaft has a threaded section, which screws into the valve body with no 00218. On the shaft there is also a recess for a o ring to seal off the shaft. And at the end of the round shaft they have...
€13.08

La Pavoni/Gaggia spring 12x22mm

The compression spring on this page can be used on a variety of espresso machine brands such as La Pavoni and Gaggia. This compression spring is mainly used in a steam and water valve. The La Pavoni part reference is 311409 and the Gaggia part reference is WGARB0882  This stainless steel compression spring has a outer diameter of 12mm and a...
€3.95

La Spaziale steam/water valve knob

The steam/water valve knob on this page is made by the brand La Spaziale and is a OEM/original part. The la Spaziale part number for this knob is 01558. This steam/water valve knob is suitable in combination with the valve shaft part number 01391. This shaft is round but has got a flat surface on one side. This knob is compatible with the La Spaziale...
€12.38

Brasilia steam valve spring

The stainless steel compression spring on this page is suitable for the Brasilia Bar-America. This spring is used in the steam and water valve as a gasket return spring. The Brasilia part reference for this item is 00866.0.00.03 This spring has a outer diameter of 12,5mm and a overall length of approx. 27,7mm.
€10.21

Steam water valve joint o ring 12,1x2,7mm EPDM

The o ring on this page can be used on various steam and water valves used on San Remo espresso machines. The San Remo part reference number for this o ring is 10402082  This o ring has been made from EPDM. This o ring has a cord diameter of 2,7mm. the inner diameter is 12,1mm. This o ring has been made in Italy. You can use this o ring on the San...
€0.89

Cimbali/Casadio retaining ring steam and water valve

On this page you will find a bore retaining ring for steam and water valves used by the La Cimbali group. This item is a OEM/Original part. The item is used hold the steam/water shaft inside the valve. You are unable to completely turn out this shaft. This retaining ring has a outer diameter of 23,5mm. the ring has been made out of steel spring C80...
€2.21

Rubber protecting sleeve for 10mm steamtubes

The item on this page is a steam and water tube burn protecting sleeve. This specific model of sleeve can be used on various brands of the La Cimbali group such as Faema, Casadio and Cimbali. The part references for these brands are all 927132010 . This rubber grip is suitable for steam and water tubes which have a diameter of 10mm. this specific item has...
€9.95

Faema E61 steam/water group expanding spring

Every valve needs to have return spring to close again. On this page you will find the return spring used in the Faema E61 steam and water valve. As well in their successors used in Vibiemme, Grimac and la Scala machines. This spring is made out of stainless steel and has an external diameter of 12,5mm and a length of 30mm. So, steam and water valves...
€1.80

Elektra steam water gasket

The item on this product page is a conical PTFE gasket. This PTFE gasket can be used on various steam and water valves on Elektra espresso machines. The Elektra part reference for this item is 01178035  This conical PTFE gasket has a outer diameter of 12mm a inner diameter of 5mm and a thickness of 5mm. This item has been made in Italy. You can use...
€5.15

La Cimbali M39 steam water valve

This steam water valve is suitable for the La Cimbali M39 and the La Cimbali M39-GT. What is different then the other La Cimbali steam valve? The steam valve of the M39 has a 90 degree outlet and the standard steam valve has a 120 degree orientation. This steam valve is a ready to install steam valve. The valve comes including all the internals.
€49.54

O ring 20.63x2.62mm viton

On this page you will find a o ring which has a cord diameter of 2,62mm and a internal diameter of 20,63mm. the material for this o ring is Viton. The application in espresso machines for this o ring is really broad. This ranges from application in brewing groups with brands like ECM Heidelberg, la Scala, Bezzera and Brasilia. But also the application in...
€2.35

Water stem complete

The item on this page is a complete water stem. This item can be used on variety of espresso machines such as San Remo, Vibiemme, La Scala, Grimac, Pavoni, Rocket and Gaggia. This water stem has a 1/8” BSP-G female thread. The water stem does have the filter membrane inside, this can be replaced. The item has been made in Italy. This water stem...
€10.30