Filter by
Categories
Price
€ €
Shop by Manufacturer
Filter

Home

Brasilia rubber valve stud Brasilia rubber valve stud

Brasilia rubber valve stud

The valve axle on this page is suitable for a variety of Brasilia espresso machine models. This steam and water valve shaft has the Brasilia part reference of 12046.4.00.09 This steam and water valve shaft has a overall length of 100mm and comes with a sealing gasket already installed. You can use this valve not in combination with the ceramic valves....
€19.03
Quick-view
Astoria/Wega group cap 18mm

Astoria/Wega group cap 18mm

The fitting cap on this page is a OEM/Original Astoria Wega spare part. The Astoria part reference for this item is 25789301 and the Wega part reference is WY25789301. This brass machined cap has a outer diameter of 18mm and has been made in Italy. You can use this cap on the Wega Start, Wega Venere, Astoria Brava, Astoria Rapallo, and the Astoria Sibilla.
€66.15
Quick-view
Astoria chromed clamping ring Astoria chromed clamping ring

Astoria chromed clamping ring

The item on this product page is a filter holder coupling, this coupling is used on various Astoria CMA espresso machines. This item is a OEM/Original Astoria Spare part. The Astoria part reference numbers for this item are 25250, 4825250 and 53030. At some point it can occur that your portafilter coupling ring doesn’t function properly...
€289.74
Quick-view
Solenoid valve permanent magnet Solenoid valve permanent magnet

Solenoid valve permanent magnet

The item on this page is a flat a permanent magnet used on solenoid valves. This type of part is mainly used on older espresso machines. These are used with brands such as Bezzera, Spaziale, Pavoni and Brasilia. The Bezzera part reference number is 5963015, the Pavoni part reference numbers are 360006 and 394740. The La Spaziale part reference number...
€37.70
Quick-view
La San Marco sliding bushing 7x10mm La San Marco sliding bushing 7x10mm

La San Marco sliding bushing 7x10mm

The item on this product page is a OEM/Original La San Marco spare part. This is a sliding bushing used on the manual brewing groups, so not the leva brewing groups. The part reference number for this item is 205175. This sliding bush is made from brass. and has a diameter of 7x10mm.
€3.12
Quick-view
La San Marco group shower EN gasket 51x19x1mm La San Marco group shower EN gasket 51x19x1mm

La San Marco group shower EN gasket 51x19x1mm

This group gasket is used in various older La San Marco espresso machines. This gasket goes between the brewing group and the shower holder plate itself. There is no part reference number available for this item. This gasket is made from a universal type of carbo gasket material. The outer diameter is 51mm the inner diameter is 19mm and the thickness is...
€2.26
Quick-view
Crushable copper washer 13.5x10x1.5 mm 1/8" Crushable copper washer 13.5x10x1.5 mm 1/8"

Crushable copper washer 13.5x10x1.5 mm 1/8"

The gasket on this product page is called crushable copper gasket. This gasket can be used to seal off male threads of 1/8”. When the fitting has been loosened it is advised to replace the copper gasket as well. The gasket has a outer diameter of 13mm a inner diameter of 10mm and a thickness of 1,5mm.
€1.55
Quick-view
Fluid o tech pump 100 L/H NSF Fluid o tech pump 100 L/H NSF

Fluid o tech pump 100 L/H NSF

The part on this product page is a pump made by the Italian company Rotoflow Fluid o Tech. This model of espresso machine pump can be used on various espresso machine brands such as Astoria, Carimali, Dalla Corte, San Marco and Wega. The Wega part reference is WY4626303001, the Astoria part reference is 4626303001 and the Carimali part reference number is...
€123.85
Quick-view
Faema group locking gasket Faema group locking gasket

Faema group locking gasket

The group locking gasket on this page can be used on various older Faema espresso machines. The Faema part reference for this item is 47014117206. This fibre gasket has a length of 80mm a width of 21mm and a thickness of 2mm. The distance between the holes is 60mm. This gasket has been made in Italy. You can use this gasket on the following Faema...
€5.06
Quick-view
Faema No stop drain valve Faema No stop drain valve

Faema No stop drain valve

This brewing group spare part is used on various older Faema brewing groups. The Faema part reference number for this item is 3161116451.  This valve part is used in the exhaust side of the brewing group. This valve part has been made from machined brass. on the inside of the gasket holder is a gasket already installed. This item has been made in...
€11.17
Quick-view
Vibiemme solenoid group locking gasket Vibiemme solenoid group locking gasket

Vibiemme solenoid group locking gasket

The group locking gasket on this product page is used with a variety Vibiemme solenoid groups. The Vibiemme part reference for this item is GUARGRKO. This paper gasket is rectangular with 5 holes. The gasket is 72mm with 64 mm and a thickness of 2mm. This gasket has been made in Italy. You can use this group locking gasket on the Vibiemme Evolution,...
€5.04
Quick-view
La San Marco group discharging tube La San Marco group discharging tube

La San Marco group discharging tube

The item on this product page is a drain pipe used on various La San Marco espresso machines. This drain pipe is used on older models La San Marco brewing groups. The part reference numbers for this item are 205751 and CCMMIN2790.  This drain tube has been made from brass. the fitting on the top is a 1/8” fitting. The Length of the tube...
€55.16
Quick-view
Transparant drain hose 14x20mm Transparant drain hose 14x20mm

Transparant drain hose 14x20mm

the item on this product page can be used as a espresso machine drain hose. This drain hose is made from a clear flexible plastic, but has been reinforced with steel wiring. This drain hose has a inner diameter of 14mm and a outer diameter of 20mm. the hose itself is made from a food safe plastic and has been made in Germany. This drain hose material is...
€9.08
Quick-view
Transparant drain hose 12x18mm Transparant drain hose 12x18mm

Transparant drain hose 12x18mm

the item on this product page can be used as a espresso machine drain hose. This drain hose is made from a clear flexible plastic, but has been reinforced with steel wiring. This drain hose has a inner diameter of 12mm and a outer diameter of 18mm. the hose itself is made from a food safe plastic and has been made in Turkey. This drain hose material is...
€9.95
Quick-view
Transparant drain hose 18x25mm Transparant drain hose 18x25mm

Transparant drain hose 18x25mm

the item on this product page can be used as a espresso machine drain hose. This drain hose is made from a clear flexible plastic, but has been reinforced with steel wiring. This drain hose has a inner diameter of 18mm and a outer diameter of 25mm. the hose itself is made from a food safe plastic and has been made in Turkey. This drain hose material is...
€14.66
Quick-view
Hose clamp 16/27mm Hose clamp 16/27mm

Hose clamp 16/27mm

The item on this product page is a steel hose clamp. This hose clamp can be used on various applications, not even espresso machine related. The hose clamps are mainly used for connecting drain hoses to the drain cups. This model of hose clamp can be used on tubes which range from 16mm up to 27mm. The clamps have a height of 9mm. They are made from zinc...
€2.01
Quick-view
Hose clamp 20/35mm Hose clamp 20/35mm

Hose clamp 20/35mm

The item on this product page is a steel hose clamp. This hose clamp can be used on various applications, not even espresso machine related. The hose clamps are mainly used for connecting drain hoses to the drain cups. This model of hose clamp can be used on tubes which range from 23mm up to 35mm. The clamps have a height of 9mm. They are made from zinc...
€1.73
Quick-view
Hose clamp 12/20mm Hose clamp 12/20mm

Hose clamp 12/20mm

The item on this product page is a steel hose clamp. This hose clamp can be used on various applications, not even espresso machine related. The hose clamps are mainly used for connecting drain hoses to the drain cups. This model of hose clamp can be used on tubes which range from 12mm up to 20mm. The clamps have a height of 9mm. They are made from zinc...
€5.06
Quick-view
Hose clamp 8/12 mm Hose clamp 8/12 mm

Hose clamp 8/12 mm

The item on this product page is a steel hose clamp. This hose clamp can be used on various applications, not even espresso machine related. The hose clamps are mainly used for connecting drain hoses to the drain cups. This model of hose clamp can be used on tubes which range from 8mm up to 12mm. The clamps have a height of 9mm. They are made from zinc...
€4.63
Quick-view
Hose clamp 35/50mm Hose clamp 35/50mm

Hose clamp 35/50mm

The item on this product page is a steel hose clamp. This hose clamp can be used on various applications, not even espresso machine related. The hose clamps are mainly used for connecting drain hoses to the drain cups and drain lines. This model of hose clamp can be used on tubes which range from 32mm up to 50mm. The clamps have a height of 9mm. They are...
€2.25
Quick-view
Wega Concept complete steam pipe Wega Concept complete steam pipe

Wega Concept complete steam pipe

The steam tube on this product page is a OEM/original Wega steam tube. This specific steam tube is used on the Wega Concept espresso machine. The Part reference number for this item is WY25763163. This steam tube is made from stainless steel. The tube has a diameter of 10mm, this tube has been fitted with a rubber anti burn protection. The developed...
€224.47
Quick-view
Grimac complete steam valve with steam wand Grimac complete steam valve with steam wand

Grimac complete steam valve with steam wand

On this product page you will find a complete steam valve for various Grimac espresso machines. The Grimac part reference for this item is 1200400082-GR118M  This complete steam valve comes with a chrome plated steam tube which has 4 steam nozzles. This entire valve has been manufactured in Italy. This steam valve can be used on the Grimac Zola I,...
€242.45
Quick-view
Brasilia 2000 rubber spear valve tap Brasilia 2000 rubber spear valve tap

Brasilia 2000 rubber spear valve tap

The item on this product page is a steam and water valve which can be used on various Brasilia espresso machines. This type is the valve with the rubber seals and not the ceramic ones. The Brasilia part reference number 11927.4.00.09 and 1192740009.   This steam and water valve has been made from casted brass which has been machined. This valve...
€74.36
Quick-view