La Pavoni Vasari S - Brewing group
La Pavoni Vasari S - Brewing group
There are 14 products.La Pavoni Vasari S espresso machine parts brewing group
Compression spring 14x33mm
(0) This stainless steel spring 14x33mm is used in a variety of locations in a espresso machine. The most common location for this compression spring is in a Faema E61 brewing group of a E61 style brewing group. The spring seats inside the top trumpet and makes sure that the top brewing valve closes when the brewing process is stopped, and the lever has...
Stainless steel filter 8.6x22.5mm
(0) The item on this product page is a stainless steel water filter, this filter is used with various espresso machine brands in the top of the brewing group. You can find this filter with brands such as ECM Heidelberg, San Remo, Vibiemme, La Scala, Bezzera, Grimac, Astoria, La Pavoni and wega. This stainless steel water filter has a outer diameter of 8,5mm...
PTFE gasket 35x30x2mm
(0) The gasket on this page is a Polytetrafluoroethylene (PTFE) gasket with the dimensions 35x30x2mm. This specific gasket is used on 3 specific places on the E61 style brewing group (the Faema E61 and Faema E61 legend group use a different size of ptfe gasket). It is used to seal off the top trumpet or drain sleeve, on the side of the group the camme holder...
Locking group gasket
(0) If you want to attach a E61 style brewing group to the espresso machine there is normally a gasket inbetween the brewing group and metal frame. In this case a 2mm paper gasket with a width of 70 and a height of 80mm. This gasket type used on a variety of E61 style brewing groups from the brands: San Remo, Royal, Reneka, La Scala, Vibiemme, Grimac, Wega,...
E61 style camme rod
(0) This camme rod for E61 style espresso machines is slightly different then the one used in the Faema E61. This one has a small guide pin at the end which goes inside the group. On the other side there is a squared off section for the lever arm. This section is 6x6mm. To hold the lever in place there is a M6 thread on the end for some sort of a nut. This...
O ring 20.63x2.62mm viton
(0) On this page you will find a o ring which has a cord diameter of 2,62mm and a internal diameter of 20,63mm. the material for this o ring is Viton. The application in espresso machines for this o ring is really broad. This ranges from application in brewing groups with brands like ECM Heidelberg, la Scala, Bezzera and Brasilia. But also the application in...
Faema E61 valve gasket 15,5x7,5x4mm
(0) This gasket is again such a standard type of gasket in the world of espresso coffee machines. It is the EPDM gasket 15.5x7.5x4mm. This gasket is used a variety of applications on espresso machines. Offcourse on the Faema E61 brewing group as well for the E61 style brewing group, as the camme shaft gasket. By brands like Isomac, Bezzera, ECM, Brasilia,...
E61 style spring holder
(0) The item on this product page is a spring guide bushing used on various E61 Style of brewing groups. You can use this item with brands such as ECM Heidelberg, La Scala, Bezzera, Isomac, Pavoni and Brasilia. The Bezzera part reference is 7479942, the Brasilia part reference number is 13657.0.00.04, for ECM Heidelberg it is B7479942, for Isomac ISBUS313116...
PTFE gasket 3/8" 22x16.5x2mm
(0) The item on this product page is a PTFE gasket. This gasket is used on a variety of brands with applications such as steam and water valves, sight glasses and brewing groups. you can use this PTFE gasket on brands such as ECM Heidelberg, San Remo, Vibiemme, La Scala, Rancilio and Grimac. The part reference numbers can be found in the extra info tab. This...
Faema E61 group upper plug
(0) On the top of a Faema E61 brewing group or a E61 brewing group is always the final item. That’s a chrome plated 3/8” male plug. Nothing else nor something special. This is generic part which can also be used in a variety of situations then a E61 brewing group, but also on different locations on a espresso machine. Like on the boiler with a...
E61 style groups shower without welding 60mm
(0) The function of a shower screen is to spread the water coming out off the group on a equal way over the coffee. One of the standardized sizes and most common, is the 60mm shower screen. This shower is a pressed model made by IMS IMSDR300. The outer diameter is 60mm, the internal height is 17mm and the diameter of the punctured holes is 2,5mm Note: this...
Knob M8x1,25mm
(0) This small rounded off knob is used on steam and water valves, but also on handles of brewing groups. You can find this handle on a variety of brands such as Vibiemme, Wega, Astoria, Grimac, and ECM Heidelberg. This black knob has a high gloss finish. The thread inside is a M8 with a pitch of 1,25mm. The item has been made in Italy. You can use this...
Faema E91 flat portafilter gasket 73x57x8.5mm
(0) The portafilter gasket on this page can be used on various older Faema espresso machine models. The gasket is made from NBR. The outer diameter of this portafilter gasket is 73mm the inner diameter is 57mm and the thickness is 8,5mm. The Italian made gasket has 4 internal cuts. You can use this portafilter gasket on the Faema E91, Faema E92, Faema E97,...
Drain valve chrome plated
(0) This chrome plated drain valve is used on a variety of espresso machine brands and models which use the E61 style brewing group. The item has a overall length of 26mm and a male thread of ½”. The drain fitting holds the drain jet in place, this part is used a spring support for the drain valve spring. This coffee machine part for the E61...
