Filter by
Categories
Price
€ €
Shop by Manufacturer
Filter

Home

Faema double portafilter with torpedo handle Faema double portafilter with torpedo handle

Faema double portafilter with torpedo handle

The portafilte ron this product page can be used on a variety of Faema espresso machine models. The Faema part references for this item are 2771133837/457888020 and 902714000. This double portafilter has a closed spout, the cover can be removed. The fitting of the spout is a 3/8” BSP-G thread. The ear orientation of the portafilter is 90 degree. The...
€55.68
Quick-view
Ball Valve 3/8 MF Ball Valve 3/8 MF

Ball Valve 3/8 MF

On this product page you will find a ball valve. This valve has been manufactured in Italy. This type of valve is used with a variety of brands like Marzocco, Nuova Simonelli and Victoria Arduino. The part numbers used for this item are for la Marzocco L164, for Nuova Simonelli 09000016 and for Victoria Arduino 09000016  The valve is a MF...
€11.00
Quick-view
Faema E98/A restyling touchpanel Faema E98/A restyling touchpanel

Faema E98/A restyling touchpanel

On this product page you will find a touchpad membrane for the Faema E98 President Restyling. But this item can as well be used on the La Cimbali M27-2008. The part number for this item is with Cimbali 915-400-000 and with Faema 915400000. This item is different then the touchpanel of the Faema E98 President, the colour of that touchpanel is blue. And of...
€63.65
Quick-view
Stainless steel steam stem 2 holes 1,5mm Stainless steel steam stem 2 holes 1,5mm
  • Out-of-Stock

Stainless steel steam stem 2 holes 1,5mm

On this page you will find a steam nozzle which can be used in combination with some models of Faema, Casadio and La Cimbali. The steam tube has a female 1/8”BSP-Gt thread. On each side of the steam tip there are 2 holes, both have a diameter of 1,5mm. There are 2 flattened spots on the nozzle, so that you are able to install a spanner on it when it is...
€9.77
Quick-view
Solenoid valve connector Solenoid valve connector

Solenoid valve connector

The product on this page is a solenoid valve connector, large F fitting. With this connector you can seal off and connect your wiring and solenoid valve to each other. These connectors can be used on all types of standard solenoid valve coils. Where the positive and negative are spaced apart approx. 17mm. This solenoid valve connector can be basically...
€3.47
Quick-view
Mazzer AER stop gasket Mazzer AER stop gasket

Mazzer AER stop gasket

Every Mazzer coffee grinder has this item installed. The AER gasket. This gasket is located between the coffee doser and the body or between the funnel and the body. The item has the part numbers S000GUA01 or S000GUA01/QQQ  You can find this item on the doser models of the Mazzer coffee grinder models: Mini, Lux, Super Jolly, Major, Kony, Robur, Royal and...
€5.22
Quick-view
Filterbasket spring 1,2mm 5 sides straight Filterbasket spring 1,2mm 5 sides straight

Filterbasket spring 1,2mm 5 sides straight

To hold a coffee filterbasket in it’s place there is always a spring installed in the portafilter. In each modern portafilter is a recess machines to accommodate such a spring. This spring is made from stainless steel. The cord diameter is 1,2mm. this spring has 5 flat sides. The spring is made in Italy.
€1.03
Quick-view
Single spout straight short 3/8" Single spout straight short 3/8"

Single spout straight short 3/8"

On this product page you will see a bit of a older design of single coffee spout, a small straight one. This model of coffee spout has been used in the past with a variety of espresso machine brands such as Faema, Carimali and Cimbali espresso machines. You can use this single coffee spout with any brand you would like. This coffee spout has been made...
€5.69
Quick-view
Fitting 1/2" hole dia 14mm Fitting 1/2" hole dia 14mm

Fitting 1/2" hole dia 14mm

A welding end cap nut is used to put pressure on the welding cap so it seals against the conical surface of it. Once there is not enough pressure from the back from the welding cap nut, the seal won’t work. This type of welding end cap is slightly different then the standard types of caps. You will see this type of fitting for instance on the water level...
€4.92
Quick-view
Female plug 1/4" Female plug 1/4"

Female plug 1/4"

A plug is a generic item which can be used in a variety of espresso machines. This specific version of the female plus is one which has a ¼”BSP-G thread.  You can use this type of fitting to seal off a variety of parts of your espresso machine, hydraulic system, brewing group valves and boiler This part is used in brands like Astoria...
€3.66
Quick-view
IMS E61 style shower screen fine mesh 60mm IMS E61 style shower screen fine mesh 60mm

IMS E61 style shower screen fine mesh 60mm

Next to the competition shower screen which has 200 µm there is also a competition shower which has 35 µm. So you can use this on a lot of brewing groups like on the Faema E61 and E61 style brewing groups. IMS filtri has given this 60mm shower screen item the part number E6135WM. This shower screen has a outer diameter of 60mm, the body diameter of this...
€13.65
Quick-view
IMS single cup filter basket 7/9 gr IMS single cup filter basket 7/9 gr

IMS single cup filter basket 7/9 gr

The filterbasket on this page is one of the most commonly found filter basket models. This model is made by IMS Filtri in Italy. The basket is from the competition line and not the standard line. The single filterbasket on this page has the IMS product code B701TH26.5E This single filterbasket can hold ground coffee from 7 grams up to 9grams. The basket...
€27.31
Quick-view
Valve rod washer 12x8x1mm Valve rod washer 12x8x1mm

Valve rod washer 12x8x1mm

The brass washer on this product page is used in various espresso machines made by Astoria and Wega. The Astoria part number for this item is 25655 and the Wega part number is WY25655. This brass washer has a outer diameter of 12mm a inner diameter of 8mm and a thickness of 1mm. This washer is used to spread the pressure of the steam and water shaft...
€1.19
Quick-view
Spring for steam and water valve 10,5x32mm Faema P4 spring for valve

Spring for steam and water valve 10,5x32mm

This steam and water valve compression spring is one of the most used compression springs. You will find them with a variety of espresso machine brands such as Faema, Pavoni, La Scala, Vibiemme, la Marzocco and San Remo. The part references can be found in the extra info tab. This stainless-steel compression spring has a outer diameter of 10,5mm and a...
€1.38
Quick-view
Vibiemme heating element 1200W 230V Vibiemme heating element 1200W 230V

Vibiemme heating element 1200W 230V

On this page you will find a espresso machine heating element suitable for the Vibiemme Domobar Junior and for the Vibiemme Domobar Super (ELETRESD12230). This specific heating element gives 1200W with 230V at 50/60Hz. The connection on this specific model has 2 legs both with male 6,3x0,8mm connectors. The element itself is made from copper and the...
€87.51
Quick-view
Bezzera level regulator RL30/4ESS/F 120V Bezzera level regulator RL30/4ESS/F 120V

Bezzera level regulator RL30/4ESS/F 120V

On this product page you will find a level regulator suitable for various Bezzera espresso machine models. This level regulator has been manufactured by the Italian company Gicar, part reference number of this item is 9.1.24.21G The designated name of this regulator is RL30/4ESS/F and runs on 120V. You can use this level regulator on the Bezzera B2000,...
€156.40
Quick-view
La Cimbali boiler gasket 180x140x3mm La Cimbali boiler gasket 180x140x3mm

La Cimbali boiler gasket 180x140x3mm

On this page you will find a boiler gasket suitable for a variety of La Cimbali espresso machines. The La Cimbali part reference for this item is 401-331-010 The boiler gasket on this page has a outer diameter of 180mm a inner diameter of 140mm and a thickness of 3mm. There are in total 6 bolt holes in the gasket. This gasket has been made in Italy. You...
€13.65
Quick-view
Stainless steel filter for large pump 18x2.5 mm Stainless steel filter for large pump 18x2.5 mm

Stainless steel filter for large pump 18x2.5 mm

On this page you will find a stainless-steel water filter. Suitable for pumping the water of the pumps used on espresso machines manufactured by the Cimbali Group. This filter is used with the Casadio part number 490055000, Cimbali part number 490-055-000 and the Faema part number 490055000. This stainless-steel wire mesh filter has a outer diameter of...
€5.67
Quick-view
Astoria bottomless portafilter Astoria bottomless portafilter

Astoria bottomless portafilter

The bottomless portafilter on this product page can be used on a variety of Astoria espresso machines. The Astoria part reference number for this item is 27311004.  The portafilter has a ear orientation of 45 degree, the ear thickness is 6mm. The portafilter does come with a double filter basket and stainless steel spring. This portafilter is made in...
€60.39
Quick-view
IMS cimbali 2 cup filterbasket 12/18gr IMS cimbali 2 cup filterbasket 12/18gr

IMS cimbali 2 cup filterbasket 12/18gr

On this page you will find a filter basket made by IMS Filtri in Italy. This specific model of filter basket doesn’t come from their standard line, but from the Competition series.  The article number for this double filterbasket is: B682TH24.5M The filterbasket tis suitable for a double dose, or 2 cups. The range you can fill the filterbasket with coffee...
€28.82
Quick-view
Bezzera OEM conical seal 5190501 PTFE ø13x6x6 mm for water and steam pipe Bezzera OEM conical seal 5190501 PTFE ø13x6x6 mm for water and steam pipe

Bezzera OEM PTFE conical seal 5190501 ø13x6x6 mm

This OEM conical seal is made from high-quality PTFE and is used for water and steam pipe connections in a wide range of Bezzera espresso machines. Measuring ø13x6x6 mm, it ensures a secure and heat-resistant seal that helps maintain pressure and prevents leaks. OEM part for Bezzera machines Material: PTFE (polytetrafluoroethylene) Dimensions: ø13...
€3.59
Quick-view
Faema E61 cup warming grid 215x390mm Faema E61 cup warming grid 215x390mm

Faema E61 cup warming grid 215x390mm

This cup warming grid can be used on the E61 espresso machines of Faema. So on the old one from the 1960’s but also on the new E61 jubilee and the E61 Legend coffee machines. This cup warming grid is 390mm with 215mm. This 2 group cup warming grid has the Faema part reference number 4512-135 863
€6.64
Quick-view