€72.60 tax excl.
GDPR Compliance
Protecting your personal data
Shipping policy
Everything about shipping your order
Return policy
all the inns and outs about our return policy
This heating element is suitable for a 2 group La Spaziale espresso machine. This specific heating element generates 2800W at 220/380V. This heating element is suitable in combination with the La Spaziale part number 05504
The immersed length of this heating element is 355mm, this is the distance from the tip to the inside of the flange. The flange used on this heating element is 85x85mm. the distance between the holes is 63mm.
To seal off this heating element you would have multiple options. You can go as how they where done originally with a o ring(Spaziale part number 02418) but you can also go for a PTFE or fibre gasket which are cut in the sizes of the heating element flange.
This heating element is suitable for a variety of La Spaziale espresso machine models like the La Spaziale New, La Spaziale Seletron Plus, La Spaziale Super 3000, La Spaziale S3, La Spaziale S40 and the La Spaziale S5.
Always verify the dimensions with your original La Spaziale heating element before ordering. Seen parts do change over time.
Data sheet
This does depend of which brand of espresso machine you have. Some espresso machine brands don’t use a heating element thermostat at all. Most thermostats are interchangeable with each other, but always make sure that you use a single phase or a 3 phase version, check out the thermostats we have on our website
Well first of all the heating element flange, seen those are in most cases not interchangeable with each other. seen a Cimbali heating element won’t fit a Nuova Simonelli heating element due to the flange model. A other important feature is the length of the heating element. When it is too long, it won’t fit. When the element is too short you will get uneven heat distribution in the boiler.
Well descaling a heating element is quite simple. A heating element can be placed inside a water tight tube. But the flange can not be submerged, the chance that water gets inside the heating element is possible. Which shorts out the element and makes it unuasable.
To descale a heating element you can use Puly caff Calcinet descaler, this need to be dissolved into hot water. First remove the loose lime scale. If it doesn’t remove all the limescale, repeat the procedure.
A heating element only comes with a gasket when this is specified. If this is not specified a heating element gasket isn’t supplied with the element.
