La Carimali ptfe gasket 24x20x1.5mm

The pump on this page is made by the Italian company Nuert. This company is not as well-known as companies like Procon and Fluid o tech. This specific pump is used only on Rancilio espresso machines. The Nuert part number for this pump is: APR2AZ1N_AGRA and is NSF approved. This pump is a rotation pump with a clamp connection. So, the pump is clamped...

This tamper is made from Stainless steel EN 1.4301/AISI 304 with a smooth machined finish. The bases are laser engraved with our logo and the 51,5 mm diameter of the base of the tamper. All our tampers are made in The Netherlands The handle is made from birch which has been hand oiled 2 times. Try to avoid contact with water. Seen the handles are natural...

On this product page you will find a touch panel membrane for the La Cimbali M20 espresso machine. This membrane has the Cimbali part reference of 422-111-020. This touchpanel membrane has in total 5 buttons. 4 of those buttons are volumetric and the last one is the continuous/programming key. With this push button you can also adjust the volume of water...

The heating element listed on this page is suitable for various Rancilio 3 group espresso machines. The matching Rancilio part number for this item is 33323430  This specific heating element produces 4300W and can run on 230/400V. The element has 6 poles with male spade connectors. The immersed length for this heating element 375mm. in between the...

The o ring on this page is used on various Gaggia and Saeco espresso machines. mainly in water and steam valves. The part reference for Gaggia is DM0041/107 and WGADM0041/107. For Saeco it is WGADM0041/107. This o ring has been made from FKM. the cord diameter is 1,78mm and the internal diameter is 15,60mm. This o ring has been made in Italy. This...

On this page you will find a boiler safety valve 3/8” male with a present of 1,8 bar. This safety valve is, at own responsibility, adjustable. This can be done by tightening or untightening the Allan key slot in the top of the valve. Inside this safety valve has a stainless steel spring inside, the sealing material is FKM. This is a non certified...

The PTFE gasket on this page can be used on a variety of espresso machines brands and various applications. You will mainly find this gasket as a seal with water and steam valves, but you can also find them in brewing groups. This PTFE gasket has a outer diameter of 21mm a inner diameter of 16,8mm and a thickness of 2mm. You can use this flat gasket in...

With Faema and La Cimbali flange pumps there is a additional coupling between the flanged motor and the flanged pump. This coupling is made of 2 metal couplings. 1 connects to the espresso machine motor shaft, the other connects to the pump. Note: this coupling has a round shaft opening with a flat side. The metal connectors have a OD of 40mm. In between...