Filter by
Manufacturers
Type part
more... less
Type
Price
Filter

Faema E61 Legend Espresso Machine Parts: A Comprehensive Overview

The Faema E61 Legend espresso machine is a timeless icon in the world of coffee equipment. Originally introduced in the 1960s, the E61 revolutionized espresso brewing with its innovative design and functionality. Around the turn of the 21st century, the Faema E61 was reintroduced in the form of the Faema E61 Legend, bringing back the classic design while incorporating modern technological improvements. This page is dedicated to exploring the key parts of the Faema E61 Legend, discussing its three main configurations, and highlighting the technical differences between the original and the modern Legend version.

Faema E61 Legend Espresso Machine Parts & Features | Brooks Parts

Faema E61 valve gasket 15,5x7,5x4mm

This gasket is again such a standard type of gasket in the world of espresso coffee machines. It is the EPDM gasket 15.5x7.5x4mm. This gasket is used a variety of applications on espresso machines. Offcourse on the Faema E61 brewing group as well for the E61 style brewing group, as the camme shaft gasket. By brands like Isomac, Bezzera, ECM, Brasilia,...
€0.74
Quick-view

Portafilter gasket 73x57x9mm

Every brewing group uses a portafilter gasket. In this case it is a 73x57x9mm gasket. In this case they are made from a food grade nitrile butadiene rubber(Nbr) The OD and ID of 73x57mm is quite a standard size. You will see this size with brands like Expobar, Vibiemme (VBM), La Scala, Bezzera, Faema and Azkoyen. This doesn’t mean that these brands don’t...
€4.17
Quick-view

Filterholder gasket 72.5x57x8 mm

The portafilter gasket on this product page can be used with a wide selection of brands. This portafilter gasket can be used on Brasilia, San Remo, la Scala, Bezzera, Faema, Vibiemme and Pavoni espresso machines. This gasket has been made from NBR. The outer diameter is 72,5mm, the inner diameter is 57mm and the thickness is 8mm. This gasket has been made...
€3.67
Quick-view

Faema E61 valve gasket 13x4x4mm

The valve gasket on this page can be used on numerous of espresso machine brands such as Vibiemme, Wega, La Scala, Faema, La Pavoni, Brasilia and Grimac. This gasket in mainly used in the steam and water valves as well as in the water inlet valves. But the best example is in the E61(type) of brewing groups. The part reference list can be found in the...
€0.74
Quick-view

Filterholder suplement gasket 73x59x0.8mm

The paper shim on this page is one of the most widely used paper shim. You can use this type with a wide selection of espresso machine brewing groups. What are the dimensions of this paper shim? They have a outer diameter of 73mm, a inner diameter of 59mm and a thickness of 0,8mm. What does a paper shim do? Brewing group locking mechanisms wear due to...
€0.65
Quick-view

O ring gasket 6.07x1.78mm Solenoid valve

This o ring is one of the most common parts in the world of espresso machines. The main function of this o ring is to seal off a flanged solenoid valve. Every flanged solenoid valve uses 2 of these. But you will also find them in applications like steam and water valves and water inlet taps. The o ring has a wire diameter of 1,78mm and a internal diameter...
€0.61
Quick-view

E61 style groups shower without welding 60mm

The function of a shower screen is to spread the water coming out off the group on a equal way over the coffee. One of the standardized sizes and most common, is the 60mm shower screen. This shower is a pressed model made by IMS IMSDR300. The outer diameter is 60mm, the internal height is 17mm and the diameter of the punctured holes is 2,5mm Note: this is...
€3.02
Quick-view

Portafilter gasket 73X57X8.5mm

This portafilter gasket has a outer diameter of 73mm a inner diameter of 57mm and a thickness of 8,5mm. 73x57x8,5mm. This type of brewing group gasket is one of the most standard portafilters around. You will find this on the Faema E61 groups as well as on the E61 style groups used by Vibiemme, La Scala, Bezzera, San Remo, Fiorenzato and Grimac. Of this...
€4.19
Quick-view

Faema Portafilter gasket 74x58x8mm Original

The portafilter gasket ton this product page is a OEM/Original Faema spare part, but can also be used on various Casadio espresso machine models. The Casadio part reference number is 402199010, the Faema part reference numbers are402199000, 402199010 and 4701016528.  This gasket is made from NBR. The outer diameter is 74mm the inner diameter is 58mm and...
€6.06
Quick-view

E61 shower screen old style 60mm

This article is one of the earliest designs of the 60mm shower screen. This shower screen is made by IMS CFDR070.  The border diameter is 60mm, it has a internal height of 15,7mm. The internal holes, 112 in total, have a diameter of 2mm Note: this is not a specialty coffee shower, but IMS also produces normal showers. This is, unlike other 60mm models, a...
€4.29
Quick-view

AFM 34 heating element gasket 57x43x3mm

The heating element gasket on this page can be used on a variety of heating elements. This gasket has a outer diameter of 57mm a inner diameter of 43mm and a thickness of 3mm. The fibre material used is AFM 34 made by the German company Victor Reinz. This gasket material is food safe and can handle the pressure and temperatures which occur in every...
€4.45
Quick-view

Portafilter gasket 73x57x9mm red silicone

The portafilter gasket shown on this product page is one of the most common sizes found on commercial espresso machines. But this gasket hasn’t been made from NBR as traditionally done, but from food grade silicone. You can find this portafilter gasket on brands such as Faema, Vibiemme, Bezzera and La Scala. This red silicone gasket has a outer diameter...
€5.67
Quick-view

Faema E61 gasket PTFE 36.5x30x2mm

This PTFE gasket can be used on the famous Faema E61 brewing groups, but also on a variety of E61 style of brewing groups. Like with La Scala, Grimac, Pavoni, Wega and Fiorenzato. The part reference numbers can be found in the extra info tab. This flat gasket is made from the material PTFE. The outer diameter is 36,5mm and the inner diameter is 30mm and...
€0.94
Quick-view

Level indicator red ball 5,8mm

This red ball is a level indicator ball. This ball floats inside the water level tube. Seen it’s not always easy to see the water level makes a floating red ball it a lot easier. There are more colours available with different diameter of balls. This red ball has a diameter of 5,8mm and is made in Italy. This type of level indicator can be found in a...
€2.18
Quick-view

Anti vacuum valve V.A.R. 1/4"

On this product page you will find a anti vacuum valve. This valve is made completely out of brass and can be easily disassembled. This type of anti vacuum valve is used with quite a lot of espresso machine brands. This valve has a male ¼”BSP-G thread. The o ring inside the valve is made from HNBR, but the o ring end stop is made from PTFE. As mentioned...
€10.91
Quick-view

PTFE gasket 26x21x2mm

This gasket has been made from the fibre material AFM 34 in Germany. This gasket has a outer diameter of 26mm a inner of 21 and a thickness of 2mm. This gasket is used in a variety of components throughout a espresso machine. The most common place where this coffee machine gasket is used, is in the Faema E61, Faema E61 legend and E61 style brewing groups....
€1.38
Quick-view

Portafilter gasket 73x57x8,5mm

The portafilter gasket on this page is used on various Wega espresso machine models. The Wega part reference for this item is WY12228. This portafilter gasket has been made from NBR. This gasket has a outer diameter of 73mm a inner diameter of 57mm and a thickness of 8,5mm. There are on the inside 3 cuts. This gasket has been made in Italy. You can use...
€3.93
Quick-view

Ffilterbasket 2 coffee 14gr 70x24,5mm

The 2 coffee filterbasket on this page can be used a big variety of espresso machine brands. You can use this basket on brands such as Brasilia, Elektra, Victoria Arduino, Faema, Cimbali, Casadio, La Scala. This filterbasket has been made by the Italian company IMS Filtri. The IMS part reference is CF2T069. Note: this is not a competition filterbasket....
€5.69
Quick-view

Safety valve 3/8" 2.0 bar CE PED IV certified

The most important part on a espresso machine is the safety valve. This part prevents that a boiler can explode. The safety valve will open up when the pressure inside the boiler becomes too high. This specific safety valve is made out of brass. The thread type used for this safety valve is 3/8”BSP-G. The calibrated pressure of the valve is 2.0 bar, this...
€10.47
Quick-view

Faema E61 group locking gasket

The group locking gasket on this product page can be used for installing the classical Faema E61 groups to the frame of the machine. But this gasket is also used on Grimac E61 brewing groups. The Faema part reference for this item is 4701135888 and the Grimac part references are F045 and GR721. This group locking gasket can be used on the Faema E61, Faema...
€1.49
Quick-view

Asco (Sirai) pressure switch P302/6

The Asco P302/6 pressure switch (formerly Sirai) is one of the most used 3-phase pressure switches in professional espresso machines. It automatically controls the boiler pressure by switching the heating element on and off at the set point. When the boiler reaches the preset pressure, the membrane opens the electrical circuit, and when pressure drops,...
€74.07
Quick-view

Solenoid valve screw M4x10

The product on this page is a Allen head screw for attaching a solenoid valve to a other surface. This type is a M4x10mm. It is a stainless-steel bolt according to UNI 5931 - DIN 912 - ISO 4762 You will only need this type of Allen head screw to attach the flanged solenoid valves to a flat surface. This type of Allen screw is used in a lot of espresso...
€0.79
Quick-view

E61 style group spout breaker

On this page you will find a brewing group spray nozzle. This nozzle is one of the most used spay nozzles used in the world of espresso machines. The nozzle has a outer diameter of 30mm and the male thread, which threads into the brewing group, is M10x1mm. What is the purpose of having a nozzle. Well the spray nozzle is located above the shower screen....
€6.37
Quick-view

Faema E61 Legend Configurations

The Faema E61 Legend espresso machine comes in three distinct configurations:

  • Faema E61 Legend S1
  • Faema E61 Legend S2
  • Faema E61 Legend S3

Each of these configurations is built upon the same core design principles but may differ in terms of features, group heads, and capacities. While the exterior design retains the classic aesthetic of the original E61, the internal mechanics have been upgraded to meet modern standards. These changes make the Faema E61 Legend a reliable choice for both coffee enthusiasts and professional baristas, offering the charm of a vintage machine with the reliability of modern technology.

Key Differences Between the Faema E61 and Faema E61 Legend

At first glance, the Faema E61 and the Faema E61 Legend look almost identical, especially in their sleek, polished exterior design. However, under the hood, there are several significant technical differences that set the Legend apart from the original.

1. Water Level System

One of the most notable updates in the Faema E61 Legend is the water level system. In this machine, the water level is monitored by a casted housing unit equipped with a sight glass on the front. This type of water level system is not unique to the Faema E61 Legend; it can also be found on other models like the Faema E92, Faema E97, and Faema Due. Additionally, some models of La Cimbali machines, such as the La Cimbali M39 and La Cimbali M39 GT, also use this system. The sight glass makes it easy for the user to monitor water levels at a glance, ensuring the boiler never runs dry.  Learn more about the Faema E61 Legend Water Level System.

2. Pump and Motor Placement

In the original Faema E61, the pump and motor were located outside of the machine, requiring external installation and adding to the complexity of setup. However, in the Faema E61 Legend, both the pump and motor are installed inside the machine, making it more compact and easier to maintain. This internal integration also reduces the risk of external elements affecting the operation of the machine. For information about Faema E61 Legend Pump and Motor Parts, click here.

3. Autofill System

A major upgrade in the Faema E61 Legend is the inclusion of an autofill system. This system ensures that the boiler is always adequately filled with water, significantly reducing the risk of dry-boiling the heating element. Dry boiling can cause extensive damage to the heating element, leading to costly repairs. The autofill system automatically replenishes the water in the boiler as needed, improving the machine's safety and efficiency. Additionally, a safety thermostat has been installed inside the heating element to further prevent overheating and dry boiling.

4. Pressure Switch Upgrade

Traditionally, the Faema E61 used a mercury pressure switch, which was effective but now considered outdated due to environmental and safety concerns. The Faema E61 Legend has replaced the mercury switch with a modern Asco pressure switch, previously manufactured by Sirai. This new pressure switch is more reliable, efficient, and eco-friendly, aligning with modern safety standards.

Modern Enhancements for a Classic Machine

While the Faema E61 Legend retains much of the charm and aesthetic appeal of its predecessor, the upgrades in water regulation, motor placement, safety features, and pressure control make it a more reliable and user-friendly machine. These changes ensure that the machine not only produces consistently high-quality espresso but also operates safely and efficiently in both home and commercial settings.

Have Questions About Your Faema E61 Legend?

Whether you're a seasoned barista or a home espresso enthusiast, maintaining and understanding your Faema E61 Legend is essential for getting the most out of your machine. If you have any questions about the parts or need assistance with your machine, don't hesitate to contact us. We are happy to help you with any inquiries or replacement parts to keep your Faema E61 Legend in optimal working condition.

The Faema E61 Legend, with its combination of classic design and modern technology, remains a top choice for espresso lovers worldwide.