€74.46 tax excl.
GDPR Compliance
Protecting your personal data
Shipping policy
Everything about shipping your order
Return policy
all the inns and outs about our return policy
On this page you will find a heating element suitable for various La San Marco models. This specific model has been made for a 2 group boiler. The La San Marco part reference is 108351
This heating element runs on 4500W at 230/400V and has 6 poles. The immersed length of is 330mm. In the middle of the element is also a spare tube for a heating element thermostat. The flange on this heating element is 75x50mm and the holes are spaced 59mm apart.
The gasket used on this heating element has a outer diameter of 50mm a inner diameter of 40mm and a thickness of 2mm.
You can use this heating element on San Marco models such as. The San Marco 85 Spring S/E and the San Marco 95 Practical-Sprint.
Data sheet
This does depend of which brand of espresso machine you have. Some espresso machine brands don’t use a heating element thermostat at all. Most thermostats are interchangeable with each other, but always make sure that you use a single phase or a 3 phase version, check out the thermostats we have on our website
Well first of all the heating element flange, seen those are in most cases not interchangeable with each other. seen a Cimbali heating element won’t fit a Nuova Simonelli heating element due to the flange model. A other important feature is the length of the heating element. When it is too long, it won’t fit. When the element is too short you will get uneven heat distribution in the boiler.
Well descaling a heating element is quite simple. A heating element can be placed inside a water tight tube. But the flange can not be submerged, the chance that water gets inside the heating element is possible. Which shorts out the element and makes it unuasable.
To descale a heating element you can use Puly caff Calcinet descaler, this need to be dissolved into hot water. First remove the loose lime scale. If it doesn’t remove all the limescale, repeat the procedure.
A heating element only comes with a gasket when this is specified. If this is not specified a heating element gasket isn’t supplied with the element.
