0
My cart
Home
Flojet BW5004A water pump
The item on this product page is the Flojet BW5004A water pump. When you don’t have a fixed water main. This pump is used to pump up water from a dispenser bottle to the espresso machine.
This Flojet can be powered on 100/240V AC current and has a output of 12V DC. The pump can pump 3,78L per minute (or 1gpm). This Flowjet comes with e EU plug. The Flojet...
€371.63
Wega bottomless portafilter
On this product page you will find a bottomless portafilter which is suitable to use on various Wega espresso machines.
This bottomless portafilter comes as a set. So the portafilter, including shiny handle, and installed in the portafilter a filter basket spring and a 2 coffee filterbasket. The portafilter has been made from casted and machined brass...
€60.39
Motta tamper 58mm ash wood handle
The tamper on this product page is made by the Italian company Motta, one of the most famous espresso machine accessory manufactures.
This specific tamper can be used on most commercial and domestic prosumer espresso machines, the most important thing is that the filterbasket needs to have a slightly bigger diameter then 58mm.
This specific tamper has a...
€68.77
Sirai solenoid 2 way valve 1/8" 1/8" 230V 50/60Hz
Sirai solenoid 2 way valve 1/8" 1/8" 230V 50/60Hz
€67.09
Sirai solenoid 2 way valve with base mounting 230V 50Hz
Sirai solenoid 2 way valve with base mounting 230V 50Hz
€73.77
Sirai 3 way solenoid valve 1/8" 1/8"230V 50/60Hz
Sirai 3 way solenoid valve 1/8" 1/8"230V 50/60Hz. Differential pressure 0-10bar (GAS), 0-8bar (Liquid), Maximun pressure 30bar. Temperature 0-130°C.
€90.46
Parker 2 way solenoid valve 1/4" 1/4" 110V 50/60Hz
The solenoid valve on this page is a water inlet valve made by the company Parker, this valve has been manufactured in Italy. The parker part number is 397484
This solenoid valve has a inlet and outlet which have a ¼” BSP-G thread in the inside. The orifice in the middle of this valve has a diameter of 3mm and is sealed off with a FKM seal. The coil used...
€69.21
Parker 2 way solenoid valve 230V 50/60Hz
On this page you will find a 2 way solenoid valve made by the Parker company which isn’t that common model. This model is mainly used on San Remo as a water inlet valve solenoid. The Parker part number for this item is 397892
This solenoid valve is a 2 way solenoid valve which is a flanged model. This valve seals to a other surface with 2 small o rings,...
€151.68
Parker 2 way stainless steel solenoid valve 220/240V 50/60Hz Dn1.5mm
On this page you will find a Parker 2 way solenoid valve. This solenoid valve can be used on Astoria (18159002), San Remo (10303093A) and Wega (WY18159002) water inlet valves. The Parker part number for this solenoid valve is 2019F1GRG7XS03XS6
This 2 way solenoid valve is of the new design, so no brass base but a stainless steel one which is NSF...
€138.94
Parker 2 way stainless steel solenoid valve 220/240V 50/60Hz Dn2.5mm
Parker 2 way stainless steel solenoid valve 220/240V 50/60Hz Dn2.5mm. Stainless steel pilot and special seals FDA - Ruby, 0-10 bar
€241.93
Lucifer solenoid valve 2 ways 1/8" 1/8" 220/240V 50/60Hz with flow regulation
The solenoid valve listed on this page is not just a 2 way solenoid valve, it is adjustable. You will find this specific model of solenoid valve on La Spaziale espresso machines. The La Spaziale part number for this item is 00907.
The coil used on this valve is a 9W 220/240v at 50/60 Hz the coil part number for this solenoid valve is 483510S6. The orifice...
€150.81
Fluid o tech vibration pump 45W 24V
On this page you will find a vibration pump, not from Ulka, but from Fluid o tech. Fluid o tech is less known for their vibration pumps. The fluid o tech vibration pump on this page is part 1106PAAAM1E0000
This specific vibration pump has 45W but runs on 24V at 50/60Hz. The vibration pump as on both sides a 1/8” BSP-G female fitting. The pump is no...
€124.98
Ulka vibration pump EAXS5 120V with brass outlet
Ulka vibration pump EAXS5 120V with brass outlet. Max pressure 15 bar, Max flow rate 650 cc/min. Correct working: 1 min. ON / 1,5 min. OFF.
€42.94
RPM clamp ring motor 165W 230V 50Hz with junctionbox
The main manufacturer of espresso machine motor pumps comes from Italy and that is RPM. This coffee machine motor has also been manufactured by RPM, with the model number 11002755.
The motor procures 165W 220V with 50Hz. To start up the motor the capacitor needs 10 µf. The special thing with this motor. It has a junction box mounted on the side of the...
€195.19
Faema ariete aluminium boiler ring 16 holes 246X210X10mm
Faema ariete aluminium boiler ring 16 holes 246X210X10mm
€69.80
Faema E64 aluminium boiler ring 10 holes
Faema E64 aluminium boiler ring 10 holes 190X142X10mm
€42.94
Rancilio group injector pipe 127mm
On this page you will find a injector tube for the Rancilio espresso machine. This injector tube has the Rancilio part number 21014234. This injector tube is placed at the bottom of the heat exchanger in the boiler.
This part has a length of 127mm. The section which threads into the boiler has a 3/8” BSP-G thread. The threads which stick out of the...
€31.24
Astoria Wega boiler injector tube
The tube on this page is a OEM/Original Astoria CMA spare part, so you can use this item on various Astoria and Wega espresso machines. The Astoria part reference for this item is 52000410 and the Wega part reference for this item is WY4952000410
This item is made up out of 2 pieces, a tube and a L fitting. The tube has a outer diameter of 6mm and a...
€43.46